Sony KDL-40W580B / KDL-40W590B / KDL-40W600B / KDL-40W605B / KDL-40W607B / KDL-40W608B / KDL-48W580B / KDL-48W585B / KDL-48W590B / KDL-48W600B / KDL-48W605B / KDL-48W607B / KDL-48W608B / KDL-48WM15B / KDL-60W600B / KDL-60W605B / KDL-60W607B / KDL-60W608B / KDL Service Manual ▷ View online
RB2G
CHASSIS
W580B/W585B/W590B/W600B/W605B/W607B/W608B/WM15B
25
Troubleshooting
3-9. 3D-Glasses(Active) malfunction
*(2) BT Active 3D glasses doesn’t work
Replace to New Battery and try again.
(use CR2025 only.)
Check 3D-Glasses
Battery voltage is
>2.8V?
Battery voltage is
>2.8V?
<2.8V
Restart TV. Power-off 3D-Glasses
and TRY registration again with
50cm distance.
and TRY registration again with
50cm distance.
Registered
Cannot Register
Interference from other
devices.
devices.
Check another 3D-Glasses and
re-register.
re-register.
NG
3D-Glasses NG.
OK
Check if 2.4GHz devices are used or not?(ex.
WiFi, other bluetooth devices, microwave,
cordless phone,....)
WiFi, other bluetooth devices, microwave,
cordless phone,....)
Change to another
environment and try
registration again.
environment and try
registration again.
NG
OK
Very strong interference on that spot.
Confirm BT (Bluetooth) malfunction
trouble shooting flow.
RB2G
CHASSIS
W580B/W585B/W590B/W600B/W605B/W607B/W608B/WM15B
26
Troubleshooting
3-10. Wireless Network malfunction
1) Internal Wireless Network malfunction
Wireless Network
on the TV
Is the radio field
Strength too weak
or even No
signal?
Access Point
BAXL Board
Error Message appear
when the Wireless
Network is selected?
Hardware defect
suspected.
Go to the next
No
Yes
No
Yes
*1
Change WiFi
module
NG
OK
WiFi module
From *1
OK
Check harness
connection is OK
between WiFi and BAXL
connection is OK
between WiFi and BAXL
Loose harness
NG
OK
Connect properly
Change
Wi-Fi module
Wi-Fi module
NG
NG
Change
BAXL board
Wi-Fi module
OK
If Wi-Fi malfunction happens,
•
Wi-Fi module
•
Harness between WiFi and BAXL
•
BAXL board are suspected.
NG
Change harness
between BAXL
board and WiFi
between BAXL
board and WiFi
Main Harness
OK
RB2G
CHASSIS
W580B/W585B/W590B/W600B/W605B/W607B/W608B/WM15B
27
Troubleshooting
3-11.Bluetooth malfunction
Touch pad Remote doesn’t work
Or
One touch remote doesn’t work
Or
3D-glasses (Active) doesn’t work
Confirm
Touch pad Remote malfunction trouble shooting flow
Or
One touch remote doesn’t work
Or
*(2) 3D-glasses (Active) malfunction trouble shooting flow
BT version check
in Service Menu
in Service Menu
Ver info.
can be read
can be read
OK
Check harness
connection is OK
between BT and BAXL
connection is OK
between BT and BAXL
Loose harness
NG
OK
Connect properly
Ver = --------
Change BT module
NG
Change BAXL board
BT module
OK
If Bluetooth malfunction happens,
•
BT module
•
Harness between BT module and BAXL
•
BAXL board are suspected.
NG
001 OP
000 VERS
<MAIN>
000 VERS
<MAIN>
<EXT>
DM0.001JPA
WF: 3.0.0.1021
WF0.300W00AA WF: --------
DF2.070W00AA FD: 0.003
YM0.619W00AA
DF2.070W00AA FD: 0.003
YM0.619W00AA
BT:
M4.922C
1.2.14.848
(DM0.0J00AA)
DD0.320W00AA
PK0.320W00AA EFR:-----------
AM0.030JP
MID: 04A3B50F
PID: 0F051040
PNL:
DQ3Y400LN0101
DD0.320W00AA
PK0.320W00AA EFR:-----------
AM0.030JP
MID: 04A3B50F
PID: 0F051040
PNL:
DQ3Y400LN0101
BT Version info.
