Sharp MX-LCX6 (serv.man4) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
1.Model Name: MX-LCX6 (Optional accessories for MX-M850/M950/M1100)
2.Symptom:
When an oversized capacity paper feed tray has run out of paper, a paper feed
base is to be pulled up to its uppermost position.
If the paper feed base keeps staying at that position under the condition of low
temperature and low humidity, a wire often becomes hard that could cause the
paper feed base to be horizontally slanted when it descends.
In such an occasion, it is possible that the slack of the wire suspending the paper
feed base could cause interference with other parts.
3.Description: Arranged for the paper feed base not to slant when it descends, the balance
(paper feed weight plates) has been added onto the back side of the paper feed
base.
Please refer to another sheet for the mounting instruction of the paper feed weight
plates.
4.Action: From February 2008 production
COUNTERMEASURES FOR THE
PAPER TRAY NOT DESCENDING
STRAIGHT AND LEVEL
TECHNICAL BULLETIN
Date:
10
th
June 2008
Model:
MXM850/950/1100
Ref.:
001
Colour:
White
Page:
1 of 3
Sharp Electronics (UK) Ltd., Technical Services Group
5.Parts Action:
Current parts
New parts
Ref.
No.
Model
name
Version P/G No.
Parts code
Parts code
Price
rank
Parts name
Effective
time
Inter-
chang
e-
abilit
y
Numbe
r
7-28
LDAIU0684FCZZ LDAIU0684FCZ1 BE
Paper feed base
1
7-
--- LPLTM7614FCZZ
AV
Paper feed
weight plate
7-
--- LX-BZ0611FCPZ
Screw (4x8)
1
MX-LCX6
ALL
7-
--- XBBS730P08000
AA
Screw (3x8)
2008/2 5
2
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Sharp Electronics (UK) Ltd., Technical Services Group
The mounting instruction of the paper feed weight plates
1. Fit the two paper feed weight plates with each other, then fasten them by a screw in
a screw hole.
2. Fit the combined paper feed weight plates on the back side of the paper feed base as
shown in picture below.
3. Secure the combined paper feed weight plates on the side of the paper feed base by
screws in the two screw holes.
4. Secure the combined paper feed weight plates by a screw from the front side of the
paper feed base through the screw hole added.
Display