Sony KDL-32HX750 / KDL-32HX755 Service Manual ▷ View online
KDL-32HX750/32HX755 28
SECTION 5 - UPDATES AND ADJUSTMENTS
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
MID:0C33A221
-------------------
PID:04182040
-------------------
PNL:LTY320HQ0101
TUNER: ENABLE
-------------------
-------------------
SAMPLE DIGITAL SERVICE MENU
press
or
JUMP
OPTIONS
Within each Service Menu are Categories and data information.
CHASSIS
SERVICE
000
000
WYVERN
S2_NOISE_TH 32
Data Value
Item Name
Category Number
Item Number
Category Name
SERVICE DATA DEFINITIONS
5. Press
2
to move to the next category until the
002 MODEL
category displays.
DIGITAL
SERVICE
002 MODEL
000 SEG
3a_BASE
6. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the correct segment code
data value.
Model Name Code Name Data Value
KDL‐32HX750
3a
3a_BASE
KDL‐32HX755
3a
3a_BASE
7. Press
MUTING
then press
0
to WRITE (Save) the changes.
DIGITAL
SERVICE
002 MODEL
000 SEG
3a_BASE
WRITE
When complete, the screen briefly indicates the process is “Done”.
DIGITAL
SERVICE
002 MODEL
000 SEG
3a_BASE
DONE
8. Exit service mode by turning the TV power off.
9. Cycle AC Power.
9. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
10. Wait a minute while lights flash, and initial setup screen shows.
11. Proceed to
11. Proceed to
“Selecting the Destination”.
SELECTING THE DESTINATION
The correct destination needs to be selected after replacing the Main Board.
CAUTION: Selecting the incorrect destination may require replacing the
Main Board.
KDL-32HX750/32HX755 29
SECTION 5 - UPDATES AND ADJUSTMENTS
Verify before proceeding to the next step:
;
Updated the Software
;
Selected the Segment Code
1. Take the TV out of deep Standby mode by pressing
POWER
to
turn on the TV.
2. Press
POWER
to turn the TV back off.
3. Access Service Mode by pressing the following buttons on the
Remote Commander within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
4. Press
2
to move to the next category until
002 MODEL category
displays.
5. Press
1
to move to the next item until
001 DEST item displays.
DIGITAL
SERVICE
002 MODEL
001 DEST
ISDB-LTN_NO-GIN
6. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the correct destination of
the TV.
Model Name Destination
Data Value
KDL‐32HX750
LA/MX
ATSC‐LTN_BASE
KDL‐32HX755 CHILE/PERU ISDB‐LTN_NO‐GIN
KDL‐32HX755
KDL‐32HX755
VZ
ISDB‐LTN_NO‐GIN
CAUTION: Verify the DESTINATION is set correctly before
proceeding. If the incorrect destination Data Value is selected, it
may corrupt the software requiring a Main Board replacement.
7. Press
MUTING
then
0
to WRITE (Save) the changes.
DIGITAL
SERVICE
002 MODEL
001 DEST
ISDB-LTN_NO-GIN
WRITE
When complete, the screen briefly indicates the process is “Done”.
DIGITAL
SERVICE
002 MODEL
001 DEST
ISDB-LTN_NO-GIN
DONE
8. Proceed to
“Selecting the Model Name”.
SELECTING THE MODEL NAME
The correct model name needs to be selected to ensure all of the TV
features are available.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Updated the Software
;
Selected the Segment Code
;
Selected the Destination
9. Press
1
to move to the
002 MODELNAME item.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-32HX755
KDL-32HX750/32HX755 30
SECTION 5 - UPDATES AND ADJUSTMENTS
10. If the correct model does not display, press
3
until the model
displayed matches the model of the TV.
11. Press
MUTING
then press
0
to WRITE (Save) the changes.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-32HX755
WRITE
When complete, the screen briefly indicates the process is “Done”.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-32HX755
DONE
12. Proceed to
“Adding the Serial Number”..
ADDING THE SERIAL NUMBER
The replacement board does not contain a serial number. Use the following
instructions to add the customer’s serial number.
CAUTION: The serial number can only be entered once. Please make sure
to enter the correct serial number for the customer’s TV.
Verify before proceeding to the next step:
;
Updated the Software
;
Selected the Segment Code
;
Selected the Destination
;
Selected the Model Name
13. Locate the serial number for the TV on the side of the Rear Cover
of the TV.
MODEL NO
KDL-32HX755
SERIAL NO
5000092
14. Press
JUMP
or
OPTIONS
on the Remote Commander until the
DIGITAL menu displays.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
MID:0C33A221
-------------------
PID:04182040
-------------------
PNL:LTY320HQ0101
TUNER: ENABLE
-------------------
-------------------
15. Press
2
to move to the
002 MODEL category.
DIGITAL
SERVICE
002 MODEL
000 SEG
3A_BASE
16. Press
1
until the
003 SERIAL item displays.
DIGITAL
SERVICE
002 MODEL
003 SERIAL
---
KDL-32HX750/32HX755 31
SECTION 5 - UPDATES AND ADJUSTMENTS
17. Press
0
to display the
Serial Number Edit option.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
*1 SerialNumber
18. Press the select button
to display the
Serial Number input
screen.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
*1 SerialNumber
Please input serial number
(0000000-9999999)
----------------
CAUTION: The serial number can only be entered once. Please
make sure to enter the correct serial number for the customer’s TV.
19. Using the remote commander, enter the serial number of the TV.
NOTE: If the incorrect serial number is entered, press
to go back to the Serial Number input screen and re-enter the
correct serial number.
20. After confirming the serial number, press the select button
to
WRITE (Save) the serial number to the replacement Main Board.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
*1 SerialNumber
Please input serial number
(0000000-9999999)
5000092
WRITE
When complete, the screen indicates the process is “Done”, then
the serial number displays.
DIGITAL (MODEL)
SERVICE
SerialNumberEdit
*1 SerialNumber
*1 SerialNumber
Please input serial number
(0000000-9999999)
5000092 DONE
21. Proceed to “Confirming the Model ID and Product ID.
Click on the first or last page to see other KDL-32HX750 / KDL-32HX755 service manuals if exist.