Sony KDL-40Z5500 / KDL-40Z5710 / KDL-46Z5500 / KDL-52Z5500 Service Manual ▷ View online
- 4 -
CAUTION
1. MDF-61 Connector (Removal)
Slide the slider to release slider
lock.
Press the centre lock tab to
release the lock and pull the
connector up
Remove connector
2. MDF-61 Connector (Refiitting)
Hold the centre of connector
Press centre of connector to insert
Slide the slider to lock connector
- 5 -
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more
than 45 degrees from the direction of
the connector base to avoid crossing
or twisting.
than 45 degrees from the direction of
the connector base to avoid crossing
or twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isola-
tion from lamp voltage.
be wider than 4mm to ensure isola-
tion from lamp voltage.
- 6 -
SPECIFICATIONS
System
Panel system
LCD (Liquid Crystal Display) Panel
TV system
Analogue: Depending on your country/area selection: B/G/H, D/K, L, I
Digital: DVB-T/DVB-C
Digital: DVB-T/DVB-C
Colour/video system
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Channel coverage
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
Sound output
10 W + 10 W
Input/Output jacks
Aerial/Antenna cable
75 ohm external terminal for VHF/UHF
/
AV1
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video
output.
output.
/
/
AV2
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and selectable
audio/video output.
audio/video output.
COMPONENT IN
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/P
B
/C
B
: 0.7 Vp-p, 75 ohms/
P
R
/C
R
: 0.7 Vp-p, 75 ohms
COMPONENT IN
Audio input (phono jacks)
HDMI IN1, 2, 3, 4
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN1 only)
PC Input (Page 7)
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN1 only)
PC Input (Page 7)
AV3
Video input (phono jack)
AV3
Audio input (phono jacks)
DIGITAL AUDIO
OUT (OPTICAL)
Digital optical jack (Two channel linear PCM, Dolby Digital)
Audio output (phono jacks)
PC IN
PC Input (D-sub 15-pin) (Page 7)
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
PC audio input (minijack)
USB port
i
Headphones jack
CAM (Conditional Access Module) slot
LAN
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection
speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not
guaranteed for this TV.)
speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not
guaranteed for this TV.)
- -
*Specified standby power is reached after the TV finishes necessary internal processes.
Design and specifications are subject to change without notice.
Model name
KDL-52Z5500
KDL-46Z5500
KDL-40Z5500
KDL-40Z5710
Power and others
Power requirements
220 V – 240 V AC, 50 Hz
Screen size (measured
diagonally)
diagonally)
52 inches/
Approx. 132.2 cm
Approx. 132.2 cm
46 inches/
Approx. 116.8 cm
Approx. 116.8 cm
40 inches/Approx. 101.6 cm
Display resolution
1,920 dots (horizontal) × 1,080 lines (vertical)
Power
consumption
consumption
in “Home”/
“Standard”
mode
“Standard”
mode
194 W
166 W
154 W
in “Shop”/
“Vivid”
mode
“Vivid”
mode
330 W
241 W
210 W
Standby power
consumption*
consumption*
0.19 W (16.5 W when “Quick Start” is set to “On”)
Model
name
name
KDL-52Z5500
KDL-46Z5500
KDL-40Z5500
KDL-40Z5710
Dimensions (Approx.) (w × h × d)
with
Table-
Top
Stand
Table-
Top
Stand
124.0 × 82.1 × 35.8 cm
109.1 × 72.5 × 33.0 cm
95.8 × 64.9 × 30.3 cm
95.8 × 64.9 × 30.2 cm
without
Table-
Top
Stand
Table-
Top
Stand
124.0 × 76.7 × 8.6 cm
109.1 × 67.2 × 8.6 cm
95.8 × 59.6 × 8.6 cm
Mass (Approx.)
with
Table-
Top
Stand
Table-
Top
Stand
31.3 kg
25.3 kg
20.8 kg
without
Table-
Top
Stand
Table-
Top
Stand
27.2 kg
21.9 kg
17.9 kg
PC input signal reference chart for
PC and HDMI IN 1, 2, 3, 4
* 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This
affects the “Video Settings” menu and “Screen” menu settings.
To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”.
To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”.
~
• This TV’s PC input does not support Sync on Green or Composite Sync.
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
• This TV’s PC input does not support interlaced signals.
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical
frequency (boldfaced).
Resolution
Horizontal
frequency (kHz)
frequency (kHz)
Vertical
frequency (Hz)
frequency (Hz)
Standard
Signals
Horizontal
(Pixel)
(Pixel)
× Vertical
(Line)
VGA
640
×
480
31.5
60
VESA
640
×
480
37.5
75
VESA
720
×
400
31.5
70
VESA
SVGA
800
×
600
37.9
60
VESA
800
×
600
46.9
75
VESA
XGA
1024
×
768
48.4
60
VESA
1024
×
768
56.5
70
VESA
1024
×
768
60.0
75
VESA
WXGA
1280
×
720
45.0
60
EIA
1280
×
768
47.4
60
VESA
1280
×
768
47.8
60
VESA
1280
×
960
60.0
60
VESA
1360
×
768
47.7
60
VESA
SXGA
1280
×
1024
64.0
60
VESA
HDTV
1920
×
1080
66.6
60
VESA*
1920
×
1080
67.5
60
EIA*
Click on the first or last page to see other KDL-40Z5500 / KDL-40Z5710 / KDL-46Z5500 / KDL-52Z5500 service manuals if exist.