DOWNLOAD Sony KDL-42W805B Service Manual ↓ Size: 5.27 MB | Pages: 28 in PDF or view online for FREE

KDL-42W805B 21

 

201 

1-848-110-11 

FFC WITH CONNECTOR 51P 

 

202 

1-910-804-03 

HARNESS ASSEMBLY 

 

203 

1-910-804-02 

CONNECTOR ASSEMBLY 30P 

202

201

203

202

KDL-42W805B 22

Wall Mount (2)

Table Top Stand to TV (4)

 

Main Board (6)

Rear Cover to Panel Bracket (6), Rear Cover to Smart Core (1), 
Rear Cover to Bracket Side (1), Rear Cover to Bracket Under (1), 
Smart Core to Panel Bracket (2)

 

 

SCREW, +PSW M4X10

SCREW, M4X11 LOCK

SCREW, +PSW M3X6 W12

SCREW (+PSW) (M3X6)

SCREW, +BVTP 4X12 TYPE2 IT-3

4-449-743-01

4-479-543-01

4-256-393-01

2-990-421-41

2-580-639-01

Tuner Board (4), Main Bracket to Back Chassis (6)

Stand Neck to Stand Pipe (4)

SCREW, +PSW M5X16

4-159-298-21

Wall Mount (2)

SCREW,+PSW M6X12

4-457-126-01

4-159-298-01

SCREW, +PSW M4X10 

Rear Cover to Panel (2)

NA

NA

KDL-42W805B 23

 

 

4-449-743-01 

SCREW, +PSW M5X16 LOCK

 

 

 

(SCREWS TO ATTACH TABLE TOP STAND TO LCD TV)  

  

 

For product protection and safety reasons, Sony strongly recommends 

 

 

 

that you use the screws provided with the TV.  

 

 

 

CAUTION: These screws cannot be used to secure the TV  

 

 

 

to the Wall Mount Brackets.

 

 

4-159-298-21  

SCREW, +PSW M4X10

 

 

 

(ATTACHMENT PARTS FOR WALL MOUNT BRACKETS)

 

 

4-457-126-01  

SCREW,+PSW M6X12

 

 

 

(ATTACHMENT PARTS FOR WALL MOUNT BRACKETS)

 

 

4-488-205-11 

MANUAL, INSTRUCTION 

 

 

 

4-485-844-01 

W/M VESA ADAPTER ASSEMBLY   

 

 

A-1992-461-A 

WALL MOUNT BKT ASSEMBLY  

 

 

 

4-262-708-04 

CLAMPER, CABLE 

 

 

4-474-176-01 

TAPE, ADHESIVE (0.024MM) WHITE

 

 

4-414-470-01 

SUPPORT BELT KIT

  

 

1-492-077-14 

ONE TOUCH REMOTE CONTROL (RMF-YD001)

 

 

1-492-758-11  

TOUCHPAD REMOTE CONTROL (RMF-YD003)

 

 

1-492-714-21 

REMOTE COMMANDER (RM-YD099)

KDL-42W805B A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED.