DOWNLOAD Sony KDL-32HX750 / KDL-40HX750 / KDL-46HX750 / KDL-55HX750 Service Manual ↓ Size: 21.15 MB | Pages: 127 in PDF or view online for FREE

KDL-32/40/46/55HX750(K)

9

When an error occurs, the STANDBY LED will flash a set number of times to 
indicate the possible cause of the problem.

If there is more than one error, the LED will identify the first of the problem areas.

Result for all of the following diagnostic items are displayed on screen.

If the screen displays a “0”, no error has occurred .

The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to flash.
The number of times the LED flashes translates to a probable source of the problem.
A definition of the STANDBY LED flash indicators is listed in the instruction manual for the user’s knowledge and reference.
If an error symptom cannot be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these 
problems occur.

0.5

0.5

3

SELF-DIAGNOSTIC SCREEN DISPLAY
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to bring up past occurrences of failure for 
confirmation on the screen:

[To Bring Up Screen Test]
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:

5

*

 : Note that this differs from entering the service mode (volume +)

*

DISPLAY

TV POWER

Channel

Volume

2

MAIN_POWE

Main Power Over Voltage Protection

DC_ALERT

DC_ALERT

AUD_PROT

Audio Abnorm al Detection

HDMI_EQ

HDMI equalizer/s witch I2C NACK

TU_DEMOD

Tuner or dem odulator I2C NACK

4

-

Not us ed

HFR_ERR

HFR Error

TCON_ERR

T-CON Error

P_ID_ERR

Panel ID NVM Error

6

BACKLITE

LED driver protection

TEMP_ERR

Therm al Error

FAN_ERR

Not us ed

8

-

Software Error (Als o the m ain board’s  m em ory or Wi-Fi
m odule is  a s us pect)

9

-

Not us ed

10

EMIT_ERR

Trans m itter board not connected

11

-

Not us ed

12

-

Not us ed

3

5

7

KDL-32/40/46/55HX750(K)

10

SELF CHECK

000 RESERVED   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
000 RESERVED   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
002 MAIN_POWE  ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
003 DC_ALERT   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
003 AUD_PROT   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
003 HDMI_EQ    ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
003 TU_DEMOD   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
004 VLED       ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
004 LD_ERR     ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
005 HFR_ERR    ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
005 TCON_ERR   1108231325 ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 01
005 P_ID_ERR   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
006 BACKLITE   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
007 TEMP_ERR   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
007 FAN_ERR    ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
010 EMITTER    ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
101 VPC_WDT    ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
102 MEPS_WDT   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
103 HOST_WDT   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00
104 STBY_WDT   ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ ‐‐‐‐‐‐‐‐‐‐ 00

0081‐00671‐00088

Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen.
After you have completed the repairs, clear the result display to “0”.

Clearing the Self Check Diagnostic List

1. Error history and Error count :

Press the Channel 8 => Channel 0 .

2. Panel operation time :

Press the Channel 7 => Channel 0 .

Exiting the Self-diagnostic screen
To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on the TV.

Error count (00-99)

Error history (Last failure time beforehand) *1
Error history (Failure time before last) *1
Error history (The last failure time) *1

Item name

STBY LED flash time

Total operation time by hour (MAX:65535)

Boot count (MAX:65535)

Panel operation time by hour (MAX:65535)

CPU Watch-dog timer

*1 : Format of error history

YYMMDDhhmm (in UTC)
Example:1108231325 -> Aug 23 13:25 2011 UTC

KDL-32/40/46/55HX750(K)

11

• There are clutch in the yellow frame[           ]. Therefore please be careful in the case of the disassembly or assembly of parts.

Note: When removing the rear cover, to prevent damaging the rear cover, please refer Appendix 1.

KDL-32/40/46/55HX750(K)

12

HEAD STAND

NECK TP

BASE STAND

3 Screws (SCREW, +PSW M5X16 LOCK) P/N: 4-421-427-01

1 Screw (SCREW, +PSW M5X16 LOCK) P/N: 4-421-427-01

3 Screws (SCREW, +PSW M5X16 LOCK) P/N: 4-421-427-01