Sony KDL-40EX700 / KDL-52EX700 / KDL-60EX700 Service Manual ▷ View online
KDL-40/46/52/60EX700(CH)
13
SEC 2. ADJUSTMENT
CHASSIS
SERVICE
000
CXD2813R
000
H_DET_NOSIG_CNT 1
Category name Data
HOW TO ENTERING SERVICE MODE
1) Turn on the main power switch to place this set in standby mode.
2) Press the buttons on the remote commander as follows, and entering service mode.
2) Press the buttons on the remote commander as follows, and entering service mode.
3) Service mode display.
Note: First of all, when you enter Service Mode, you can see “Digital” service mode.
Whenever you press “OPTIONS” or “JUMP” on remote, each service mode is changed.
“Digital” -> “Chassis” -> “Sub”
“Digital” -> “Chassis” -> “Sub”
Press “OPTIONS”
or “JUMP” button
or “JUMP” button
DIGITAL
SERVICE
001 op
000 VERS
000 VERS
‐ ‐ ‐
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.301J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
‐‐‐.‐‐‐‐‐‐‐‐‐
‐‐‐.‐‐‐‐‐‐‐‐‐
Item number
Category number
Category number
KDL-40/46/52/60EX700(CH)
14
ADJUSTMENT
4) How to use the remote commander.
5) After entering service mode, then turn off the power switch.
Function
The flow of control
Service mode on
<Test>+<TV>/<Display><5><Vol Up><Power>
Service mode off
<Other> / <Power off + on>
Item up / down
<1>/<4>
Category up / down
<2>/<5>
Data up / down
<3>/<6>
Test reset
<8> + <Mute> + <0>
Read data
<9> + <0>
Execute
<10 or 0>
Write data
<Mute> + <0>
Change module
<Jump> / <Option>
KDL-40/46/52/60EX700(CH)
15
ADJUSTMENT
WHITE BALANCE ADJUSTMENT
Note: Please execute this adjustment if necessary.
Change Data of “Digital” service mode. (
Note: Please execute this adjustment if necessary.
Change Data of “Digital” service mode. (
“006 WB”
category)
a. Press “0” or “10” on remote to enter WB adjustment mode.
b. Press number key “1”~”6” directly. “*” stamp move.
c. Press “12 / enter / select” to decide and advance next step.
b. Press number key “1”~”6” directly. “*” stamp move.
c. Press “12 / enter / select” to decide and advance next step.
When returning on the previous page, press “return”.
d. Change data by number key “0”~”9” directly. (0-255)
e. Press “12 / enter / select” to save data.
e. Press “12 / enter / select” to save data.
It shows red “
WRITE
”. It indicate writing is processing.
f. Writing process is done at this point.
DIGITAL
SERVICE
006 WB
000 WHITE_BALANCE ___
000 WHITE_BALANCE ___
DIGITAL
SERVICE
WB
*1 R_DRV 128
*1 R_DRV 128
2 G_DRV 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
Please input WB items
(0‐255)
‐‐‐
(0‐255)
‐‐‐
Gain
0: x 0.5, 128: x 1, 255: x1.5
Offset
128: offset 0
KDL-40/46/52/60EX700(CH)
16
ADJUSTMENT
SAVE CHANGING DATA
1) Change Data of “Chassis” or “Sub” service mode
2) Write data for “Chassis” or “Sub” service mode
2) Write data for “Chassis” or “Sub” service mode
a. Press “Mute” on remote.
It shows green “
SERVICE
” changes to green “
WRITE
”.
b. Press “0” or “enter” on remote. Green “
WRITE
” changes to red “
WRITE
”. It indicate writing is processing.
c. After a while, red “
WRITE
” changes to green “
SERVICE
”. Writing process is done at this point.
3) TV reboot is necessary for applying data change.
CHASSIS
WRITE
000
CXD2813R
000
H_DET_NOSIG_CNT 1
Click on the first or last page to see other KDL-40EX700 / KDL-52EX700 / KDL-60EX700 service manuals if exist.