Sony KDL-46CX525 Service Manual ▷ View online
KDL-46CX525
48
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
ACCESSORIES AND PACKING
3-299-071-05
FLYER, SAFETY
4-273-074-11
FLYER, SAFETY
4-273-010-32
MANUAL, INSTRUCTION
*
4-275-364-11
SUPPLEMENT(STAND INSTALLATION)
MISCELLANEOUS
X-2560-379-1
BAG, SCREW ASSEMBLY (L)
CONTAINS THE FOLLOWING 2 SCREWS
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-259-541-01
USER SCREW ST
(SCREWS TO ATTACH STAND HEAD AND STAND BASE TO NECK)
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
4-188-302-11
HEX WRENCH
4-257-907-01
JOINT, STAND
(SCREWS USED WHEN STAND IS ATTACHED-NOT USED WITH WALL MOUNTS)
4-100-136-01
SHEET (CORE), C
4-256-443-01
SHEET, RADIATION (BAT-L/V)
ORDER THIS PART WHEN REPLACING THE LCD PANEL.
4-260-776-02
SPACER (G B)
X-2549-230-1
SUPPORT BELT KIT
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
REMOTE COMMANDER
1-489-485-11
REMOTE COMMANDER (RM-YD064)
KDL-46CX525
49
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
WIRE DRESSING DIAGRAMS
FIGURE 6-1. KDL-46CX525 OVERALL WIRE DRESSING
KDL-46CX525 50
OVERVIEW
As mentioned in
“Section 2 - Software Requirements” on page 13
the models in this manual utilize a “generic” type main board, therefore
certain service adjustments settings must be confirmed when either
the Main Board, LCD Panel, or TCON Board are replaced.
UPDATING THE SOFTWARE
After replacing the Main Board, LCD Panel, or TCON Board, you
MUST UPDATE the SOFTWARE to the latest version. .
ACCESSING SERVICE ADJUSTMENTS
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons on
2. Access Service Mode by pressing the following buttons on
the Remote Commander within a second of each other:
DISPLAY
Channel 5
Volume +
POWER .
DISPLAY
RM-YD064
5
VOLUME+
POWER
SECTION 7 - SERVICE ADJUSTMENTS
KDL-46CX525 51
SECTION 7 - SERVICE ADJUSTMENTS
3. The
DIGITAL Service Menu displays.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and VPC. If the DIGITAL Service Menu is not
displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:1C117081
PM1.012W00LU
PID:0402000
PB1.000W00LU
PNL:LTY460HN0101
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
FIGURE 7-1. SAMPLE DIGITAL SERVICE MENU
press
or
JUMP
OPTIONS
CHASSIS
SERVICE
000
000
WYVERN
S2_NOISE_TH 32
FIGURE 7-2. SAMPLE CHASSIS SERVICE MENU
VIEWING OR CHANGING SERVICE DATA
Within each Service Menu are Categories and data information.
CHASSIS
SERVICE
000
000
WYVERN
S2_NOISE_TH 32
Data Value
Item Name
Category Number
Item Number
Category Name
FIGURE 7-3. SERVICE DATA DEFINITIONS
Use the buttons on the Remote Commander to review or change the
service data.
4. To change the Category, press 2 to move to the Next
Category or press 5 to go back to the Previous Category.
Note: Pressing 2 or 5 only changes the Categories within
the Service Menu displayed.
5. To change the adjustment item, press 1 to move to the
Next Item or 4 to go back to the Previous Item.
6. To change the Data Value, press 3 to increase the Data
Value or 6 to decrease the Data Value.
7. Press MUTING then press 0 to WRITE (Save) the
changes.
8. To exit service mode, press HOME or turn the TV power
off.
Click on the first or last page to see other KDL-46CX525 service manuals if exist.