DOWNLOAD Sony KDL-46XBR8 / KDL-55XBR8 Service Manual ↓ Size: 15.38 MB | Pages: 127 in PDF or view online for FREE

NTSC  

American 

TV 

Standard

ATSC (8VSB terrestrial)  ATSC compliant 8VSB
QAM on cable 

ANSI/SCTE 07 2000

Analog
 2-69 

Terrestrial

 1-135 

Cable

Digital
 2-69 

Terrestrial

 1-135 

Cable

75-ohm external terminal for RF inputs

LCD (Liquid Crystal Display) Panel

1,920 dots x 1,080 lines

approx. 46 inches (KDL-46XBR8 Only)
approx. 54.6 inches (KDL-55XBR8 Only)

Remote Commander RM-YD024
Two Size AA (R6) Batteries
AC Power Cord 
Cable Holder (1 attached to the TV)
Table-Top Stand (1) and Screws (4) (KDL-46XBR8 Only)
Operating Instructions
Quick Setup Guide
Warranty Card
Safety and Regulatory Booklet
Attaching the Table-Top Stand (KDL-46XBR8 Only)

Connecting Cables
Support Belt Kit
Wall-Mount Bracket
 SU-WL500

20 x 140

33 x 100

13/16

 x 5

5/8

1

5/16

 x 4

N/A

30

N/A

1

3/16

1,259 x 737 x 315

1,486 x 855 x 356

49

5/8

 x 29

1/8

 x 12

1/2

 in

58

5/8

 x 33

3/4

 x 14

1/8

 in

1,259 x 685 x 144

1,486 x 803 x 147

49

5/8

 x 27 x 5

3/4

 in

58

5/8

 x 31

5/8

 x 5

7/8

 in

300 x 300

400 x 300

38 kg

54 kg

84 lbs

120 lbs

33 kg

47.5 kg

73 lbs

105 lbs

All measurements are approximations.

10W +10W, 12W + 12W (Woofer)

50 x 100

M6 8-12 mm

2 x 4

These servicing instructions are for use by qualifi ed service personnel only. To reduce the risk of electric shock, do not perform any servicing other 
than that contained in the operating instructions unless you are qualifi ed to do so.

"E

s "EFORE

PEOPLE

s 7HEN

ILLUSTRATED

s ,IFT

UNDERNEATH

+$, 8"2

+$, 8"2

"E

An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is 
directly connected to the ac power line.

!

 SAFETY-RELATED COMPONENT WARNING!!

Components identifi ed by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace 
these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that 
are critical for safe operation are identifi ed in this manual. Follow these procedures whenever critical components are replaced or improper operation is 
suspected. 

Ces instructions de service sont à l’usage du personnel de service qualifi é seulement. Pour prévenir le risque de choc électrique, ne pas faire 
l’entretien autre que celui contenu dans le Mode d’emploi à moins que vous soyez qualifi é faire ainsi.

!SSUREZ VOUS

s !VANT

TOUS

s ,E

ãTRE

s ,ORSQUE

MAINS

s 3OULEVEZ

VOTRE

+$, 8"2

+$, 8"2

6EILLEZ

Afi n d’eviter tout risque d’electrocution provenant d’un chássis sous tension, un transformateur d’isolement doit etre utilisé lors de tout dépannage. Le 
chássis de ce récepteur est directement raccordé à l’alimentation du secteur.

!

 ATTENTION AUX COMPOSANTS RELATIFS A LA SECURITE!!

Les composants identifi es par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une 
importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le 
present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement 
sont identifi es dans le present manuel. Suivre ces procedures lors de chaque remplacement de composants critiques, ou lorsqu’un mauvais 
fonctionnement suspecte.

There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and 

mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number 
specifi ed in the electrical parts list to prevent electric shock, fi re, or other hazard. 

NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and 
            labor guarantee. 

When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. 

 do not press on the panel or frame edge to avoid the risk of electric shock.

  do not scratch or press on the panel with any sharp objects.

  do not leave the module in high temperatures or in areas of high humidity for an extended period of time.

  do not expose the LCD panel to direct sunlight.

  avoid contact with water. It may cause a short circuit within the module. 

  disconnect the AC adapter when replacing the backlight (CCFL) or inverter circuit. 

(High voltage occurs at the inverter circuit at 650Vrms.) 

  always clean the LCD panel with a soft cloth material.

  use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short. 

  protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).