Sony KDL-46X3000 / KDL-52X3000 / KDL-52X3500 Service Manual ▷ View online
KDL-46/52X3000, 52X3500 (K) 1-12E
KDL-52X3000/52X3500
1-2-11. LCD PANEL AND BEZEL ASSY REMOVAL
1
Six screws
(+BVTP2 4X16)
2
LCD panel
1
Four screws
(+BVTP2 4X16)
3
One screw
(+BV 3X12)
4
Center cabinet
5
One screw
(LINE HEX PSW M3X12)
6
bezel assy
7
One screw
(M2 tapping)
0
Ornametal joint
8
Two screws
(FIXED)
qa
One screw
(M2 taping)
qs
Six screw
(FIXED)
8
Two screws
(FIX)
7
One screw
(M2 taping)
9
Ornamental frame V
0
Ornamental joint
qk
One screw
(M2 taping)
qg
Four screws
(FIXED)
qd
Ornamental frame H
w;
Ornamental
frame H
qf
One screw
(M2 taping)
qf
One screw
(M2 taping)
3
One screw
(+BV 3X12)
qh
Ornamental
frame V
qj
Ornamental
joint
qj
Ornamental joint
qk
One screw
(M2 taping)
ql
Six screw
(FIXED)
KDL-46/52X3000, 52X3500 (K) 2-1
SECTION 2
SERVICE ADJUSTMENTS
2-2. ACCESSING SERVICE ADJUSTMENTS
To adjust various set features, use the Remote Commander to put
the set into service mode to display the service menus.
the set into service mode to display the service menus.
1. To must be in standby mode (Power off).
2. Press the following buttons on the Remote Commander within
2. Press the following buttons on the Remote Commander within
a second of each other:
The first service menu (TV) displays.
3. To display the service menu that contains the category you
want to adjust, press
on the Remote Commander.
2-1. REMOTE ADJUSTMENT BUTTONS AND
INDICARORS
KDL-46/52X3000, 52X3500 (K) 2-2E
The screen displays the first category in the selected service
menu.
4. To change the category, press 2 or 5 on the Remote Com-
menu.
4. To change the category, press 2 or 5 on the Remote Com-
mander.
Note
Note
: Pressing 2 or 5 only changes the categories within
the service menu displayed. To change a category on
one of the other service menu, press the
one of the other service menu, press the
button
until the correct service menu is displayed.
5. To change the adjustment item, press 1 or 4 on the Remote
Commander.
6. To change the data value, press 3 or 6 on the Remote Com-
mander.
7. To write into memory, press
then - on the Remote
Commander.
8. To exit service mode, turn the power off.
KDL-46/52X3000, 52X3500 (K) 3-1E
SECTION 3
DIAGRAMS
3-1. CIRCUIT BOARDS LOCATION
(1) KDL-46X3000
(2) KDL-52X3000/52X3500
HW2 board
FB1 board
H4 board
AU board
H1 board
H3 board
DF2 board
DF3 board
UB1 board
GF1 board
TUU2 board
HW2 board
FB1 board
H4 board
AU board
H1 board
H3 board
DF4 board
DF5 board
UB1 board
GF2 board
TUU2 board
Click on the first or last page to see other KDL-46X3000 / KDL-52X3000 / KDL-52X3500 service manuals if exist.