Sony KDL-46NX800 / KDL-52NX800 / KDL-60NX800 / KDL-60NX801 Service Manual ▷ View online
KDL-46NX800/52NX800/60NX800/60NX801
12
CLEARING THE SELF CHECK DIAGNOSTIC LIST
Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen after you have
completed the repairs to be sure you have cleared the result display to “0”.
1. To clear the Error history and Error count: Press the Channel
8
Channel
0
.
2. To clear the Panel operation time: Press the Channel
7
Channel
0
.
EXITING THE SELF CHECK DIAGNOSTIC SCREEN
1. To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on
the TV.
SELF DIAGNOSIS FUNCTIONS
KDL-46NX800/52NX800/60NX800/60NX801
13
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
A Lift up Bottom Cover to detach from Rear Cover
B Remove 4 screws from Table-Top Stand Assembly
B Remove 4 screws from Table-Top Stand Assembly
C Lift up TV set to detach from Table-Top Stand Assembly
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
D Gently place the TV set face down onto a soft cloth
1
X-2546-092-1
BASE (L1A) ASSEMBLY
(KDL-46NX800 ONLY)
1
X-2546-093-2
BASE (LL1A) ASSEMBLY
(KDL-52NX800 ONLY)
1
X-2546-094-2
BASE (LLL1A) ASSEMBLY
(KDL-60NX800/60NX801 ONLY)
2
4-170-474-01
COVER, NECK (ML1 FRONT)
(KDL-46NX800 ONLY)
2
4-170-475-01
COVER, NECK (LL1 FRONT)
(KDL-52NX800 ONLY)
2
4-170-476-01
COVER, NECK (LLL3A FRONT)
(KDL-60NX800/60NX801 ONLY)
3
4-170-481-01
COVER, NECK (ML1 REAR)
(KDL-46NX800 ONLY)
3
4-170-482-01
COVER, NECK (LL1 REAR)
(KDL-52NX800 ONLY)
3
4-170-483-01
COVER, NECK (LLL1 REAR)
(KDL-60NX800/60NX801 ONLY)
4
4-170-445-01
NECK (ML1)
(KDL-46NX800 ONLY)
4
4-170-446-01
NECK (LL1)
(KDL-52NX800 ONLY)
4
4-170-452-01
NECK (LLL3A)
(KDL-60NX800/60NX801 ONLY)
5
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01
SCREW, +PSW M5X16
B
A
C
Soft Cloth
D
1
4
2
3
5
KDL-46NX800/52NX800/60NX800/60NX801
14
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
51
52
53
54
55
57
58
59
56
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-2. REAR COVER, KEY CONTROL MODULE AND POWER SWITCH REMOVAL
1-2-1. KDL-46NX800/52NX800 ONLY
A Remove 8 screws from Rear Cover
B Remove 4 screws from Rear Cover top and bottom center
B Remove 4 screws from Rear Cover top and bottom center
C Lift up Terminal Cover to remove from Rear Cover
D Remove 1 screw from Terminal position
D Remove 1 screw from Terminal position
E Remove 1 screw from Side Jack position
F Remove 4 screws from Under Cover to detach from Bottom Frame
54
4-170-646-21
COVER, UNDER
(KDL-46NX800 ONLY)
54
4-170-646-31
COVER, UNDER
(KDL-52NX800 ONLY)
! 55
1-842-031-11
AC INLET (2P)
56
4-164-305-01
BRACKET, VESA T (ML)
57
4-167-684-01
BRACKET, BUTTON (GS)
58
1-798-309-11
POWER SWITCH
59
1-487-835-11
KEY CONTROL MODULE
G Lift AC Inlet and
disconnect 1 connector to
remove from Under Cover
H Remove 2 screws from
Vesa Brackets to detach
from LCD Panel
I Lift up Switch Unit and
disconnect 1 connector to
remove from LCD Panel
J Slide out Power Switch
and disconnect 1
connector to remove from
Switch unit
K Lift up Button Bracket and
disconnect 1 connector to
remove from LCD Panel
NOTE: The Vesa Brackets
are not included with the
LCD Panel and must be
replaced when replacing
the LCD Panel
A
C
D
E
F
G
I
J
K
H
B
2-580-603-01
SCREW, +PSW M4X16
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
4-159-298-01
SCREW, +PSW M4X10
4-178-167-01
SCREW, ORNAMENTAL
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
51
X-2547-175-1
REAR COVER (46) ASSEMBLY)
(KDL-46NX800 ONLY)
51
X-2547-177-1
REAR COVER (52) ASSEMBLY
(KDL-52NX800 ONLY)
52
4-165-763-01
COVER, BOTTOM (40, 46)
(KDL-46NX800 ONLY)
52
4-165-764-01
COVER, BOTTOM (52)
(KDL-52NX800 ONLY)
53
4-185-199-01
COVER, TERMINAL
KDL-46NX800/52NX800/60NX800/60NX801
15
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
1-2-2. KDL-60NX800/60NX801 ONLY
A Remove 8 screws from Rear Cover Assembly
B Remove 4 screws from Rear Cover Assembly center
B Remove 4 screws from Rear Cover Assembly center
C Lift up Terminal Cover to remove from Rear Cover Assembly
D Remove 1 screw from Terminal position
D Remove 1 screw from Terminal position
E Remove 1 screw from Side Jack position
F Remove 2 screws from Rear Cover Top
G Remove 3 screws from Under Cover to detach from Bottom Frame
H Remove 1 screw from AC inlet
to detach from Bottom Frame
I Lift AC Inlet and disconnect 1
connector to remove from Under
Cover
J Remove 2 screws from Vesa
Brackets to detach from LCD
Panel
K Lift up Switch Unit and
disconnect 1 connector to
remove from LCD Panel
L Slide out Power Switch and
disconnect 1 connector to
remove from Switch unit
M Lift up Button Bracket and
disconnect 1 connector to
remove from LCD Panel
NOTE: The Vesa Brackets are
not included with the LCD Panel
and must be replaced when
replacing the LCD Panel
101
102
105
106
109
110
111
107
104
103
108
A
C
F
D
B
E
G
K
L
M
J
I
H
2-580-603-01
SCREW, +PSW M4X16
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
2-580-592-01
SCREW, +PSW M3X8
4-159-298-01
SCREW, +PSW M4X10
4-178-167-01
SCREW, ORNAMENTAL
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
101
4-165-765-01
COVER, BOTTOM (60)
102
4-185-199-01
COVER, TERMINAL
103
X-2548-052-1
REAR COVER (60) ASSEMBLY
[104]
104
4-165-761-02
REAR COVER (60 BTM)
105
4-165-760-01
REAR COVER (60 TOP)
106
4-168-432-11
COVER, UNDER (60)
! 107
1-842-104-31
AC INLET
108
4-176-944-01
BRACKET, VESA T (ML)
109
4-167-684-01
BRACKET, BUTTON (GS)
110
1-798-309-11
POWER SWITCH
111
1-487-835-11
KEY CONTROL MODULE
Click on the first or last page to see other KDL-46NX800 / KDL-52NX800 / KDL-60NX800 / KDL-60NX801 service manuals if exist.