DOWNLOAD Sony KDL-32BX355 / KDL-40BX455 / KDL-46BX455 Service Manual ↓ Size: 3.5 MB | Pages: 50 in PDF or view online for FREE

Model
KDL-32BX355 KDL-40BX455 KDL-46BX455
Pages
50
Size
3.5 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdl-32bx355-kdl-40bx455-kdl-46bx455.pdf
Date

Sony KDL-32BX355 / KDL-40BX455 / KDL-46BX455 Service Manual ▷ View online

KDL-32BX355/40BX455/46BX455 13
SECTION 3 - FLOW CHARTS AND DIAGRAMS
STANDBY LED BLINKING
Protect
Shutdown.
Standby LED 
Blinking
No
Yes
No
Yes
2X
3X
5X
No
Yes
LCD Panel*
6X
Yes
7X
No
Immediately
After a While
Check room 
temperature and 
ventilation around 
unit
Power Supply 
Board*
Main Board*
“SONY” logo 
appears before 
shutdown?
Yes
No
LCD Panel*
Power Supply 
Board*
Main Board*
PROTECTION SHUTDOWN FLOWCHART
*For Part Number information, refer to 
“Section 4 - Disassembly/Part Number Information” on page 16
.
KDL-32BX355/40BX455/46BX455 14
SECTION 3 - FLOW CHARTS AND DIAGRAMS
NO VIDEO
No Video
Backlights 
turned on?
Unplug LVDS 
connector at 
TCON while unit 
is running. This 
may need to be 
done more than 
once
Any flashes 
seen on 
screen?
Yes
No
Any OSD 
graphics 
present?
No
Main Board*
No
Inverter Board 
or LCD Panel*
Yes
Yes
Main Board*
LCD Panel*
NO VIDEO FLOWCHART
*For Part Number information, refer to 
“Section 4 - Disassembly/Part Number Information” on page 16
.
KDL-32BX355/40BX455/46BX455 15
SECTION 3 - FLOW CHARTS AND DIAGRAMS
Video Distortion
Is distortion 
across entire 
screen?
Any horizontal 
lines?
No
No
Yes
Yes
Improper of 
missing colors?
Yes
Main Board*
No
Vertical lines
or bars?
No
Yes
Lines move 
when wide-mode 
changed?
Yes
No
LCD Panel*
Main Board*
LCD Panel*
Any single or 
isolated vertical 
lines?
Yes
LCD Panel*
More than 1 
vertical band?
No
Yes
LCD Panel*
VIDEO DISTORTION FLOWCHART
*For Part Number information, refer to 
“Section 4 - Disassembly/Part Number Information” on page 16
.
KDL-32BX355/40BX455/46BX455  
16
Components  not  identified  by  a  part  number  or 
description are not stocked because they are seldom 
required for routine service.
The component parts of an assembly are indicated by the 
reference numbers in the far right column of the parts list 
and within the dotted lines of the diagram.
Items marked with an asterisk are not stocked since 
they are seldom required for routine service.  Expect 
some delay when ordering  these components.
NOTE: The components identified by shading 
and 
!
 mark are critical for safety. Replace only 
with part number specified. 
NOTE: The components identified by a red outline and a   mark contain 
confidential information. Specific instructions must be adhered to whenever 
these components are repaired and/or replaced. 
See Appendix A: Encryption Key Components in the back of this manual. 
SECTION 4 - DISASSEMBLY/PART NUMBER INFORMATION
TABLE-TOP STAND AND REAR COVER REMOVAL
A   Gently place TV face down onto a soft cloth and remove 3 screws from Table-Top Stand.
 
 
REF. NO.  
PART NO. 
DESCRIPTION 
[ASSEMBLY INCLUDES]
 
REF. NO.  
PART NO. 
DESCRIPTION 
[ASSEMBLY INCLUDES]
 
4-423-357-01 
REAR COVER (32APOT)  
[2]
 
 
 
(KDL-32BX355 ONLY)
 
4-423-358-01 
REAR COVER (40APOT)  
[2]
 
 
 
(KDL-40BX455 SN# 8500001 - 8970000 ONLY)
 
4-423-358-02 
REAR COVER (40APOT)  
[2]
 
 
 
(KDL-40BX455 SN# 8970001 - 9000000 ONLY)
 
4-423-359-01 
REAR COVER (46APOT)  
[2]
 
 
 
(KDL-46BX455 ONLY)
 
 
4-410-252-01 
BRACKET, VESA (APOT)
 
X-2584-208-1 
STAND ASSEMBLY (32APOT)
 
 
 
(KDL-32BX355 ONLY)
 
X-2584-209-1 
STAND ASSEMBLY (40APOT)
 
 
 
(KDL-40BX455 ONLY)
 
X-2584-210-1 
STAND ASSEMBLY (46APOT)
 
 
 
(KDL-46BX455 ONLY)
 
 
 
2-580-608-01 
SCREW, +PSW M5X16
 
 
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV) 
  
For product protection and safety reasons, Sony strongly recommends  
 
 
that you use the screws provided with the TV. 
 
 
CAUTION: These screws cannot be used to secure the TV to the Wall 
  
 
Mount Brackets.
 
 
2-580-640-01 
SCREW, +BVTP2 4X16
 
 
2-580-592-01 
SCREW, +PSW M3X8
 
 
4-159-298-01 
SCREW, +PSW M4X10
3
2
1
B   Remove screws from Rear Cover.
 
15 from KDL-32BX355 Only
 
17 from KDL-40BX455 Only
 
19 from KDL-46BX455 Only
 
CAUTION: Do not damage the Power 
Board Connector and AC Power Cord when 
removing the Rear Cover. 
 
C   Carefully lift Rear Cover from bottom side and push 
forward to release top hooks.
 
D   Hold Power Supply Cord while lifting up 
Rear Cover, then pass Power Supply Cord 
through Rear Cover opening.
 
Do not pull the AC Power Cord or damage
the connector on the Power Board.
Page of 50
Display

Click on the first or last page to see other KDL-32BX355 / KDL-40BX455 / KDL-46BX455 service manuals if exist.