DOWNLOAD Sony KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 Service Manual ↓ Size: 32.65 MB | Pages: 127 in PDF or view online for FREE

Model
KDL-26S3000 KDL-32S3000 KDL-40S3000 KDL-46S3000
Pages
127
Size
32.65 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdl-26s3000-kdl-32s3000-kdl-40s3000-kdl-46s3000.pdf
Date
PREV: Sony KV-21FA350 (serv.man2) Service Manual

Sony KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 Service Manual ▷ View online

 89 
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-46S3000 ONLY
1. Wire Dress Speaker Cables as shown.
Lft. Speaker cable is dressed in side
clamp (white plastic).
2. BOTH R/L cables are dressed in FGC-3
conductive clip.
TORQUE SPECIFICATION
TORQUE: 6kg.cm (+-1.0kg.cm)
OPERATION  PROCESS
1
2
Lft. SPEAKER Cables
RIGHT SPEAKER Cables
D2 BOARD AND INVERTER BOARD CAUTION
 90 
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-46S3000 ONLY
1. Dress LEFT speaker harness as shown
2. Install Sheet Core C to hold BOTH U1
Gnd Wire AND Lft. Speaker wires to
panel.
OPERATION  PROCESS
1
2
PUSH SIDE CLAMP THIS DIRECTION TO LOCK!!
2
Side Clamp Installed by SBC PLANT!
Side Clamp Installed by Vendor.
2
2
3
SPEAKER CABLES
 91 
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-46S3000 ONLY
DO NOT allow LFT. Speaker wire (white)
to cross over magnet on speaker.
Keep white wire CLEAR of magnet.
OPERATION  PROCESS
1
N.G.
Spkr. Wire CROSS Magnet.
1
O.K.
Spkr. Wire NO CROSS Magnet.
LEFT SPEAKER HARNESS
 92 
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-46S3000 ONLY
Apply Sheet Core C to Panel.
Use "Score Line" to center Tape.
Use Bottom of "Dimple" to align bottom of
tape.
Make sure DTT Shield has Sheet Core C
(Installed by Vendor)
Wire Dress 20P Harness as shown.
Put attention on DIRECTION of wires from
BU-Bd inside side clamp on DTT Shield!
OPERATION  PROCESS
2
Check Sheet Core C is installed along edge of DTT shield
and start of straight edge of DTT shield.
[INSTALLED BY VENDOR]
2
1
Align Sheet Core C with "Score Line"
on Panel (center on line).
Align Bottom ot tape with "dimple" on
panel.
3/4/2007 LATE CHANGE:
ADD
3x12mm Screw in this hole!
U1 BOARD
Page of 127
Display

Click on the first or last page to see other KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 service manuals if exist.

RANDOM: