Sony KDL-40U4000 Service Manual ▷ View online
REF.NO.
PART.NO
DESCRIPTION
REMARK
REF.NO.
PART.NO
DESCRIPTION
REMARK
- 56 -
HM4
ACCESSORIES AND CONNECTORS
*1-835-147-11 CONNECTOR ASSY, MDF61 (CN6700(IP5)-BALANCER)
*1-910-046-43 CONNECTOR ASSY 13P (CN6401(BE2)-CN6150(IP5))
*1-910-046-44 CONNECTOR ASSY 6P (CN6402(BE2)-CN6154(IP5))
*1-910-046-45 CONNECTOR ASSY 7P (CN6701(IP5)-BALANCER)
*1-910-046-46 SP CONNECTOR ASSY 4P (CN3400(BE2)-SPEAKER)
*1-910-046-48 CONNECTOR ASSY H3 20P (CN5500(BE2)-
CN101(SWITCH UNIT)/CN301(HM4))
1-966-133-11 LEAD WIRE WITH CONNECTOR (LVDS) (TCON-
CN8000(BE2))
*3-298-969-11 INSTRUCTION MANUAL (UK) ENGLISH
*3-298-969-21 INSTRUCTION MANUAL (WE) GERMAN/SPANISH/
FRENCH/GREEK/ITALIAN/DUTCH/PORTUGUESE
*3-298-969-31 INSTRUCTION MANUAL (OIRT) DANISH/FINNISH/
ENGLISH/NORWEGIAN/POLISH/RUSSIAN/SWEDISH
*3-298-969-41 INSTRUCTION MANUAL (OIRT) CZECH/HUNGARIAN/
SLOVAK/TURKISH
REMOTE COMMANDER
1-480-798-11 REMOTE COMMANDER (RM-ED013)
< RESISTOR >
R301
1-216-821-11
METAL CHIP 1K 5% 1/10W
R302
1-216-821-11
METAL CHIP 1K 5% 1/10W
R303
1-216-821-11
METAL CHIP 1K 5% 1/10W
R304
1-216-821-11
METAL CHIP 1K 5% 1/10W
R305
1-216-825-11
METAL CHIP 2.2K 5% 1/10W
R311
1-216-817-11
METAL CHIP 470 5% 1/10W
R312
1-216-805-11
METAL CHIP 47 5% 1/10W
9-883-401-03
Sony Corporation
Sony UK
Service Promotions Dept.
English
09DP7100-1
Printed in U.K.
© 2009.04
Appendix-A - Caution Notes
1. MDF-61 Connector (Removal)
Slide the slider to release slider
lock.
Press the centre lock tab to
release the lock and pull the
connector up
Remove connector
2. MDF-61 Connector (Refiitting)
Hold the centre of connector
Press centre of connector to insert
Slide the slider to lock connector
VER 3.0
Appendix-A - Caution Notes
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more than
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isolation
from lamp voltage.
be wider than 4mm to ensure isolation
from lamp voltage.