Sony KDL-46NX800 / KDL-52NX800 / KDL-60NX800 / KDL-60NX801 Service Manual ▷ View online
KDL-46NX800/52NX800/60NX800/60NX801
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-3. SPEAKER BOX ASSEMBLY, HLR BOARD AND LCD PANEL HOLDER REMOVAL
A Lift up right-side Speaker Box Assembly to remove from Bezel
B Remove screws from Bottom Frame to detach from LCD Panel
B Remove screws from Bottom Frame to detach from LCD Panel
1 from KDL-46NX800/52NX800 Only
2 from KDL-60NX800/60NX801 Only
C Remove 2 screws from Bottom Frame to detach from Bezel
D Lift up left-side Speaker Box Assembly to remove from Bezel
D Lift up left-side Speaker Box Assembly to remove from Bezel
E Remove 1 screw from Antenna to detach from Bezel bottom
F Disconnect 1 connector from HLR Board, then release clips and lift up to detach from LED
Guide
G Remove 1 screw from Antenna to detach from Bezel side
H Remove 2 screws from WIFI Card to detach from LCD Panel
I Remove 2 screws from LCD Panel Supports to detach from Bezel
151
1-858-378-21
SP BOX ASSEMBLY (RIGHT)
152
1-858-378-11
SP BOX ASSEMBLY (LEFT)
153
1-754-692-21
ANTENNA
154
A-1744-407-A
HLR BOARD, MOUNTED
155
1-754-692-11
ANTENNA
156
1-487-819-11
CARD, WIRELESS LAN
157
4-165-971-01
HOLDER, PANEL (S)
(KDL-46NX800/52NX800 ONLY)
157
4-167-678-01
HOLDER, PANEL (L)
(KDL-60NX800/60NX801 ONLY)
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
2-345-219-11
+B IB 3X-- CM3
2-580-592-01
SCREW, +PSW M3X8
4-159-298-01
SCREW, +PSW M4X10
152
154
153
151
155
156
157
C
D
F
E
B
A
H
I
I
G
KDL-46NX800/52NX800/60NX800/60NX801
17
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
1-4. GE2B/GE2A (POWER) BOARDS, BUHS BOARD, AND LCD PANEL REMOVAL
A Remove 5 screws from GE2B/GE2A (Power) Boards
B Disconnect 5 connectors from GE2B/GE2A (Power) Boards
B Disconnect 5 connectors from GE2B/GE2A (Power) Boards
C Slide Terminal Bracket to left-side to remove from BUHS Board
D Remove 8 screws from BUHS Board
D Remove 8 screws from BUHS Board
E Disconnect 5 connectors from BUHS Board
F Slide Side Jack Bracket to right-side to remove from BUHS Board
G Carefully Lift up Panel to remove from Bezel
201
A-1773-995-A
GLASS (46PIC) ASSEMBLY
(KDL-46NX800 ONLY)
201
A-1773-996-A
GLASS (52PIC) ASSEMBLY
(KDL-52NX800 ONLY)
201
A-1773-997-A
GLASS (60PIC) ASSEMBLY
(KDL-60NX800 ONLY)
201
A-1774-833-A
GLASS (60PIC_S) ASSEMBLY
(KDL-60NX801 ONLY)
202
NA
LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
203
X-2547-018-1
BRACKET, SIDE JACK T ASSEMBLY
204
A-1765-668-B
BUHS BOARD, COMPLETE
NOTE: For BUHS Board replacement, please refer to section
2-2. Setting the Destination after Replacing the BUHS Board or LCD Panel.
NOTE: Final software is not installed on this BUHS Board.
Install the update after replacing this board using the instructions
provided with the software.
205
4-172-021-21
BRACKET, TERMINAL T (UC)
(FOR US/CND MODELS ONLY)
205
4-172-021-51
BRACKET, TERMINAL T (UC_LA)
(FOR MX/LA MODELS EXCEPT KDL-60NX801)
206
1-474-212-11
GE2B (POWER) BOARD, COMPLETE
(KDL-46NX800/52NX800 ONLY)
206
1-474-211-11
GE2A (POWER) BOARD, COMPLETE
(KDL-60NX800/60NX801 ONLY)
2-580-592-01
SCREW, +PSW M3X8
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
D
E
F
G
B
C
A
204
203
202
201
206
205
KDL-46NX800/52NX800/60NX800/60NX801
18
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-5. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
1-6. SCREW LEGEND
1-7. CONNECTORS
251
1-837-666-12
CONNECTOR ASSEMBLY
(KDL-46NX800 ONLY)
251
1-837-667-12
CONNECTOR ASSEMBLY
(KDL-52NX800 ONLY)
