Sony KDL-32EX725 / KDL-46EX725 Service Manual ▷ View online
KDL-32EX725/46EX725/55EX725
63
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
ACCESSORIES AND PACKAGING
4-191-241-01 FLYER
4-273-015-31
MANUAL, INSTRUCTION
MISCELLANEOUS
A-1811-852-A
BAG, SCREW ASSEMBLY(L)
(KDL-46EX725/55EX725 ONLY)
CONTAINS THE FOLLOWING SCREWS:
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-259-541-01
USER SCREW ST
(SCREWS TO ATTACH HEAD STAND AND BASE STAND TO NECK)
A-1811-853-A
BAG, SCREW ASSEMBLY(M)
(KDL-32EX725 ONLY)
CONTAINS THE FOLLOWING SCREWS:
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-259-541-01
USER SCREW ST
(SCREWS TO ATTACH HEAD STAND AND BASE STAND TO NECK)
4-262-708-01
CLAMPER, CABLE
4-281-014-01
DOUBLE SIDED TAPE (PANEL 10)
(KDL-55EX725 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-272-200-01
DOUBLE SIDED TAPE (PANEL)
(ALL MODELS EXCEPT KDL-55EX725)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-188-302-11
HEX WRENCH
4-257-907-01
JOINT, STAND
(SCREWS USED WHEN STAND IS ATTACHED - NOT USED WITH WALL MOUNTS)
4-100-136-01
SHEET (CORE), C(ALL MODELS EXCEPT KDL-32EX725)
4-256-443-01
SHEET, RADIATION (BAT-L/V)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-256-454-02
SPACER (G A)
(KDL-55EX725 ONLY)
X-2549-230-1
SUPPORT BELT KIT
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
REMOTE COMMANDER
1-489-474-21
REMOTE COMMANDER (RM-YD062)
KDL-32EX725/46EX725/55EX725
64
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
WIRE DRESSING
KDL-55EX725 ONLY
FIGURE 6-3. KDL-55EX725 OVERALL WIRE DRESSING
KDL-32EX725 ONLY
FIGURE 6-1. KDL-32EX725 OVERALL WIRE DRESSING
KDL-46EX725 ONLY
FIGURE 6-2. KDL-46EX725 OVERALL WIRE DRESSING
KDL-32EX725/46EX725/55EX725 65
SECTION 7 - SERVICE ADJUSTMENTS
OVERVIEW
As mentioned in
“Section 2 - Software Requirements” on page 13
, the
models in this manual utilize a generic type Main Board, therefore
certain service adjustments settings must be changed or confirmed
when either the Main Board, LCD Panel, or TCON Board are
replaced.
UPDATING THE SOFTWARE
After replacing the Main Board, LCD Panel, or TCON Board, you
MUST UPDATE the SOFTWARE to the latest version.
ACCESSING SERVICE ADJUSTMENT
MODE
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY
Channel 5
Volume +
POWER .
DISPLAY
RM-YD062
5
VOLUME+
POWER
KDL-32EX725/46EX725/55EX725 66
SECTION 7 - SERVICE ADJUSTMENTS
3. The
DIGITAL Service Menu displays.
NOTE: There are 3 Service Menus for this model,
DIGITAL, CHASSIS, and VPC. If the DIGITAL Service
Menu is not displayed, press
JUMP
or
OPTIONS
on the
Remote Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:1C117081
PM1.012W00LU
PID:0402000
PB1.000W00LU
PNL::LTY550HJ0301
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
Figure 7-1. Sample Digital Service Menu
press
or
JUMP
OPTIONS
CHASSIS
SERVICE
000
000
WYVERN
S2_NOISE_TH 32
Figure 7-2. Sample Chassis Service Menu
VIEWING OR CHANGING SERVICE DATA
Within each Service Menu are Categories and data information.
CHASSIS
SERVICE
000
000
WYVERN
S2_NOISE_TH 32
Data Value
Item Name
Category Number
Item Number
Category Name
Figure 7-3. Service Data Definitions
Use the buttons on the Remote Commander to review or change the
service data.
4. To change the Category, press
2
to move to the
Next Category or press
5
to go back to the Previous
Category.
Note: Pressing
2
or
5
only changes the Categories
within the Service Menu displayed.
5. To change the adjustment item, press
1
to move to
the Next Item or
4
to go back to the Previous Item.
6. To change the Data Value, press
3
to increase the
Data Value or
6
to decrease the Data Value.
4. Press
MUTING
then press
0
to WRITE (Save) the
changes.
5. To exit service mode, press
HOME
or turn the TV
power off.
Click on the first or last page to see other KDL-32EX725 / KDL-46EX725 service manuals if exist.