Sony KDL-32EX425 / KDL-46EX525 Service Manual ▷ View online
KDL-32EX425/46EX525
51
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
C Release clips and disconnect 1 connector from HLR2 Board to detach from LED Guide
BEZEL, PANEL BRACKETS AND LCD PANEL REMOVAL
The LCD Panel is securely attached to the Bezel using double-sided tape.
(Refer to
(Refer to
“Appendix C - Replacing the LCD Panel” on page C-1
.)
A Lift up 2 Panel Bracket (H) from top side to detach from Bezel
B Lift up Panel Bracket (C) from right and left side to detach from Bezel
3 from KDL-32EX425 Only
6 from KDL-46EX525Only
C Gently lift-up LCD Panel to detach from Bezel (Refer to
“Appendix C - Replacing the LCD Panel” on page C-1
.)
253
4-256-392-11
BRACKET, PANEL (H)
254
4-256-391-11
BRACKET, PANEL (C)
251
4-266-726-01
BEZEL(32 SYR)
(KDL-32EX425 ONLY)
251
4-266-697-42
BEZEL (46 SYR)
(KDL-46EX525 ONLY)
252
NA
LCD PANEL
FOR ALL LCD PANEL AND T-CON BOARD
PART NUMBER INFORMATION REFER TO THE
LCD PANELS SERVICE MANUAL
CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
254
253
252
251
253
A
B
C
B
KDL-32EX425/46EX525
52
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
SCREW LEGEND
KDL-46EX525 ONLY
*
301
1-910-801-03
CONNECTOR ASSEMBLY 28P
* 302
1-838-833-11
(LVDS) FLEXIBLE FLAT CABLE I1 32WS
*
303
1-910-801-07
HARNESS ASSEMBLY
CONNECTORS
KDL-32EX425 ONLY
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
4-256-393-01
SCREW, +PSW M3X6 W12
RC(5), AC CVR(1)
6
☆
4-259-541-01
USER SCREW ST
NOT IN THIS MODEL
0
■
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
TERMINAL AREA(1)
1
□
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
RC(7)
7
◆
4-257-907-01
JOINT, STAND
RC(2)
2
◇
4-268-126-02
SCREW, ORNAMENTAL M6X12
RC(2)
2
●
2-990-421-41
SCREW (+PSW) (M3X6)
GE2A(5), BATV(5)
10
▼
7-685-646-79
SCREW, +BVTP 3X8 TYPE2 IT-3
HMS3(1)
1
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
4-256-393-01
SCREW, +PSW M3X6 W12
RC(6), AC CVR(1)
7
☆
4-259-541-01
USER SCREW ST
STAND HEAD to NECK(2), NECK to STAND BASE(2)
4
■
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
TERMINAL AREA(1)
1
□
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
RC(5)
5
◆
4-257-907-01
JOINT, STAND
RC(2)
2
◇
4-268-126-02
SCREW, ORNAMENTAL M6X12
RC(2)
2
●
2-990-421-41
SCREW (+PSW) (M3X6)
GE3A(5), BATV(5)
8
▼
7-685-646-79
SCREW, +BVTP 3X8 TYPE2 IT-3
HMS3(1)
1
KDL-32EX425
KDL-46EX525
301
303
302
351
352
353
*
351
1-910-801-67
CONNECTOR ASSEMBLY 28P
* 352
1-838-880-11
(LVDS) FFC WITH CONNECTOR I1 46S
*
353
1-910-801-73
HARNESS ASSEMBLY
KDL-32EX425/46EX525
53
SECTION 6 - DISASSEMBLY/PART NUMBER INFOR
MATION
ACCESSORIES AND PACKAGING
4-273-015-31
MANUAL, INSTRUCTION
4-191-241-01 FLYER
*
4-271-055-11
SUPPLEMENT(STAND INSTALLATION)
(KDL-32EX425 ONLY)
MISCELLANEOUS
A-1811-852-A
BAG, SCREW ASSEMBLY(L)
(KDL-46EX525 ONLY)
A-1811-855-A
BAG, SCREW ASSEMBLY(PM)
(KDL-32EX425 ONLY)
4-262-708-01
CLAMPER, CABLE
4-272-200-01
DOUBLE SIDED TAPE (PANEL)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-188-302-11
HEX WRENCH
(KDL-46EX525 ONLY)
2-580-608-01
SCREW, +PSW M5X16
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-100-136-01
SHEET (CORE), C
(KDL-46EX525 ONLY)
4-256-443-01
SHEET, RADIATION (BAT-L/V)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-279-121-11
SPACER (GA) +C
X-2549-230-1
SUPPORT BELT KIT
7-600-031-96
TAPE (3M 1350FW-1)15MMX66M WHT
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
4-259-541-01
USER SCREW ST
(SCREWS TO ATTACH HEAD STAND AND BASE STAND TO NECK)
REMOTE COMMANDER
1-489-485-21
REMOTE COMMANDER (RM-YD064)
KDL-32EX425/46EX525
54
SECTION 6 - DISASSEMBLY/PART NUMBER INFOR
MATION
WIRE DRESSING
FIGURE 6-1. KDL-32EX425 OVERALL WIRE DRESSING
FIGURE 6-2. KDL-46EX525 OVERALL WIRE DRESSING
Click on the first or last page to see other KDL-32EX425 / KDL-46EX525 service manuals if exist.