Sony KDL-32EX705 / KDL-40EX705 / KDL-46EX705 Service Manual ▷ View online
KDL-32EX705/40EX705/46EX705
24
SERVICE ADJUSTMENTS
2-4. RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments
and Channel Memory settings to the preset factory conditions.
and Channel Memory settings to the preset factory conditions.
1. While holding down the
on the Remote Commander,
press the POWER button on the TV Switch Unit of the set.
The set restarts and displays the Initial Setup screen. This
may take several minutes.
may take several minutes.
2-4-1. RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. If necessary, press JUMP or OPTIONS to go to DIGITAL
mode.
4. Press
8
.
“SERVICE” changes to green RST.
5. Press
MUTING .
RST executes the command and displays EXE.
6. Press
0
.
EXE-RST displays green, then red indicating the TV is
writing the data.
writing the data.
7. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
TIMER
Standby
POWER
8. Cycle AC Power (Unplug and Plug AC Cord from the AC
Outlet).
9. The set restarts and displays the Initial Setup screen.
This may take several minutes.
KDL-32EX705/40EX705/46EX705
25
SEC 3. DIAGRAMS
3-1. CIRCUIT BOARDS LOCATION
GE2B (KDL-46EX705 ONLY)
GE3A (KDL-32EX705/40EX705 ONLY)
HMS2
SWITCH UNIT
HLR
BAL
KDL-32EX705/40EX705/46EX705
26
DIAGRAMS
3-2. BLOCK
DIAGRAM
KDL-32EX705/40EX705/46EX705
27
Sony Corporation
Sony Technology Center
Technical Services
Service Promotion Department
9-888-299-01
English
2010Cj74WEb-1
Printed in USA
© 2010.3
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved