Sony KDL-32EX340 / KDL-42EX440 Service Manual ▷ View online
KDL-32EX340/42EX440 33
SECTION 5 - UPDATES AND ADJUSTMENTS
Back
<<
Color Temp
<[
Neutral
]>
R Gain
<[
538
]>
G Gain
<[
512
]>
B Gain
<[
452
]>
R Offset
<[
512
]>
G Offset
<[
512
]>
B Offset
<[
512
]>
Recall Data
<[
Off
]>
Data Backup
<[
Off
]>
[</>]Set [EXIT] Exit
Factory Mode
Color Temperature
5. Press or to select the
Color Temp type.
(Cool, Neutral, Warm1 or Warm2).
6. After the correct Color Temperature is selected, press to
select the temperature type that needs to be modified.
7. After the correct temperature type is selected, press to
increase the data value or press to decrease the data
value.
8. Complete the data value adjustments to the remaining
temperature items within the selected temperature type.
NOTE: Changes to the data value must be saved within the
temperature type selected before making changes to one of
the other temperature types.
9. To save the changes, press to select
Data Backup.
Back
<<
Color Temp
<[
Neutral
]>
R Gain
<[
538
]>
G Gain
<[
512
]>
B Gain
<[
452
]>
R Offset
<[
512
]>
G Offset
<[
512
]>
B Offset
<[
512
]>
Recall Data
<[
Off
]>
Data Backup
<[
W/B
]>
[</>]Set [EXIT] Exit
Factory Mode
Color Temperature
10. Press to select the option
W/B and then press
.
11. Do one of the following:
a. To make changes to one of the other temperature types,
repeat steps 5 through 10.
b. To exit
Factory Mode, press
HOME
.
KDL-32EX340/42EX440 34
Sony Corporation
Sony LCSC
Technical Services
Service Publication Department
9-883-495-01
English
2012HJ74WEB-1
© 2012.8
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
KDL-32EX340/42EX440 A-1
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations
provided in the applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
pursuant to the following:
1. In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3. Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced
2. Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3. Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced
defective component MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed to be defective:
a. and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED
to Sony.
b. and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.
6. If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a in the service manual MUST BE DESTROYED.
KDL-32EX340/42EX440 A-1
APPENDIX A: ENCRYPTION KEY COMPONENTS
Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations
provided in the applicable agreement with Sony Corporation (and/or its subsidiary).
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced
pursuant to the following:
1. In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a .
2. Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3. Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced
2. Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.
3. Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.
4. Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced
defective component MUST BE DESTROYED. Boards cannot be swapped.
5. If a Circuit Board identified with a red outline and a in the service manual is deemed to be defective:
a. and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED
to Sony.
b. and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.
6. If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a in the service manual MUST BE DESTROYED.
