Sony KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 Service Manual ▷ View online
97
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-46S3000 ONLY
Attach ESD Grounding wire as shown
shown.
NOTE: 3x8mm Screws are located.
3mm TORQUE: 6.0kg.cm (+-1.0kg.cm)
OPERATION PROCESS
TORQUE SPECIFICATION
Install
3x8mm
screw to GND Tab
on R VESA Bracket(LEFT SIDE).
NOTE: This screw can be applied
off-line as
NOTE: This screw can be applied
off-line as
pre-assembly
operation.
Install Faston Tab on G3-Bd
(CN6003).
(CN6003).
2
1
CAUTION:
DRESS GND. WIRE AWAY FROM HEAT SINK
SHARP EDGE.
SHARP EDGE.
VESA BRACKER GROUND WIRE
98
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
2-1. USING THE REMOTE COMMANDER
FOR ELECTRICAL ADJUSTMENTS
To adjust various set features, use the Remote Commander to put the
set into service mode to display the service menus and categories.
set into service mode to display the service menus and categories.
Equipment Needed:
Pattern Generator (with component outputs)
Oscilloscope
Digital multimeter
2-2. ACCESSING SERVICE ADJUSTMENT
MODE
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
POWER
Onscreen cursor
and select button
and select button
DISPLAY
RM-YD018
5
VOLUME+
The fi rst service menu (TV) displays.
SECTION 2: SERVICE ADJUSTMENTS
2-3. VIEWING THE SERVICE MENUS
Use the Remote Commander to view the BE and Digital service menus
options.
options.
1. To display the Service Menu that contains the Category you want to
adjust, press JUMP on the Remote Commander.
(For a complete list of the service Categories refer to Service Menus)
(For a complete list of the service Categories refer to Service Menus)
Press JUMP
Press JUMP
TV
001 COLOR
001 COLOR
ADJ
001 R_DRV
SERVICE
DIGITAL PROGRAM
DATA
BE PROGRAM
DATA
BE PROGRAM
NVM
PACK
BOOT
BOOT
: h07-00.79T DEV
: 000011
: TMO.620
: TDO.426
: TPA.014
: TBO.506
: 000011
: TMO.620
: TDO.426
: TPA.014
: TBO.506
00100
QM 0
0
SERVICE
INFO
DTV
BE
DIGITAL
Sample TV Service Menu
99
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
2-4. USING THE REMOTE COMMANDER TO
VIEW SERVICE DATA
Use the buttons on the Remote Commander to access the service menu
items and adjust the data values.
items and adjust the data values.
Data Value
Category
Number
Number
Adjustment
Item Number
Item Number
Category
Adjustment
Item
Item
TV
SERVICE
001 COLOR ADJ
001 R_DRV
001 R_DRV
DIGITAL PROGRAM: h07-00.79T DEV
DATA
NVM
PACK
BOOT
PACK
BOOT
BE PROGRAM
00100
: 0000011
: TMO.620
: TDO.426
: TPA.014
: TBO.506
: TMO.620
: TDO.426
: TPA.014
: TBO.506
Display
Next Category
Next Category
Display
Previous Item
Previous Item
Increase
Data Value
Data Value
Decrease
Data Value
Data Value
Display
Previous
Category
Previous
Category
Display
Next Item
Next Item
Displays
Service Menus
Service Menus
MUTING
JUMP
Saves data
Writes data
into memory
into memory
RM-YD018
Read data
9
0
5
6
3
1
2
4
1. Access Service Adjustment Mode and select the Service Menu that
contains the Category with the Adjustment Item you want to change.
2. To change the Category, press 2 or 5 on the Remote Commander.
Note: Pressing 2 or 5 only changes the categories within the
Service Menu displayed. To change a Category on one of the other
Service Menus, press the JUMP button until the correct Service
Menu is displayed.
Service Menu displayed. To change a Category on one of the other
Service Menus, press the JUMP button until the correct Service
Menu is displayed.
3. To change the Adjustment Item, press 1 or 4 on the Remote
Commander.
2-4-1. CHANGING SERVICE DATA
The service data values have been selected to provide the best
possible viewing performance. Although some of the data values
are adjustable, the adjustments are very sensative and changing
them may reduce the picture quality of the set. The following
instructions are provided for informational purposes only.
possible viewing performance. Although some of the data values
are adjustable, the adjustments are very sensative and changing
them may reduce the picture quality of the set. The following
instructions are provided for informational purposes only.
4. To change the Data Value, press 3 or 6 on the Remote
Commander.
5. To save the changes, press MUTING then 0 to write into memory.
2-4-2. EXITING SERVICE MODE
After completing the changes, exit service mode.
6. To exit service mode, turn the power off by pressing POWER .
SERVICE MENUS
BE MICRO
001
COLOR ADJ
001
R_DRV
002
G_DRV
003
B_DRV
004
R_BKG
005
G_BKG
006
B_BKG
002
SETTING
001
AGING MODE
002
A-SHUTOFF DISABLE
003
NO SYNC MUTE
003
INFORM
001
SET INFO RESET
DIGITAL MICRO
QM
0
INFO
1
PATN
2
GPTN
QT
0
CVSB
100
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
2-5. VERIFYING SERVICE DATA
CHANGES
1. After completing all adjustments turn the set off with the Remote
Commander and then proceed to the next step.
2. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
5
Volume
+
POWER .
3. To verify the changes repeat steps 1 through 3 of 2-4. Using the
Remote Commander to View Service Data.
4. To exit service mode, turn the power off by pressing POWER .
2-6. RESETTING TO FACTORY DEFAULTS
Use the following instructions to restore the User Controls and
Channel Memory settings to the preset factory conditions.
Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander, press
the POWER button on the Front Panel of the set.
The set restarts and displays the initial setup screen. This may
take several minutes.
take several minutes.
Click on the first or last page to see other KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 service manuals if exist.