Sony KDL-32EX710 / KDL-40EX710 / KDL-40EX713 / KDL-46EX710 / KDL-46EX711 / KDL-46EX713 / KDL-55EX710 / KDL-55EX711 / KDL-55EX713 Service Manual ▷ View online
KDL-32EX710/40EX710/40EX713/46EX710/46EX711/46EX713/55EX710/55EX711/55EX713 24
SERVICE ADJUSTMENTS
2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD
OR LCD PANEL
The following procedures must be completed after replacing the BAL
Board or the LCD panel.
þ
Update the TV to the latest software version
þ
Select the Model
þ
Select the Destination
þ
Verify model and panel information are correct
þ
Reconnect all cables
2-2-1. UPDATING THE SOFTWARE
After replacing the BAL Board or the LCD Panel, you must update the
software to the latest version.
Before you begin:
Before you begin:
þ
Disconnect all cables (RF, External input, Ethernet, etc.)
from the TV
Instructions for updating the software are included with the software
package. After completing the software update, proceed to “Selecting
the Model”.
2-2-2. SELECTING THE MODEL
After replacing the BAL Board or LCD Panel, go into Service Mode to set
the Model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
KDL-32EX710/40EX710/40EX713/46EX710/46EX711/46EX713/55EX710/55EX711/55EX713 25
SERVICE ADJUSTMENTS
4. Press
2
to move to the
002 MODEL (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis
Model
Name
Data Value
Code Name
AZ1-L KDL-32EX710
25
3a-0.3
AZ1-L KDL-40EX710
25
3a-0.3
AZ1-L KDL-40EX713
25
3a-0.3
AZ1-L KDL-46EX710
25
3a-0.3
AZ1-L KDL-46EX711
25
3a-0.3
AZ1-L KDL-46EX713
25
3a-0.3
AZ1-L KDL-55EX710
25
3a-0.3
AZ1-L KDL-55EX711
25
3a-0.3
AZ1-L KDL-55EX713
25
3a-0.3
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
Data Value
Code Name
6. Proceed to “Selecting the Destination”.
2-2-3. SELECTING THE DESTINATION
After replacing the BAL Board or the LCD Panel, the destination location
must be set.
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software
which would require a BAL Board replacement.
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
KDL-32EX710/40EX710/40EX713/46EX710/46EX711/46EX713/55EX710/55EX711/55EX713 26
SERVICE ADJUSTMENTS
7. Press
1
to move to “
001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROUP
DESTINATION
CODE
DATA
VALUE
DESTINATION
UC
3
US/CND
LTN-D
16
MX/LATIN AMERICA
UC grp
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
Data Value
Destination
9. After verifying the destination data value displays,
press
0
to save (Write) the changes.
10. Exit Service Mode by pressing HOME or
turn the TV power off.
11. Proceed to “Verifying the Model and Panel Information”.
2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID
PID
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
Model ID
Product ID
Panel
Code
2577318E
40520000
LK315D3LA4S
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
KDL-32EX710/40EX710/40EX713/46EX710/46EX711/46EX713/55EX710/55EX711/55EX713 27
SERVICE ADJUSTMENTS
Model Name
Model ID
Product ID
Panel ID
KDL-32EX710
2577318E
40520000
LK315D3LA4S
KDL-32EX710
2577318E
40520000
LK320D3LEDE120
KDL-32EX710
2577318E
0C520000
LK315D3LA4S
KDL-32EX710
2577318E
0C520000
LK320D3LEDE120
KDL-40EX710
2577361B
30520000
LK400D3LA4S
KDL-40EX710
2577361B
30520000
LK400D3LEDE120
KDL-40EX710
2577319B
40520000
LK400D3LA4S
KDL-40EX710
2577319B
40520000
LK400D3LA4T
KDL-40EX710
2577319B
40520000
LK400D3LEDE120
KDL-40EX710
2577319B
0C520000
LK400D3LA4S
KDL-40EX710
2577319B
0C520000
LK400D3LA4T
KDL-40EX710
2577319B
0C520000
LK400D3LEDE120
KDL-40EX713
2577319B
0C520000
LK400D3LA4S
KDL-40EX713
2577319B
0C520000
LK400D3LA4T
KDL-40EX713
2577319B
0C520000
LK400D3LEDE120
KDL-46EX710
2577361C
30520000
LK460D3LA8S
KDL-46EX710
2577361C
30520000
LK460D3LA8T
KDL-46EX710
2577361C
30520000
LK460D3LEDE120
KDL-46EX710
25773626
30520000
LTY(Z)460HJ02
KDL-46EX710
2577319C
40520000
LK460D3LA8S
KDL-46EX710
2577319C
40520000
LK460D3LA8T
KDL-46EX710
2577319C
40520000
LK460D3LEDE120
KDL-46EX710
257731A6
40520000
LTY(Z)460HJ02
KDL-46EX710
2577319C
0C520000
LK460D3LA8S
KDL-46EX710
2577319C
0C520000
LK460D3LA8T
KDL-46EX710
2577319C
0C520000
LK460D3LEDE120
KDL-46EX710
257731A6
0C520000
LTY(Z)460HJ02
KDL-46EX711
2577319C
0C520000
LK460D3LA8S
KDL-46EX711
2577319C
0C520000
LK460D3LA8T
KDL-46EX711
2577319C
0C520000
LK460D3LEDE120
KDL-46EX711
257731A6
0C520000
LTY(Z)460HJ02
Model Name
Model ID
Product ID
Panel ID
KDL-46EX713
2577319C
0C520000
LK460D3LA8S
KDL-46EX713
2577319C
0C520000
LK460D3LA8T
KDL-46EX713
2577319C
0C520000
LK460D3LEDE120
KDL-46EX713
257731A6
0C520000
LTY(Z)460HJ02
KDL-55EX710
2577361D
30520000
LK520D3LB1S
KDL-55EX710
2577361D
30520000
LK520D3LEDE120
KDL-55EX710
2577319D
40520000
LK520D3LB1S
KDL-55EX710
2577319D
40520000
LK520D3LEDE120
KDL-55EX710
2577319D
0C520000
LK520D3LB1S
KDL-55EX710
2577319D
0C520000
LK520D3LEDE120
KDL-55EX711
2577319D
0C520000
LK520D3LB1S
KDL-55EX711
2577319D
0C520000
LK520D3LEDE120
KDL-55EX713
2577319D
0C520000
LK520D3LB1S
KDL-55EX713
2577319D
0C520000
LK520D3LEDE120
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
2-2-5. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
Click on the first or last page to see other KDL-32EX710 / KDL-40EX710 / KDL-40EX713 / KDL-46EX710 / KDL-46EX711 / KDL-46EX713 / KDL-55EX710 / KDL-55EX711 / KDL-55EX713 service manuals if exist.