Sony KDL-32CX520 / KDL-32CX521 / KDL-32CX523 / KDL-32CX525 / KDL-40CX520 / KDL-40CX521 / KDL-40CX523 / KDL-40CX525 / KDL-46CX520 / KDL-46CX525 Service Manual ▷ View online
KDL-32/40/46CX520,521,523,525(AEP/UK/RUSS)
29
DIGITAL(DIG_SRV_MODE) SERVICE
TEST_PATTERN
*1 Video
2 Audio
DIGITAL
SERVICE
003 DIG_SRV_MODE
000 TEST_PATTERN
000 TEST_PATTERN
‐‐‐
DIGITAL
SERVICE
004 TUNER
000 !A_NOSIG_DET
000 !A_NOSIG_DET
001
ADJUSTMENT
CHANGE DATA
Note: “Digital” service mode don’t have to Save. (
except
“002 MODEL” and “005 CHAPRESET” category)
1) Change Data of “Digital” service mode. (
except
“003 DIG_SRV_MODE” category)
a. Press “2 / 5” on remote to select (up / down) category.
b. Press “1 / 4” on remote to select (up / down) Item.
c. Press “0 / 10” on remote to select item.
2) Change Data of “Digital” service mode. (
“003 DIG_SRV_MODE”
category)
“003 DIG_SRV_MODE” is one category of “Digital” service mode.
Please note because this operation is special.
a. Press “2 / 5” on remote to select “003 DIG_SRV_MODE”.
b. Press “1 / 4” on remote to select (up / down) Item.
c. Press “0 / 10” on remote to select item.
d. Press number key “1”~”9” directly. “*” stamp move.
e. Press “12 / enter / select” to decide and advance next step. Press “return”, when returning on the
previous page.
KDL-32/40/46CX520,521,523,525(AEP/UK/RUSS)
30
ADJUSTMENT
3) Write data for “Digital” service mode. (
“002 MODEL”
category)
Note: This procedure operation, when replaced the B board.
Note: Do not write a wrong segment or destination information in Product ID.
When the wrong setting is written, TV may not operate.
000 SEG -----------------Select JDM code information
001 DEST ---------------Select destination information
002 MODELNAME ---Select model name
004 SERIAL ------------ Can be set only once for the new board
a. Change data for each model.
b. Press “Mute”, “0” on remote sequentially.
It shows red “
WRITE
”. It indicate writing is processing.
c. After a while. Red “WRITE” disappears. Writing process is done after a while.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
I‐1
Write
KDL-32/40/46CX520,521,523,525(AEP/UK/RUSS)
31
ADJUSTMENT
SET TO SHIPPING CONDITION
How to do shipping condition.
a. Move to “Digital” service mode.
Press “8” on remote.
It shows green “
SERVICE
” changes to green “
RST-
”.
Press “mute” on remote.
Added green “
EXE
” after green “
RST-
” .
d. Press “0” on remote. Green “
EXE-RST
” changes to red “
EXE-RST
”. It indicate writing is processing.
After a while, red “
EXE-RST
” changes to green “
SERVICE
”.
And all LED lights.
Writing process is done at this point.
<Another way>
You can set to shipping condition w/o entering Service Mode.
-> “Cursor Up” on remote + “Power Key” on Front panel.
TIMER
Standby
POWER
KDL-32/40/46CX520,521,523,525(AEP/UK/RUSS)
32
SEC 3. TROUBLE SHOOTING
3-1. TRIAGE CHART
Note: Power board is different in name every inch. Therefore this section displays difference point in "*".
Green LED
Blinking
No
Pow er
Remote
Netw ork
Audio
Skype
2
3
5
6
7
Green LED
non-s top
Blinking
No Green
Power LED
(Dead Set)
Stationary
colored lines
or dots
No video
one of Inputs
No video
all Inputs
No
Rem ote
Wireles s
can't
connect
No Audio
Skype
Can't Work
BATV BOARD
G* BOARD
HLR2 BOARD
SPEAKER
Skype MODULE
W IFI MODULE
LVDS CABLE
T-CON
LCD PANEL
Problem
POWER
POWER
AUDIO
PANEL
(TCON)
PANEL
(INVERTER)
TEMP
: doubtful part
: Few pos s ibility
Reference
Video - missing or distorted
Symptoms - Shutdow n. Pow er LED
blinking red diagnostics sequences
Click on the first or last page to see other KDL-32CX520 / KDL-32CX521 / KDL-32CX523 / KDL-32CX525 / KDL-40CX520 / KDL-40CX521 / KDL-40CX523 / KDL-40CX525 / KDL-46CX520 / KDL-46CX525 service manuals if exist.