Sony KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 Service Manual ▷ View online
25
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000 ONLY
OPERATION PROCESS
1. Install H4-Bd. Be careful to align Plastic
clip at bottom of bezel with notch in PWB.
2. Use LCD Tape to hold H4-Bd wires to edge
of the RIGHT Speaker.
1
2
1
H4 BOARD
26
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000 ONLY
Install/Wire Dress Harnesses as shown.
CAUTION: Make sure INVERTER CONN.
is Fully LOCKED!!
OPERATION PROCESS
2
2
CAUTION:
Make Sure Inverter Connector is Fully LOCKED!
1
INVERTER CONNECTOR
27
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000 ONLY
Wire Dress Right Speaker wires and H4
cables in G3-Bd clips (green arrows).
NOTE: Rt. Spkr. Wires are dressed
ONLY in far right clip on G-Bracket
Apply LCD Tape to Corner of G-Bracket
to keep wires from touching sharp edge of
Lower LCD Bracket.
OPERATION PROCESS
NOTE: Plastic G-Bracket has one piece of LCD Tape
to hold wires close to bracket.
Sharp Edge of Lower LCD Bracket can cut insulation.
to hold wires close to bracket.
Sharp Edge of Lower LCD Bracket can cut insulation.
2
1
3
H4 BOARD AND RIGHT SPEAKER
28
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000 ONLY
Route/Dress Harnesses connected to
Core Block as Shown
NOTE Order & Direction of Cables in
plastic Clip on Shield Case.
OPERATION PROCESS
1
3
2
2
Keep Cables BELOW level
of Shield Case (Pinch Points)
of Shield Case (Pinch Points)
NOTE order and direction of cables!
CORE BLOCK HARNESS
Click on the first or last page to see other KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 service manuals if exist.