Sony KDL-32HX750 / KDL-32HX755 Service Manual ▷ View online
KDL-32HX750/32HX755 36
SECTION 5 - UPDATES AND ADJUSTMENTS
COMPLETING SERVICE REQUIREMENTS WHEN
REPLACING THE LCD PANEL OR TCON BOARD
The following must be performed after replacing the LCD Panel or TCON
Board to ensure that all of the features for the TV will be available.
●
Updating the Software
●
Confirm Model ID and Product ID
●
Reset the Panel Operation Time
●
Clear the Self Diagnosis Self Check information
UPDATING THE SOFTWARE
After replacing the LCD Panel or TCON Board you MUST UPDATE the
SOFTWARE to the latest version.
There are 2 situations that can occur after replacing the LCD Panel or
TCON Board.
1. After replacing the LCD Panel or TCON Board, turn the TV ON.
Case 1 - If there is no picture displayed and lights flash on the front
panel, insert the USB device. The update will start automatically.
NOTE: This update may take up to 5 minutes to complete. Do not
remove the USB device, turn off the TV, or unplug the power cord
while the update is in progress.
Case 2 - If the picture displays, you will need to reset the LCD
Panel ID to force update the software. Proceed to
“Resetting the
LCD Panel to Update the Software”.
2. After the update is complete, proceed to “Confirming the Model ID
and Product ID.”
CONFIRMING THE MODEL ID AND PRODUCT ID
After completing all of the service adjustment changes, verify that the
correct Model ID and Product ID displays in the Service menu.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
3. Press
JUMP
or
OPTIONS
on the Remote Commander until
the
DIGITAL menu displays.
4. If necessary, press
4
to move to the
001 OP category.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
MID:0C33A221
-------------------
PID:04182040
-------------------
PNL:LTY320HQ0101
TUNER: ENABLE
-------------------
-------------------
5. Using the information provided in the table, verify the Model ID and
Product ID are correct.
Model Name Destination
Panel Name
Model‐ID Product‐ID
KDL‐32HX750
LA/MX
LTY320HQ0101 0C33A121 03042040
KDL‐32HX750
LA/MX
LTY320HQ0102 0C33A121 03042040
KDL‐32HX755 CHILE/PERU LTY320HQ0101 0C33A221 04182040
KDL‐32HX755 CHILE/PERU LTY320HQ0102 0C33A221 04182040
KDL‐32HX755
KDL‐32HX755 CHILE/PERU LTY320HQ0102 0C33A221 04182040
KDL‐32HX755
VZ
LTY320HQ0101 0C33A221 04182040
KDL‐32HX755
VZ
LTY320HQ0102 0C33A221 04182040
KDL-32HX750/32HX755 37
SECTION 5 - UPDATES AND ADJUSTMENTS
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
-------------------
PID:04182040
-------------------
PNL:LTY320HQ0101
TUNER: ENABLE
-------------------
-------------------
Model ID
Software Version
Panel ID
Product ID
MID:0C33A221
6. Exit service mode by turning the TV power off.
7. Cycle AC Power.
7. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
8. Wait a minute while lights flash, and initial setup screen shows.
9. Proceed to “
9. Proceed to “
Resetting the Panel Operation Time
”.
RESETTING THE PANEL OPERATION TIME
After completing all steps, reset the panel operation time from the Self
Check screen.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
;
Confirmed Model ID and Product ID
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
-
POWER
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
Panel operation time
Panel operation time
4. To clear the LCD Panel operating hours after replacing the LCD
Panel, press
7
0
.
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 00000
Panel operation time
Panel operation time
KDL-32HX750/32HX755 38
SECTION 5 - UPDATES AND ADJUSTMENTS
5. Proceed to
“Clearing the Self Diagnosis Self Check Information”.
CLEARING THE SELF DIAGNOSIS SELF CHECK
INFORMATION
After resetting the panel operation time, clear the Self Check screen.
