Sony KDL-40HX800 / KDL-46HX800 / KDL-55HX800 Service Manual ▷ View online
KDL-40HX800/46HX800/55HX800
28
SERVICE ADJUSTMENTS
21. For the
DATA_TRANS_SET item, press
3
to increase the
data value to 1.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_SET
1
Data Value
22. Press
1
until the
001 DATA_TRANS_EXE item displays.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_EXE
0
23. For the
DATA_TRANS_EXE item, press
3
to increase the
data value to 1 to execute the update.
NOTE: A warning message indicating the TV cannot be
turned off displays.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_EXE
1
Data Value
DO NOT POWER OFF
Warning
Message
Displays
Message
Displays
After the update is complete, the data value changes back to
0 and a message indicating the data transter was successful
displays.
24. Proceed to “Verifying the Emitter Output Level”.
2-2-5. VERIFYING THE EMITTER OUTPUT LEVEL
If necessary, the emitter LED output level can be increased or decreased.
25. Press
2
until the
009 3D category displays.
PEM
SERVICE
009
000
EMIT_STR
3D
0
Default
Data Value
Data Value
KDL-40HX800/46HX800/55HX800
29
SERVICE ADJUSTMENTS
26. Using the table below, press
3
to increase or press
6
to
decrease the data value.
DATA VALUE
SETTING
0
Strong (Default)
1
Weak
27. Press
MUTING then press
0
to WRITE (Save) the changes.
28. Exit Service Mode by turing the TV Power Off.
29. Proceed to “Verifying the Model and Panel Information”.
2-2-6. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID
PID
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
Model ID
Product ID
Panel
Code
Code
655731A7
0C3A0000
LTY(Z)400HL02
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name
Model ID Product ID
Panel ID
Code
Name
KDL-40HX800
655731a7
0c3a0000
LTY(Z)400HL02
2b-1.5
KDL-40HX800
655731a7
403a0000
LTY(Z)400HL02
2b-1.5
KDL-40HX800
655731be
0c3a0000
LTY[Z]400HL02
2b-1.5
KDL-40HX800
655731be
403a0000
LTY[Z]400HL02
2b-1.5
KDL-46HX800
655731a8
0c3a0000
LTY(Z)460HQ03
2b-1.5
KDL-46HX800
655731a8
403a0000
LTY(Z)460HQ03
2b-1.5
KDL-46HX800
655731bf
0c3a0000
LTY[Z]460HQ03
2b-1.5
KDL-46HX800
655731bf
403a0000
LTY[Z]460HQ03
2b-1.5
KDL-55HX800
655731a9
0c3a0000
LTY(Z)550HQ02
2b-1.5
KDL-55HX800
655731c0
0c3a0000
LTY[Z]550HQ02
2b-1.5
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
KDL-40HX800/46HX800/55HX800
30
SERVICE ADJUSTMENTS
2-2-7. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
2-3. RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments
and Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander,
press the POWER button on the TV Switch Unit of the set.
The set restarts and displays the Initial Setup screen. This
may take several minutes.
2-3-1. RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. If necessary, press
JUMP or OPTIONS to go to DIGITAL
mode.
4. Press
8
.
“SERVICE” changes to green RST.
5. Press MUTING.
RST executes the command and displays EXE.
6. Press
0
.
EXE-RST displays green, then red indicating the TV is
writing the data.
7. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
TIMER
Standby
POWER
8. Cycle AC Power (Unplug and Plug AC Cord from the AC
Outlet).
9. The set restarts and displays the Initial Setup screen.
This may take several minutes.
KDL-40HX800/46HX800/55HX800
31
SEC 3. DIAGRAMS
3-1. CIRCUIT BOARDS LOCATION
G4E (KDL-40HX800 ONLY)
G6B (KDL-46HX800/55HX800 ONLY)
SWITCH UNIT
HLR
HTD
BAL
Click on the first or last page to see other KDL-40HX800 / KDL-46HX800 / KDL-55HX800 service manuals if exist.