Sony KDL-40NX710 / KDL-40NX711 / KDL-46NX710 / KDL-46NX711 Service Manual ▷ View online
KDL-40NX710/40NX711/46NX710/46NX711
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-3. G9A/G9B (POWER) BOARDS, BUHT BOARD, HLT BOARD AND
WIRELESS LAN CARD REMOVAL
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
107
A-1788-127-A
BUHT BOARD, COMPLETE
NOTE: For BUHT Board replacement, please refer to section
2-2. Adjustments after Replacing the BUHT Board or LCD Panel Assembly.
NOTE: Final software is not installed on this BUHT Board.
Install the update after replacing this board using the instructions
provided with the software.
108
4-188-665-11
BRACKET, SIDE JACK
109
4-188-666-11
BRACKET, TERMINAL
110
1-474-256-11
G9A (POWER) BOARD, COMPLETE
(KDL-40NX710/40NX711 ONLY)
110
1-474-257-11
G9B (POWER) BOARD, COMPLETE
(KDL-46NX710/46NX711 ONLY)
111
4-188-690-01
SHEET, INSULATION (G)
2-990-421-41
SCREW (+PSW) (M3X6)
101
NA
T-MOD (LCD PANEL ASSEMBLY)
FOR ALL T-MOD (LCD PANEL ASSEMBLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
102
4-199-303-01
LABEL, TERMINAL (FOR CND/MX/LAA)
(KDL-40NX710/46NX710 ONLY)
102
4-199-302-01
LABEL, TERMINAL (FOR US)
(KDL-40NX711/46NX711 ONLY)
103
4-199-284-01
LABEL, SIDE JACK (S)
(KDL-40NX710/40NX711 ONLY)
103
4-199-290-01
LABEL, SIDE JACK (L)
(KDL-46NX710/46NX711 ONLY)
104
1-487-819-11
CARD, WIRELESS LAN
105
A-1782-538-A
HLT(STD) BOARD, MOUNTED
106
4-195-059-01
TAPE, PWB (H)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
107
106
105
108
109
111
110
104
103
102
101
CAUTION: Refer to
”Special Handling Instructions When Replacing the LCD Panel Assembly” on page 6.
Note: The Tape PWB (H), Side Jack Label, Terminal Label,
Insulation Sheet (G) and Attachment GL pieces are not included
with the LCD Panel Assembly and must be replaced
when replacing the LCD Panel Assembly.
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
D
C
B
E
F
H
I
G
A
THE TERMINAL LABEL
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
THE SIDE JACK LABEL
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
A Remove 2 screws from Wireless
LAN Card to detach from LCD
Panel Assembly
B Gently peel-off HLT Board
and Disconnect 1 connector
to detach from LCD Panel
Assembly
C Gently peel-off Tape PWB (H) to
detach from HLT Board
D Remove 9 screws from BUHT
Board to detach from LCD Panel
Assembly
E Release 2 clips to detach Side
Jack Bracket from BUHT Board
F Release 2 clips to detach
Terminal Bracket from BUHT
Board
G Remove 3 screws from G9B
(Power) Board to detach from
LCD Panel Assembly
H Gently peel-off Insulation Sheet
(G) to detach from LCD Panel
Assembly
I Slide-out 2 Attachment GL
pieces to detach from LCD Panel
Assembly
KDL-40NX710/40NX711/46NX710/46NX711
17
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-4. CLEANING THE LCD PANEL ASSEMBLY
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
®
Wipe the LCD screen gently with a soft cloth.
®
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm
water.
®
If using a chemically pretreated cloth, please follow the instruction provided on the package.
®
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
®
Periodic vacuuming of the ventilation openings is recommended to ensure the proper ventilation.
1-5. SCREW LEGEND
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
CN6150
CN6151
CN8500
CN6003
G9A/G9B
CN6002
CN2602
CN2600
CN5500
CN3800
CN4300
BUHT
SP
SP
HLT
WIFI
ILLUMINATION
MODULE
SWITCH UNIT
POWER SWITCH
TCON
SP
151
154
153
152
157
156
155
1-6. CONNECTORS
* 151
1-838-406-11
CONNECTOR ASSEMBLY
(KDL-40NX710/40NX711 ONLY)
151
1-838-371-11
CONNECTOR ASSEMBLY
(KDL-46NX710/46NX711 ONLY)
* 152
1-910-101-73
CONNECTOR ASSEMBLY 14P
(KDL-40NX710/40NX711 ONLY)
152
1-910-101-78
CONNECTOR ASSEMBLY 14P
(KDL-46NX710/46NX711 ONLY)
* 153
1-910-101-71
CONNECTOR ASSEMBLY 12P
(KDL-40NX710/40NX711 ONLY)
153
1-910-101-75
CONNECTOR ASSEMBLY 12P
(KDL-46NX710/46NX711 ONLY)
* 154
1-910-060-21
CONNECTOR ASSEMBLY 6P
* 155
1-910-101-70
HARNESS ASSEMBLY
(KDL-40NX710/40NX711 ONLY)
155
1-910-101-74
HARNESS ASSEMBLY
(KDL-46NX710/46NX711 ONLY)
* 156
1-910-101-72
CONNECTOR ASSEMBLY 8P
(KDL-40NX710/40NX711 ONLY)
* 156
1-910-101-77
CONNECTOR ASSEMBLY 8P
(KDL-46NX710/46NX711 ONLY)
* 157
1-838-265-11
(LVDS) FLEXIBLE FLAT CABLE 51P
(KDL-40NX710/40NX711 ONLY)
* 157
1-838-266-11
(LVDS) FLEXIBLE FLAT CABLE 51P
(KDL-46NX710/46NX711 ONLY)
P/N
DESCRIPTION
REMARKS
TOTAL
■
4-167-019-11
SCREW, +PSW M3X8
RC(9), AC CVR(1), WOOFER to PNL(3)
13
□
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(2), BTM FRM to PNL(2)
4
▽
3-452-815-01
SCREW, +PSW M5X20
TABLE-TOP STAND(3)
3
●
2-990-421-41
SCREW (+PSW) (M3X6)
BUHT(9), G9A(3), WIFI(2), ANTENNAS(2), BEZ BTM(3)
19
P/N
DESCRIPTION
REMARKS
TOTAL
■
4-167-019-11
SCREW, +PSW M3X8
RC(11), AC CVR(1), WOOFER to PNL(3)
15
□
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(2), BTM FRM to PNL(2)
4
▽
3-452-815-01
SCREW, +PSW M5X20
TABLE-TOP STAND(3)
3
●
2-990-421-41
SCREW (+PSW) (M3X6)
BUHT(9), G9B(3), WIFI(2), ANTENNAS(2), BEZ BTM(3)
19
KDL-40NX710/40NX711
KDL-46NX710/46NX711
(Check the
Sony Electronics Service Information
website for any additional service related issues for this model.)
KDL-40NX710/40NX711/46NX710/46NX711
18
DISASSEMBLY/PART NUMBER INFORMATION
1-7. ACCESSORIES AND PACKING
3-299-071-04
FLYER, SAFETY
4-178-676-41
MANUAL, INSTRUCTION (ENGLISH VERSION)
4-178-676-51
MANUAL, INSTRUCTION (FRENCH VERSION)
(KDL-40NX710/46NX710 ONLY)
4-178-676-61
MANUAL, INSTRUCTION (SPANISH VERSION)
(KDL-40NX710/46NX710 ONLY)
4-180-471-51
MANUAL, INSTRUCTION
(KDL-40NX710/40NX711/46NX711 ONLY)
4-198-235-51
MANUAL, INSTRUCTION
(KDL-40NX710/40NX711/46NX711 ONLY)
!
1-838-333-11
POWER-SUPPLY CORD (WITH CONN.)
*
4-208-536-21
SUPPLEMENT(STAND INSTALLATION)
1-8. OPTIONAL ACCESSORIES
1-458-251-11
3D GLASSES
1-458-253-11
3D SYNC TRANSMITTER UNIT
1-9. MISCELLANEOUS
X-2548-309-2
BAG, SCREW ASSY (D)
(KDL-40NX710/40NX711 ONLY)
X-2548-310-1
BAG,SCREW ASSEMBLY (E)
(KDL-46NX710/46NX711 ONLY)
4-261-922-01
FLYER, BIV
(KDL-40NX711/46NX711 ONLY)
*
4-259-974-01
POST, PWB MINI
4-100-136-01
SHEET (CORE), C
*
4-188-689-01
SHEET, THERMAL (B2)
*
4-259-997-01
SHEET, THERMAL B SMALL
7-600-031-96
TAPE (3M 1350FW-1)15MMX66M WHT
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
X-2549-230-1
SUPPORT BELT KIT
1-10. REMOTE COMMANDER
1-487-820-12
REMOTE COMMANDER (RM-YD051) (FOR CND/MX/LAA ONLY)
(KDL-40NX710/46NX710 ONLY)
1-487-710-12
REMOTE COMMANDER (RM-YD036) (FOR US ONLY)
(KDL-40NX711/46NX711 ONLY)
KDL-40NX710/40NX711/46NX710/46NX711
19
DISASSEMBLY/PART NUMBER INFORMATION
1-11. WIRE DRESSING DIAGRAMS
1-11-1. KDL-40NX710/40NX711 ONLY
Click on the first or last page to see other KDL-40NX710 / KDL-40NX711 / KDL-46NX710 / KDL-46NX711 service manuals if exist.