6. To clear the error history and error count
press
8
0
.
SELF CHECK
000 RESERVED
--------------------- --------------------- --------------------- 00
000 RESERVED
--------------------- --------------------- --------------------- 00
002 MAIN_POWE --------------------- --------------------- --------------------- 00
003 DC_ALERT
003 DC_ALERT
--------------------- --------------------- --------------------- 00
003 AUD_PROT
--------------------- --------------------- --------------------- 00
003 HDMI_EQ
--------------------- --------------------- --------------------- 00
003 TU_DEMOD --------------------- --------------------- --------------------- 00
004 VLED
004 VLED
--------------------- --------------------- --------------------- 00
004 LD_ERR
--------------------- --------------------- --------------------- 00
005 HFR_ERR
--------------------- --------------------- --------------------- 00
005 TCON_ERR
--------------------- --------------------- --------------------- 00
005 P_ID-ERR
--------------------- --------------------- --------------------- 00
006 BACKLITE
--------------------- --------------------- --------------------- 00
007 TEMP_ERR
--------------------- --------------------- --------------------- 00
007 FAN_ERR
--------------------- --------------------- --------------------- 00
010 EMITTER
--------------------- --------------------- --------------------- 00
101 VPC_WDT
--------------------- --------------------- --------------------- 00
102 MEPS_WDT --------------------- --------------------- --------------------- 00
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
103 HOST_WDT --------------------- --------------------- --------------------- 00
104 STBY_WDT
--------------------- --------------------- --------------------- 00
00345 000333 06789
7. Exit Self Check by turning the TV power off.
8. Cycle AC Power.
8. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
OPTIONAL ADJUSTMENTS
All Sony TVs are set for optimal viewing performance. Refer to the following
instructions if the customer requests additional adjustments.
ENABLING VCOM TO ADJUST THE PICTURE
The VCOM adjustment displays a Green screen while you adjust the picture.
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
MID:0C33A221
-------------------
PID:04182040
-------------------
PNL:LTY320HQ0101
TUNER: ENABLE
-------------------
-------------------
4. Press
JUMP
or
OPTIONS
on the Remote Commander until the
VPC menu displays.
KDL-32HX750/32HX755 39
SECTION 5 - UPDATES AND ADJUSTMENTS
5. Press
2
to move to the
002 VCOM category.
VPC
SERVICE
002
000
VCOM
ENABLE 0
6. Enable the
VCOM by pressing
3
to increase the data value to
1.
7. Press
1
to move to the
001 ADJUST item.
VPC
SERVICE
002
001
VCOM
ADJUST 64
8. Change the value of the
001 ADJUST item to adjust the picture by
pressing
3
to increase the data value or
6
to decrease the data
value.
NOTE: When changing the data value, the screen will turn green
for approximately 3 seconds before returning to the service
adjustment screen.
VPC
SERVICE
001
001
VCOM
ADJUST 69
9. When the picture is clear, press
MUTING
then
0
to WRITE
(Save) the changes.
VPC
WRITE
002
001
VCOM
ADJUST 64
10. Do one of the following:
a. If adjustments are complete, exit service mode by turning the
TV power off.
b. Proceed to
“Setting White Balance Adjustments”.
SETTING WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 0
11. Press
2
to move to “006 WB” Category.
VPC
SERVICE
006
000
WB
R_DRV 128
12. To change the data value of the
R_DRV, press
3
to increase the
value or
6
to decrease the value.
NOTE: The data value must be set between the range 1 to 255.
13. Press
1
to move to the next item (
001 G_DRV).
14. To change the data value, press
3
to increase the value or
6
to
decrease the value.
15. Repeat steps 6 and 7 for each of the following items:
002 B_DRV
003 R_BKG
004 G_BKG
005 B_BKG
Click on the first or last page to see other KDL-32HX750 / KDL-32HX755 service manuals if exist.