Sony KDL-32EX427 / KDL-32EX527 / KDL-40EX527 / KDL-46EX527 Service Manual ▷ View online
KDL-32EX427/32EX527/40EX527/46EX527 51
SECTION 6 - DISASSEMBLY/PART NUMBER INFOR
MATION
ACCESSORIES AND PACKAGING
X-2560-379-1
BAG, SCREW ASSEMBLY (L)
(KDL-46EX527 ONLY)
CONTAINS THE FOLLOWING:
4-188-302-11
HEX WRENCH
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-259-541-01
USER SCREW ST
(SCREWS TO ATTACH NECK TO HEAD STAND AND BASE STAND)
3-299-071-05
FLYER, SAFETY
4-273-074-11
FLYER, SAFETY
4-273-010-31
MANUAL, INSTRUCTION
!
1-838-797-11
POWER-SUPPLY CORD (WITH CONN.)
4-159-298-01
SCREW, +PSW M4X10
(KDL-32EX427/32EX527/40EX527 ONLY)
*
4-270-904-11
SUPPLEMENT(STAND INSTALLATION)
(KDL-46EX527 ONLY)
MISCELLANEOUS
4-262-708-01
CLAMPER, CABLE
4-272-200-01
DOUBLE SIDED TAPE (PANEL)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-100-136-01
SHEET (CORE), C
(KDL-40EX527/46EX527 ONLY)
4-256-443-01
SHEET, RADIATION (BAT-L/V)
7-600-031-96
TAPE (3M 1350FW-1)15MMX66M WHT
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
OPTIONAL ACCESSORIES
X-2580-498-1
SUPPORT BELT KIT
REMOTE COMMANDER
1-489-485-11
REMOTE COMMANDER (RM-YD064)
KDL-32EX427/32EX527/40EX527/46EX527 52
SECTION 6 - DISASSEMBLY/PART NUMBER INFOR
MATION
WIRE DRESSING
FIGURE 6-1. KDL-32EX427/32EX527 OVERALL WIRE DRESSING
FIGURE 6-2. KDL-40EX527 OVERALL WIRE DRESSING
FIGURE 6-3. KDL-46EX527 OVERALL WIRE DRESSING
KDL-32EX427/32EX527/40EX527/46EX527 53
SECTION 7 - SERVICE ADJUSTMENTS
OVERVIEW
As mentioned in
“Section 2 - Software Requirements” on page 12
,
the models in this manual utilize a “generic” type main board,
therefore certain service adjustments settings must be changed or
confirmed when either the main Board, LCD Panel, or TCON Board
are replaced.
UPDATING THE SOFTWARE
After replacing the main Board, LCD Panel, or TCON Board, you
MUST UPDATE the SOFTWARE to the latest version. .
ACCESSING SERVICE ADJUSTMENT
MODE
1. TV must be in standby mode. (Power off).
2. Access Service Mode by pressing the following buttons
on the Remote Commander within a second of each
other:
DISPLAY
Channel 5
Volume +
POWER .
DISPLAY
RM-YD064
5
VOLUME+
POWER
KDL-32EX427/32EX527/40EX527/46EX527 54
SECTION 7 - SERVICE ADJUSTMENTS
3. The
DIGITAL Service Menu displays.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and VPC. If the DIGITAL Service Menu is not
displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:1D95E756
PM1.012W00LU
PID:10080000
PB1.000W00LU
PNL:LTY460HN0202
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
FIGURE 7-1. SAMPLE DIGITAL SERVICE MENU
press
or
JUMP
OPTIONS
CHASSIS
SERVICE
000
000
WYVERN
S2_NOISE_TH 32
FIGURE 7-2. SAMPLE CHASSIS SERVICE MENU
VIEWING OR CHANGING SERVICE DATA
Within each Service Menu are Categories and data information.
CHASSIS
SERVICE
000
000
WYVERN
S2_NOISE_TH 32
Data Value
Item Name
Category Number
Item Number
Category Name
FIGURE 7-3. SERVICE DATA DEFINITIONS
Use the buttons on the Remote Commander to review or change the
service data.
4. To change the Category, press
2
to move to the
Next Category or press
5
to go back to the Previous
Category.
Note: Pressing 2 or 5 only changes the Categories within
the Service Menu displayed.
5. To change the adjustment item, press
1
to move to
the Next Item or
4
to go back to the Previous Item.
6. To change the Data Value, press
3
to increase the
Data Value or
6
to decrease the Data Value.
7. Press
MUTING
then press
0
to WRITE (Save) the
changes.
8. To exit service mode, press
HOME
or turn the TV
power off.
Click on the first or last page to see other KDL-32EX427 / KDL-32EX527 / KDL-40EX527 / KDL-46EX527 service manuals if exist.