Sony KDL-40HX720 / KDL-40HX723 / KDL-40HX725 / KDL-46HX720 / KDL-46HX723 / KDL-46HX725 Service Manual ▷ View online
KDL-40/46HX720,723,725(AEP/UK)
41
ADJUSTMENT
3) Write data for “Digital” service mode. (
“002 MODEL”
category)
Note: This procedure operation, when replaced the B board.
Note: Do not write a wrong segment or destination information in Product ID.
When the wrong setting is written, TV may not operate.
000 SEG -----------------Select JDM code information
001 DEST ---------------Select destination information
002 MODELNAME ---Select model name
004 SERIAL ------------ Can be set only once for the new board
a. Change data for each model.
b. Press “Mute”, “0” on remote sequentially.
It shows red “
WRITE
”. It indicate writing is processing.
c. After a while. Red “WRITE” disappears. Writing process is done after a while.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
I‐1
Write
KDL-40/46HX720,723,725(AEP/UK)
42
ADJUSTMENT
SET TO SHIPPING CONDITION
How to do shipping condition.
a. Move to “Digital” service mode.
Press “8” on remote.
It shows green “
SERVICE
” changes to green “
RST-
”.
Press “mute” on remote.
Added green “
EXE
” after green “
RST-
” .
d. Press “0” on remote. Green “
EXE-RST
” changes to red “
EXE-RST
”. It indicate writing is processing.
After a while, red “
EXE-RST
” changes to green “
SERVICE
”.
And all LED lights.
Writing process is done at this point.
<Another way>
You can set to shipping condition w/o entering Service Mode.
-> “Cursor Up” on remote + “Power Key” on Front panel.
TIMER
Standby
POWER
KDL-40/46HX720,723,725(AEP/UK)
43
ADJUSTMENT
CHANGE THE EMITTER OUTPUT LEVEL
Note: To reduce the emitter LED output power strength.
Change Data of “VPC” service mode
a. Select
“005 TD”
category by pressing “2 / 5” on remote.
b. Select “000 EMIT_STR” item by pressing “1 / 4” on remote.
c. Change data from “0” to “1” by pressing “3 / 6” on remote.
0: Strong (Default)
1: Weak
d. Save by pressing “Mute” + “0” or ”10” & Reboot.
VPC
SERVICE
005
TD
000
EMIT_STR
1
KDL-40/46HX720,723,725(AEP/UK)
44
ADJUSTMENT
HDD REC SETTING
DIGITAL (REC_SETTING)
SERVICE
REC_SETTING
1 Key Copy
*2 HDD Re‐Register
(x) HDDs OK ( xx )
HDD Re-Register
a. Press “2” to select “HDD Re-Register” Item.
b
.
. Press “Enter” or “12” twice to execute the command.
c. If OK, xx= x+1
If NG, xx=x
Click on the first or last page to see other KDL-40HX720 / KDL-40HX723 / KDL-40HX725 / KDL-46HX720 / KDL-46HX723 / KDL-46HX725 service manuals if exist.