Sony KDL-40NX725 / KDL-46NX725 Service Manual ▷ View online
KDL-40NX725/46NX725
47
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
251
4-278-451-01
CENTER CABINET(40 SIR)
(KDL-40NX725 ONLY)
251
4-263-623-01
CENTER CABINET (46 SIR)
(KDL-46NX725 ONLY)
252
A-1792-918-A
HLT2 BOARD, MOUNTED
253
NA
LCD PANEL ASSEMBLY (P-MOD)
FOR ALL LCD PANEL AND TCON BOARD PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
4-256-393-01
SCREW, +PSW M3X6 W12
251
253
252
PWB (H)
Tape
A
B
PWB (H)
Tape
CENTER CABINET, HLT2 BOARD AND LCD PANEL REMOVAL
CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
CAUTION:
When replacing the LCD Panel Assembly refer to
“Special Handling Instructions
When Replacing the LCD Panel Assembly” on page 4.
The HLT2 Board is attached to the LCD
Panel with PWB (H) Tape. Do NOT
damage the HLT2 Board when removing
from the LCD Panel.
A Remove screws from Center Cabinet to
detach from LCD Panel
3 from KDL-40NX725 Only
7 from KDL-46NX725 Only
B Carefully lift-up HLT2 Board to detach
from LCD Panel
KDL-40NX725/46NX725
48
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
301
1-838-924-11
CONNECTOR ASSEMBLY
* 302
1-910-801-10
CONNECTOR ASSEMBLY 14P
303
1-910-801-11
CONNECTOR ASSEMBLY 28P
304
1-838-849-11
(LVDS) FLEXIBLE FLAT CABLE N1 40S
* 305
1-910-801-41
(LVDS) FLEXIBLE FLAT CABLE 56 PIN
306
1-910-801-59
HARNESS ASSEMBLY
SCREWS
CONNECTORS
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
4-256-393-01
SCREW, +PSW M3X6 W12
AC COVER(1), WOOFER(3), CNTR CBNT(3)
7
□
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
RC(4)
4
◆
4-257-907-01
JOINT, STAND
RC(2)
2
◇
4-268-126-02
SCREW, ORNAMENTAL M6X12
RC(6)
6
●
2-990-421-41
SCREW (+PSW) (M3X6)
BATL(6), G4BW(3), LD SHIELD(2), WIFI(1), ANTENNAS(2), CAMERA(1)
15
○
4-258-272-01
SCREW, +PWH M3X8
RC(8), SWITH UNIT(1)
9
★
7-685-646-79
SCREW +BVTP 3X8 TYPE2 IT-3
TERMINAL AREA(1), SIDEJACK AREA(1)
2
☆
4-259-541-01
USER SCREW ST
HEAD STAND to NECK(1), NECK to BASE STAND(2)
3
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
4-256-393-01
SCREW, +PSW M3X6 W12
AC COVER(1), WOOFER(3), CNTR CBNT(7)
11
□
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
RC(4)
4
◆
4-257-907-01
JOINT, STAND
RC(2)
2
◇
4-268-126-02
SCREW, ORNAMENTAL M6X12
RC(6)
6
●
2-990-421-41
SCREW (+PSW) (M3X6)
BATL(6), G5AW(3), WIFI(1), ANTENNAS(2), CAMERA(1)
13
○
4-258-272-01
SCREW, +PWH M3X8
RC(8), SWITH UNIT(1)
9
★
7-685-646-79
SCREW +BVTP 3X8 TYPE2 IT-3
TERMINAL AREA(2), SIDEJACK AREA(1)
3
☆
4-259-541-01
USER SCREW ST
HEAD STAND to NECK(1), NECK to BASE STAND(3)
4
KDL-40NX725
KDL-46NX725
KDL-46NX725 ONLY
351
1-838-924-11
CONNECTOR ASSEMBLY
352
1-910-801-18
CONNECTOR ASSEMBLY 14P
353
1-910-801-21
CONNECTOR ASSEMBLY 28P
354
1-838-848-11
(LVDS) FLEXIBLE FLAT CABLE N1 46S
355
1-910-801-69
HARNESS ASSEMBLY
301
302
303
304
306
305
351
352
353
355
354
KDL-40NX725 ONLY
KDL-40NX725/46NX725
49
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
ACCESSORIES AND PACKAGING
X-2560-379-1
BAG, SCREW ASSEMBLY (L)
(KDL-46NX725 ONLY)
X-2549-819-1
BAG, SCREW ASSEMBLY (M)
(KDL-40NX725 ONLY)
1-838-791-11
CABLE CONVERSION
3-299-071-05
FLYER, SAFETY
4-273-074-11
FLYER, SAFETY
4-188-302-11
HEX WRENCH
4-273-016-33
MANUAL, INSTRUCTION
*
4-270-904-11
SUPPLEMENT(STAND INSTALLATION)
MISCELLANEOUS
4-262-708-01
CLAMPER, CABLE
*
4-268-137-11
CUSHION, TERMINAL
*
4-277-411-11
GASKET (TU)
(KDL-40NX725 ONLY)
*
4-287-536-01
GASKET (TU)
(KDL-46NX725 ONLY)
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-256-443-01
SHEET, RADIATION (BAT-L/V)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-256-454-02
SPACER (G A)
4-260-776-02
SPACER (G B)
X-2549-230-1
SUPPORT BELT KIT
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
4-195-059-21
TAPE, PWB (H)
4-259-541-01
USER SCREW ST
(SCREWS TO ATTACH HEAD STAND AND BASE STAND TO NECK)
REMOTE COMMANDER
1-489-474-11
REMOTE COMMANDER (RM-YD062)
KDL-40NX725/46NX725
50
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
WIRE DRESSING
KDL-46NX725 ONLY
FIGURE 6-2. KDL-46NX725 OVERALL WIRE DRESSING
KDL-40NX725 ONLY
FIGURE 6-1. KDL-40NX725 OVERALL WIRE DRESSING
Click on the first or last page to see other KDL-40NX725 / KDL-46NX725 service manuals if exist.