Sony KDL-40W605B / KDL-48W605B Service Manual ▷ View online
KDL-40W605B/48W605B 21
NOTE: The components identified by shading and
!
mark are critical for safety.
Replace only with part number specified.
NOTE: The components identified by a red outline and a mark contain confidential
information. Specific instructions must be adhered to whenever these components are
repaired and/or replaced. (See Appendix A)
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
CONNECTORS
201
202
203
201
1-910-804-48
CONNECTOR ASSEMBLY 20P
202
1-848-217-11
(LVDS) FLEXIBLE FLAT CABLE 51P
(KDL-40W605B ONLY)
202
1-848-218-11
(LVDS) FLEXIBLE FLAT CABLE 51P
(KDL-48W605B ONLY)
203
1-910-804-49
HARNESS ASSEMBLY
(KDL-40W605B ONLY)
203
1-910-804-52
HARNESS ASSEMBLY
(KDL-48W605B ONLY)
REF. NO.
PART NO.
DESCRIPTION
KDL-40W605B/48W605B 22
NOTE: The components identified by shading and
!
mark are critical for safety.
Replace only with part number specified.
NOTE: The components identified by a red outline and a mark contain confidential
information. Specific instructions must be adhered to whenever these components are
repaired and/or replaced. (See Appendix A)
SECTION 4 - EXPLODED VIEW/PART NUMBER INFORMATION
SCREWS
SCREW, +PSW M4X10
SCREW, +PSW M3X6 W12
SCREW (+PSW) (M3X6)
SCREW, +BVTP 4X12 TYPE2 IT-3
4-256-393-01
2-990-421-41
2-580-639-01
P/N
DESCRIPTION
KDL-40W605B
4-159-298-21
NA
Bracket Under to Lower Cover (1)
SCREW, +PSW M5X20
3-452-815-21
Stand to TV (2)
Brackets Vesa (2) , Stand Brackets (2)
Main Board (6), LD Board (4)
Tuner Board (4)
SCREW, +BVTP 3X10 TYPE IT-3
7-685-647-79
Lower Cover (6), OP Cover a Bezel (3),
Stand Brackets (2), Main Board Plate (5)
Stand Brackets (2), Main Board Plate (5)
KDL-48W605B
Stand to TV (2)
Main Board (6), LD Board (4)
Tuner Board (4)
Wireless Lan Card (2), Lower Cover (7),
OP Cover a Bezel (2), Stand Brackets (2),
Main Board Plate (5)
OP Cover a Bezel (2), Stand Brackets (2),
Main Board Plate (5)
NA
SCREW, +PSW M6X16
7-685-611-01
Wall Mount Adapter (3)
Metal Bridge Right (2), Metal Bridge Left (2)
Bracket Side to Lower Cover (1)
Bracket Under to Lower Cover (1)
Bracket Side to Lower Cover (1)
Bracket Side to Lower Cover (1)
Brackets Vesa (2) , Stand Brackets (2)
NA
Wall Mount Adapter (3)
KDL-40W605B/48W605B 23
ACCESSORIES AND PACKAGING
3-452-815-21
SCREW, +PSW M5X20
(SCREWS TO ATTACH TABLE TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV.
CAUTION: These screws cannot be used to secure the TV
to the Wall Mount Brackets.
4-535-392-01
SCREW, +PSW M6X16
(ATTACHMENT PARTS FOR WALL MOUNT BRACKETS)
A-2015-641-A
WALL HUNG BKT ASSEMBLY
4-484-526-01
BRACKET, VESA
4-489-869-11
MANUAL, INSTRUCTION
4-527-141-01
LABEL, INFORMATION
(KDL-48W605B ONLY)
4-527-141-11
LABEL, INFORMATION
(KDL-40W605B ONLY)
(FOR SERIAL No. 2,000,001-2,200,000)
4-527-141-21
LABEL, INFORMATION
(KDL-40W605B ONLY)
(FOR SERIAL No. 2,200,001-2,400,000)
4-428-537-01
CLAMPER, AC ADAPTER
MISCELLANEOUS
PART NO.
DESCRIPTION
4-428-537-01
CLAMPER, AC ADAPTER
4-474-176-01
TAPE, ADHESIVE (0.024MM) WHITE
4-256-454-02
SPACER (G A)
4-100-136-01
SHEET (CORE), C
OPTIONAL ACCESSORIES
PART NO.
DESCRIPTION
4-414-470-01
SUPPORT BELT KIT
REMOTE COMMANDER
PART NO.
DESCRIPTION
1-492-715-21
REMOTE COMMANDER (RM-YD101)
SECTION 5 - ACCESSORIES/PART NUMBER INFORMATION
PART NO.
DESCRIPTION
KDL-40W605B/48W605B A-1
Sony Corporation
Sony SSOA
TV Service Engineering
Service Publications Department
9-883-589-03
English
2014BJ74WEB-1
© 2014.2
is a trademark of Sony Electronics.
Reproduction in whole or part without written permission is prohibited. All rights reserved.
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided
in the applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
pursuant to the following:
in the applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
pursuant to the following:
1.
In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3. Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced
defective component MUST BE DESTROYED. Boards cannot be swapped.
5.
If a Circuit Board identified with a red outline and a in the service manual is deemed to be defective:
a.
a.
and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to
Sony.
Sony.
b.
and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.
6.
If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a in the service manual MUST BE DESTROYED.
