Sony KDL-32EX427 / KDL-32EX527 / KDL-40EX527 / KDL-46EX527 Service Manual ▷ View online
KDL-32EX427/32EX527/40EX527/46EX527 55
SECTION 7 - SERVICE ADJUSTMENTS
UPDATING SERVICE ADJUSTMENT DATA
WHEN REPLACING THE MAIN BOARD
The following procedures must be performed after replacing the
Main Board and updating the software to ensure that the service
adjustment data is accurate.
If the following adjustments are not completed, some of the features
If the following adjustments are not completed, some of the features
for the television will not be available.
● Select the Segment Code
● Select the Destination
● Select the Model Name
● Select the BU Trans
● Add the Serial Number
● Confirm Model ID and Product ID
SELECTING THE SEGMENT CODE
Before proceeding, update the software to the latest version. After
updating the software, go into Service Mode to select the correct
Segment Code data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY
Channel 5
Volume +
POWER .
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:1D95E756
PM1.012W00LU
PID:10080000
PB1.000W00LU
PNL:LTY460HN0202
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
3. Press
2
to move to the
002 MODEL category.
DIGITAL
SERVICE
002 MODEL
000 SEG
I1
KDL-32EX427/32EX527/40EX527/46EX527 56
SECTION 7 - SERVICE ADJUSTMENTS
4. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the correct
segment code data value.
Model Name
Code Name
Segment
Code
KDL-32EX527
P-1
I1
KDL-40EX527
P-1
I1
KDL-46EX527
P-1
I1
5. Press
MUTING
then press
0
to WRITE (Save) the
changes.
DIGITAL
SERVICE
002 MODEL
000 SEG
I1
WRITE
When complete, the screen briefly indicates the process is
“Done”.
DIGITAL
SERVICE
002 MODEL
000 SEG
I1
DONE
6. Exit service mode by pressing
HOME
and then turn the
TV power off.
7. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
8. Wait a minute while lights flash, and initial setup screen
shows.
9. Proceed to “Selecting the Destination”.
SELECTING THE DESTINATION
The correct destination needs to be selected after replacing the Main
Board.
CAUTION: Selecting the incorrect destination may require replacing
the Main Board.
Verify before proceeding to the next step:
;
Selected the Segment Code
1. TV must be in standby mode. (Power off).
KDL-32EX427/32EX527/40EX527/46EX527 57
SECTION 7 - SERVICE ADJUSTMENTS
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY Channel 5 Volume + POWER
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:1D95E756
PM1.012W00LU
PID:10080000
PB1.000W00LU
PNL:LTY460HN0202
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
3. Press
2
to move to the
002 MODEL category
4. Press
1
to move to the
001 DEST item.
DIGITAL
SERVICE
002 MODEL
001 DEST
LTN-DVB
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the correct
destination of the TV.
Model Name
Destination
Data Value
KDL-32EX527
CO
LTN-DVB
KDL-40EX527
CO
LTN-DVB
KDL-46EX527
CO
LTN-DVB
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a Main Board replacement.
6. Press
MUTING
then press
0
to WRITE (Save) the
changes.
DIGITAL
SERVICE
002 MODEL
001 DEST
LTN-DVB
WRITE
KDL-32EX427/32EX527/40EX527/46EX527 58
SECTION 7 - SERVICE ADJUSTMENTS
When complete, the screen briefly indicates the process is
“Done”.
DIGITAL
SERVICE
002 MODEL
001 DEST
LTN-DVB
DONE
7. Proceed to “Selecting the Model Name”.
SELECTING THE MODEL NAME
The correct model may need to be selected after updating the
software.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Selected the Segment Code
;
Selected the Destination
8. Press
1
to move to the
002 MODEL item.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-40EX527
9. If the correct model does not display, press
3
until the
model displayed matches the model of the TV.
10. Press
MUTING
then press
0
to WRITE (Save) the
changes.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-40EX527
WRITE
When complete, the screen briefly indicates the process is
“Done”.
DIGITAL
SERVICE
002 MODEL
002 MODELNAME
KDL-40EX527
DONE
11. Proceed to “Selecting the BU Trans”.
Click on the first or last page to see other KDL-32EX427 / KDL-32EX527 / KDL-40EX527 / KDL-46EX527 service manuals if exist.