Sony KDL-40V4000 / KDL-40V4210 / KDL-40V4220 / KDL-40V4230 / KDL-40V4240 / KDL-46V4000 / KDL-46V4210 / KDL-52V4000 / KDL-52V4210 Service Manual ▷ View online
- -
CAUTION
Due to changes in the caution note
for MDF-61 connector, the caution
note has been placed in Appendix-A
for MDF-61 connector, the caution
note has been placed in Appendix-A
- 5 -
SPECIFICATIONS
Projected Picture Size
LCD(Liquid Crystal Display) Panel
Approx 101.6cm (40 inches)
Approx 116.8cm (46 inches)
Approx 132.2cm (52 inches)
Approx 116.8cm (46 inches)
Approx 132.2cm (52 inches)
Sound Output
Right and Left speaker
2 x 10W (RMS)
Input/Output Terminals [REAR]
General Specifications
1: 21-pin Euro connector
(CENELEC standard)
Inputs for Audio and Video signals.
Inputs for RGB.
Inputs for RGB.
Outputs of TV Video and Audio
signals.
signals.
Power Requirements
220 - 240V
Power Consumption/
Standby
(40 inches):
Approx 175W/0.19W (Home/Standard mode)
Approx 197W/0.19W (Shop/Vivid mode)
Approx 197W/0.19W (Shop/Vivid mode)
(46 inches):
Approx 215W/0.19W (Home/Standard mode)
Approx 238W/0.19W (Shop/Vivid mode)
Approx 238W/0.19W (Shop/Vivid mode)
(52 inches):
Approx 222W/0.19W (Home/Standard mode)
Approx 249W/0.19W (Shop/Vivid mode)
Approx 249W/0.19W (Shop/Vivid mode)
2: 21-pin Euro connector
(CENELEC standard)
(CENELEC standard)
Inputs for Audio and Video signals.
Inputs for RGB and S Video.
Inputs for RGB and S Video.
Outputs of Video and Audio signals
(Selectable). SmartLink interface.
(Selectable). SmartLink interface.
Dimensions
(40 inches):
Approx 986x684x279mm (With stand)
Approx 986x646x110mm (Without stand)
Approx 986x646x110mm (Without stand)
(46 inches):
Approx 1120x782x307mm (With stand)
Approx 1120x742x115mm (Without stand)
Approx 1120x742x115mm (Without stand)
(52 inches):
Approx 1262x871x347mm (With stand)
Approx 1262x829x119mm (Without stand)
Approx 1262x829x119mm (Without stand)
Weight
Approx 21.5kg (40 inches with stand)
Approx 18.5kg (40 inches without stand)
Approx 29.0kg (46 inches with stand)
Approx 25.0kg (46 inches without stand)
Approx 38.0kg (52 inches with stand)
Approx 32.0kg (52 inches without stand)
Approx 18.5kg (40 inches without stand)
Approx 29.0kg (46 inches with stand)
Approx 25.0kg (46 inches without stand)
Approx 38.0kg (52 inches with stand)
Approx 32.0kg (52 inches without stand)
Component In
Supported formats: 1080p, 1080i,
720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative
sync/Pb/Cb: 0.7 Vp-p,
75 ohms/Pr/Cr: 0.7 V p-p, 75 ohms
Audio input: Phono jacks
720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative
sync/Pb/Cb: 0.7 Vp-p,
75 ohms/Pr/Cr: 0.7 V p-p, 75 ohms
Audio input: Phono jacks
Supplied Accessories
RM-ED013 Remote Commander (1)
IEC designated R06 battery (2)
Mains lead (Type BF) (1)
IEC designated R06 battery (2)
Mains lead (Type BF) (1)
Stand (1) and screws (4)
HDMI Inputs
Video: 1080p24, 1080p, 1080i, 720p
576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48kHz,
16, 20 and 24 bits
Analogue audio input: Phono jacks
576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48kHz,
16, 20 and 24 bits
Analogue audio input: Phono jacks
(HDMI IN 2 only)
Other Features
High Picture Quality, FHD 1920x1080, Dynamic
Contrast,Intergrated digital TV Tuner DVB-T/C,
Contrast,Intergrated digital TV Tuner DVB-T/C,
Virtual Dolby Surround, BBE Viva, PC Input,
3 HDMI Inputs.
3 HDMI Inputs.
PC Input
Video:15 Pin D Sub Connector
Audio: Minijack
Audio: Minijack
Digital Out
Digital Optical Jack
Audio Output: Phono jacks
CAM
Conditional Access Module
Input/Output Terminals [SIDE]
Remote control system : Infrared control
Headphone jack
Stereo mini jack
Power requirements
3V dc
2 batteries IEC designation
2 batteries IEC designation
R06 (size AA)
Audio input
Phono jacks
Video input
Phono jack
HDMI input
HDMI Connector
Design and specifications are subject to change without notice.
Television System
Channel Coverage
Colour/Video System
Analogue:
Depending on your country/region
B/G/H, D/K, L, I
Depending on your country/region
B/G/H, D/K, L, I
Digital:
DVB-T/DVB-C
DVB-T/DVB-C
Analogue: VHF : E2-E12
UHF : E21-E69
CATV : S1-S20
HYPER : S21-S41
D/K: R1-R12, R21-R69
L: F2-F10, B-Q, F21-F69
I: UHF B21-B69
Digital: VHF/UHF
UHF : E21-E69
CATV : S1-S20
HYPER : S21-S41
D/K: R1-R12, R21-R69
L: F2-F10, B-Q, F21-F69
I: UHF B21-B69
Digital: VHF/UHF
Analogue:
PAL, SECAM
NTSC 3.58/4.43
(VIDEO IN)
PAL, SECAM
NTSC 3.58/4.43
(VIDEO IN)
Digital:
MPEG-2 MP@ML/HL
MPEG-2 MP@ML/HL
- 6 -
CONNECTORS
21 Pin Connector (SCART)
_
_
Red input
0.7 +/- 3dB, 75 ohms, positive
_
(S signal Chroma
Connected
Not Connected (open) * at 20Hz - 20kHz
Pin No
1
2
Signal
Signal level
1
Audio output B
(right)
(right)
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Output impedence : Less than 1kohm*
2
Audio input B
(right)
(right)
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Output impedence : More than 10kohm*
3
Audio output A
(left)
(left)
Standard level : 0.5V rms
Output impedence : Less than 1kohm*
Output impedence : Less than 1kohm*
4
Ground (audio)
5
Ground (blue)
6
Audio input A
(left)
(left)
Standard level : 0.5V rms
Output impedence : More than 10kohm*
Output impedence : More than 10kohm*
7
Blue input
0.7 +/- 3dB, 75 ohms positive
8
Function select
(AV control)
(AV control)
High state (9.5-12V) : Part mode
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
Low state (0-2V) : TV mode
Input impedence : More than 10K ohms
Input capacitance : Less than 2nF
9
Ground (green)
10
AVlink
11
Green
Green signal : 0.7 +/- 3dB, 75 ohms,
positive
positive
12
Open
13
Ground (red)
14
Ground (blanking)
15
input)
0.3 +/- 3dB, 75 ohms, positive
16
Blanking input
(Ys signal)
(Ys signal)
High state (1-3V) Low state (0-0.4V)
Input impedence : 75 ohms
Input impedence : 75 ohms
17
Ground (video
output)
output)
18
Ground (video
input)
input)
19
Video output
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
20
Video input
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
Video input
Y (S signal)
1V +/- 3dB, 75ohms, positive sync 0.3V
(-3+10dB)
(-3+10dB)
21
Common ground
(plug, shield)
(plug, shield)
- -
- -
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
21
How to replace the fuse.
Open the fuse compartment with
a screwdriver blade and replace
the fuse.
Open the fuse compartment with
a screwdriver blade and replace
the fuse.
FUSE
WARNING (UK Models only)
The flexible mains lead is supplied connected to a B.S. 1363 fused
plug having a fuse of the correct rating for the set. Should the fuse
need to be replaced, use a fuse of the same rating approved by ASTA
to BS 1362, ie one that carries the
plug having a fuse of the correct rating for the set. Should the fuse
need to be replaced, use a fuse of the same rating approved by ASTA
to BS 1362, ie one that carries the
ASA
T
mark.
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT SUITABLE
FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT
OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED
FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH
BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE SOCKET.
FOR THE OUTLET SOCKETS IN YOUR HOME, IT SHOULD BE CUT
OFF AND AN APPROPRIATE PLUG FITTED. THE PLUG SEVERED
FROM THE MAINS LEAD MUST BE DESTROYED AS A PLUG WITH
BARED WIRES IS DANGEROUS IF ENGAGED IN A LIVE SOCKET.
When an alternative type of plug is used, it should be fitted with the
correct rating fuse, otherwise the circuit should be protected by the
same rating fuse at the distribution board.
correct rating fuse, otherwise the circuit should be protected by the
same rating fuse at the distribution board.
UK PLUG WARNING
- 7 -
HDMI Connector
Rear Connection Panel
Side Connection Panel
15 Pin D Sub Connector (PC)
1
Pin No
Signal Assignment
Pin No
Signal Assignment
1
TMDS Data2+
11
TMDS Clock Shield
2
TMDS Data2 Shield
12
TMDS Clock-
3
TMDS Data2-
13
CEC
4
TMDS Data1+
14
Reserved (N.C. on device)
5
TMDS Data1 Shield
15
SCL
6
TMDS Data1-
16
SDA
7
TMDS Data0+
17
DDC/CEC Ground
8
TMDS Data0 Shield
18
+5V Power
9
TMDS Data0-
19
Hot Plug Detect
10
TMDS Clock+
Pin No
Signal Assignment
Pin No
Signal Assignment
1
Red Out
9
+5V DC
2
Green Out
10
Sync Return (Ground)
3
Blue Out
11
Monitor ID0 in Display
4
Unused
12
DCC Serial Data
5
Ground
13
Horizontal Sync
6
Red Return
14
Vertical Sync
7
Green Return (Ground)
15
DCC Serial Clock
8
Blue Return (Ground)
Click on the first or last page to see other KDL-40V4000 / KDL-40V4210 / KDL-40V4220 / KDL-40V4230 / KDL-40V4240 / KDL-46V4000 / KDL-46V4210 / KDL-52V4000 / KDL-52V4210 service manuals if exist.