Change harness
Between BAXL board
and BT
Between BAXL board
and BT
Main Harness
OK
NG
RB2G
CHASSIS
W580B/W585B/W590B/W600B/W605B/W607B/W608B/WM15B
28
SECTION 4
SERVICE ADJUSTMENTS
4-1. Accessing Service Mode
1) Go to TV standby condition by remote commander.
2) Press “i+ (info)”, “5”, “Volume +” then “TV power” on remote.
3) You can see Service Mode on display.
2) Press “i+ (info)”, “5”, “Volume +” then “TV power” on remote.
3) You can see Service Mode on display.
* The above operation should be finished within 15 seconds after the set go to STBY
mode
Remote Commander
Screen Sample
Remote Commander
(i+)
(5)
TV Power
1
2
3
4
4-2. Transition of Each Micro’s Service Mode
OPTIONS
1.
First of all, when you enter Service Mode, you can
see “Digital” service mode.
see “Digital” service mode.
2.
Whenever you press “OPTIONS” on remote, service
mode is changed according to the flow below:
mode is changed according to the flow below:
Part A “Chassis” & “VPC”
Part B “Digital” service mode
Digital” -> “Chassis” -> “VPC”
1. Change Data of “Chassis” or “VPC” service mode
a.
Press “2 / 5” on remote to select (up / down) category.
b.
Press “1 / 4” on remote to select (up / down) Item.
c.
Press “3 / 6” on remote to change (up / down) data.
4-3. Change Data by Service Mode 1 (Part A)
CHASSIS
SERVICE
000
WYVERN
000
S2_NOISE_TH 32
Press 2: increment
Press 5: decrement
Press 5: decrement
Press 1: increment
Press 4: decrement
Press 4: decrement
Press 3: increment
Press 6: decrement
Press 6: decrement
CHASSIS Service menu
a
b
c
Remote Commander
Save Changing Data by Service Mode 1
CHASSIS
WRITE
000
WYVERN
000
S2_NOISE_TH 32
CHASSIS Service menu
a
b
Remote Commander
2.
Write data for “Chassis” or “VPC” service mode.
a.
Press “Mute” on remote.
It shows green “SERVICE” changes to green
“WRITE”.
“WRITE”.
b.
Press “0” on remote. Green “WRITE” changes to
red “WRITE”. It indicate writing is processing.
red “WRITE”. It indicate writing is processing.
c.
After a while, red “WRITE” changes to green
“SERVICE”. Writing process is done at this point.
“SERVICE”. Writing process is done at this point.
3.
TV reboot is necessary for applying data change.
DIGITAL SERVICE
001 OP
000 VERS ---
<MAIN> <EXT>
DM0.270EUA WF:3.5.3.9999
WF0.190W00AA WF:--------
DF5.091W00AA FD:-.---
YM1.212W00AA BT:
M5.426C
001 OP
000 VERS ---
<MAIN> <EXT>
DM0.270EUA WF:3.5.3.9999
WF0.190W00AA WF:--------
DF5.091W00AA FD:-.---
YM1.212W00AA BT:
M5.426C
2.1.14.413
(DM0.270EUA)
DD0.181W00AA EFR:-----------
PK0.181W00AA
AM0.270WW
MID:2A11A30E
PID:0E048040
PNL:
LC550EUF-FGF1-00
DD0.181W00AA EFR:-----------
PK0.181W00AA
AM0.270WW
MID:2A11A30E
PID:0E048040
PNL:
LC550EUF-FGF1-00
Click on the first or last page to see other KDL-40W580B / KDL-40W590B / KDL-40W600B / KDL-40W605B / KDL-40W607B / KDL-40W608B / KDL-48W580B / KDL-48W585B / KDL-48W590B / KDL-48W600B / KDL-48W605B / KDL-48W607B / KDL-48W608B / KDL-48WM15B / KDL-60W600B / KDL-60W605B / KDL-60W607B / KDL-60W608B / KDL service manuals if exist.