* 251
1-837-532-12
CONNECTOR ASSEMBLY
(KDL-60NX800/60NX801 ONLY)
252
1-910-100-09
HARNESS ASSEMBLY (1)
(KDL-46NX800 ONLY)
* 252
1-910-100-12
HARNESS ASSEMBLY (1)
(KDL-52NX800 ONLY)
* 252
1-910-100-14
HARNESS ASSEMBLY (1)
(KDL-60NX800/60NX801 ONLY)
253
1-837-664-11
(LVDS) LEAD WIRE WITH CONNECTOR
(KDL-46NX800 ONLY)
253
1-837-668-11
(LVDS) LEAD WIRE WITH CONNECTOR
(KDL-52NX800 ONLY)
253
1-837-669-11
(LVDS) LEAD WIRE WITH CONNECTOR
(KDL-60NX800/60NX801 ONLY)
254
1-910-100-61
CONNECTOR ASSEMBLY 4P
(KDL-46NX800/52NX800 ONLY)
254
1-910-100-63
CONNECTOR ASSEMBLY 4P
(KDL-60NX800/60NX801 ONLY)
255
1-910-100-10
CONNECTOR ASSEMBLY 15P
(KDL-46NX800 ONLY)
* 255
1-910-100-13
CONNECTOR ASSEMBLY 15P
(KDL-52NX800 ONLY)
* 255
1-910-100-15
CONNECTOR ASSEMBLY 15P
(KDL-60NX800/60NX801 ONLY)
* 256
1-910-100-07
CONNECTOR ASSEMBLY 10P
257
1-487-762-11
ILLUMINATION MODULE
*
2-345-219-11
+B IB 3X-- CM3
(KDL-60NX800/60NX801 ONLY)
2-580-592-01
SCREW, +PSW M3X8
(KDL-46NX800/52NX800 ONLY)
CN6150
CN6151
CN6800
CN6801
CN6003
GE2A/GE2B
CN2602
CN2600
CN2561 CN3800
CN4300
BUHS
TCON
SP
SP
HLR
WIFI
ILLUMINATION MODULE
SWITCH UNI
T
P
O
WER
S
WI
TC
H
251
252
253
256
257
255
254
(KDL-46NX800/52NX800 ONLY)
(KDL-60NX800/60NX801 ONLY)
P/N
DESCRIPTION
REMARKS
TOTAL
■
2-580-603-01 SCREW, +PSW M4X16
RC(8)
8
□
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3
RC to TERMINAL(1), RC to SIDE JACK(1), BTM FRM to BEZ(2)
4
▼
2-345-219-11 +B IB 3X-- CM3
WIFI ANTENNA(2)
2
▽
2-580-608-01 SCREW, +PSW M5X16
TABLE-TOP STAND(4)
4
●
2-580-592-01 SCREW, +PSW M3X8
BUHS(8), GE2B(5), WIFI(2), LVDS(2), PNL HLDR(2)
19
○
4-159-298-01 SCREW, +PSW M4X10
UC to BTM FRM(4), BTM FRM to PNL(1), VESA BRKT to PNL(2)
7
★
4-178-167-01 SCREW, ORNAMENTAL
RC TOP-CENTER(2), RC BTM-CENTER(2)
4
P/N
DESCRIPTION
REMARKS
TOTAL
■
2-580-603-01 SCREW, +PSW M4X16
RC BTM(8), RC TOP(2)
10
□
2-580-639-01 SCREW, +BVTP 4X12 TYPE2 IT-3
RC to TERMINAL(1), RC to SIDE JACK(1), BTM FRM to BEZ(2)
4
▼
2-345-219-11 +B IB 3X-- CM3
WIFI ANTENNA(2), LVDS(2)
4
▽
2-580-608-01 SCREW, +PSW M5X16
TABLE-TOP STAND(4)
4
●
2-580-592-01 SCREW, +PSW M3X8
BUHS(8), GE2A(5), WIFI(2), AC(1), PNL HLDR(2)
18
○
4-159-298-01 SCREW, +PSW M4X10
UC to BTM FRM(3), BTM FRM to PNL(2), VESA BRKT to PNL(2)
7
★
4-178-167-01 SCREW, ORNAMENTAL
RC TOP-CENTER(2), RC BTM-CENTER(2)
4
KDL-46NX800/52NX800
KDL-60NX800/60NX801
KDL-46NX800/52NX800/60NX800/60NX801
19
DISASSEMBLY/PART NUMBER INFORMATION
1-8. ACCESSORIES AND PACKING
3-299-071-03
FLYER, SAFETY
4-178-676-18
MANUAL, INSTRUCTION (ENGLISH VERSION)
4-178-676-27
MANUAL, INSTRUCTION (FRENCH VERSION)
4-178-676-37
MANUAL, INSTRUCTION (SPANISH VERSION)
!
1-837-644-12
POWER-SUPPLY CORD SET
(KDL-46NX800/52NX800 ONLY)
!
1-837-633-12
POWER-SUPPLY CORD
(KDL-60NX800/60NX801 ONLY)
X-2547-088-2
SPACER ASSEMBLY (B)
REQUIRED WHEN USING A WALL-MOUNT BRACKET
(KDL-46NX800/52NX800 ONLY)
X-2547-089-2
SPACER ASSEMBLY (C)
REQUIRED WHEN USING A WALL-MOUNT BRACKET
(KDL-60NX800/60NX801 ONLY)
*
4-180-034-12
SUPPLEMENT (STAND INSTALLATION)
(KDL-46NX800/52NX800 ONLY)
1-9. MISCELLANEOUS
3-299-766-01
CATCHER
7-685-648-79
SCREW +BVTP 3X12 TYPE2 IT-3
X-2348-140-3
SUPPORT BELT KIT
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
4-119-044-01
+PSW6(W) STAND
(KDL-60NX800/60NX801 ONLY)
1-10. REMOTE COMMANDER
1-487-711-11
REMOTE COMMANDER (RM-YD037)
(US MODELS ONLY)
1-487-821-11
REMOTE COMMANDER (RM-YD052)
(CND/MX MODELS ONLY)
Click on the first or last page to see other KDL-46NX800 / KDL-52NX800 / KDL-60NX800 / KDL-60NX801 service manuals if exist.