• Service Manuals |
  • Sony |
  • TV |
  • KDL-26S2000, KDL-26S2010, KDL-26S2020, KDL-26S2030, KDL-32S2000, KDL-32S2010, KDL-32S2020, KDL-32S2030, KDL-40S2000, KDL-40S2010, KDL-40S2030, KDL-46S2000, KDL-46S2010, KDL-46S2030

DOWNLOAD Sony KDL-26S2000 / KDL-26S2010 / KDL-26S2020 / KDL-26S2030 / KDL-32S2000 / KDL-32S2010 / KDL-32S2020 / KDL-32S2030 / KDL-40S2000 / KDL-40S2010 / KDL-40S2030 / KDL-46S2000 / KDL-46S2010 / KDL-46S2030 Service Manual ↓ Size: 10.52 MB | Pages: 101 in PDF or view online for FREE

Model
KDL-26S2000 KDL-26S2010 KDL-26S2020 KDL-26S2030 KDL-32S2000 KDL-32S2010 KDL-32S2020 KDL-32S2030 KDL-40S2000 KDL-40S2010 KDL-40S2030 KDL-46S2000 KDL-46S2010 KDL-46S2030
Pages
101
Size
10.52 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdl-26s2000-kdl-26s2010-kdl-26s2020-kdl-26s2030-kd.pdf
Date
PREV: Sony KDF-E42A11E / KDF-E50A11E Service Manual

Sony KDL-26S2000 / KDL-26S2010 / KDL-26S2020 / KDL-26S2030 / KDL-32S2000 / KDL-32S2010 / KDL-32S2020 / KDL-32S2030 / KDL-40S2000 / KDL-40S2010 / KDL-40S2030 / KDL-46S2000 / KDL-46S2010 / KDL-46S2030 Service Manual ▷ View online

- 25 -
WAX2
RM-ED005
AD-Adjust RF Spec
Spec.
Reference register name
S-REG: APL_LUMA
TARGET_Y_RF±2
Service adjustments to this model can be performed using the
supplied remote Commander RM-ED005.
3.
The following menu will then appear on the screen.
4.
Move to the relevant command using the up or down arrow
buttons on the remote commander.
5.
Press the right arrow button to enter into the required menu item.
6.
Press the ‘Menu’ button on the remote commander to quit the
Service Mode when all adjustments have been completed.
Note :
•
After carrying out the service adjustments, to prevent the
customer accessing the ‘Service Menu’ switch the TV set OFF
and then ON.
1.
Turn on the power to the TV set and enter into the stand-by
mode.
2.
Press the following sequence of buttons on the Remote
Commander.
SECTION 3 
 SET-UP ADJUSTMENTS
3-1. How to enter Service Mode
i+
5
+
(ON SCREEN                            (DIGIT 5)                                (VOLUME +)                                  (TV)
   DISPLAY)
I/
TV
3-2-2. Y signal calibration1 adjustment for
  terrestrial analog.
1. Input PAL colour bar 75%Y, 75%C via terrestrial input.
2. Send ECS_ADJUST_TCD3_CONT_RF command.
3. Read the value of S-REG:APL_LUMA via ECS. Confirming that
the value is within spec of the table below.
3-2-3. Set up of C signal calibration1 adjustment
for terrestrial analog.
1. Input PAL colour bar 75%Y, 75%C via terrestrial input.
2. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
3. Ensure noise reduction NR=3 (High), GAMMA_EN=0,
P4_CVD2_85=0.
3-2-1. Set up of AD calibration1 adjustment for
terrestrial analog.
The following adjustments are done via ECS.
1. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
2. Ensure noise reduction NR=3 (High), GAMMA_EN=0,
P4_CVD2_85=0.
3. Set the following registration items.
3-2. Signal Level Adjustment
Screen Size
26"
32"
40"
46"
TARGET_Y_RF(PAL)
165
165
165
165
ADJ_COLOR_Y_ATT(PAL)
128
128
128
128
ADJ_COLOR_PAL(PAL)
3
3
3
3
㧜
 㧞 㧟
㧠 㧡 㧢 㧣
6+6.'
5KIPCNNGXGNCFLWUVOGPV
65/
- 26 -
WAX2
RM-ED005
3-2-4. C signal calibration1 adjustment for
terrestrial analog.
1. Send ECS_ADJUST_TCD3_HUE_RF command.
2. Read S-REG: READ_BACK_B00 via ECS. (READ_AREA=0).
3. Read S-REG: READ_BACK_B01 via ECS. (READ_AREA=6).
4. Confirm that 8 bits of MSB of item number 2) and 3) are within
spec of the table below.
m
e
t
I
e
c
n
e
r
e
f
e
R
.
c
e
p
S
e
u
l
a
v
e
c
n
e
r
e
f
f
i
d
*
0
B
_
K
C
A
B
_
D
A
E
R
2
±
3-2-5. Set up of AD calibration1 adjustment for
v i d e o .
1. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
2. Ensure noise reduction NR=1 (Low), GAMMA_EN=0,
P4_CVD2_85=0.
3. Set the following registration items.
3-2-6. Y signal calibration1 adjustment for video.
1. Input PAL colour bar 75%Y, 75%C via AV1 input.
2. Send ECS_ADJUST_TCD3_CONT_V command.
3. Read the value of S-REG:APL_LUMA via ECS. Confirming that
the value is within spec of the table below.
Screen Size
26"
32"
40"
46"
TARGET_Y_V(PAL)
165
165
165
165
ADJ_COLOR_Y_ATT(PAL)
128
128
128
128
ADJ_COLOR_PAL(PAL)
3
3
3
3
㧜
 㧞 㧟
㧠 㧡 㧢 㧣
㧠 㧡 㧢 㧣
6+6.'
5KIPCNNGXGNCFLWUVOGPV
65/
AD-Adjust Video Spec
Spec.
Reference register name
S-REG: APL_LUMA
TARGET_Y_V±2
5. Switch the TV set OFF and then ON again to retain adjustment
values.
3-2-7. Set up of C signal calibration1 adjustment
  for video.
1. Input PAL colour bar 75%Y, 75%C via AV1 input.
2. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
3. Ensure noise reduction NR=1 (Low), GAMMA_EN=0,
P4_CVD2_85=0.
4. Set the following registration items.
Screen Size
26"
32"
40"
46"
ADJ_COLOR_Y_ATT(PAL)
128
128
128
128
ADJ_COLOR_PAL(PAL)
3
3
3
3
3-2-8.  C signal calibration1 adjustment for video.
1. Send ECS_ADJUST_TCD3_HUE_V command.
2. Read S-REG: READ_BACK_B00 via ECS. (READ_AREA=0).
3. Read S-REG: READ_BACK_B01 via ECS. (READ_AREA=6).
4. Confirm that 8 bits of MSB of item number 2) and 3) are within
spec of the table below.
m
e
t
I
e
c
n
e
r
e
f
e
R
.
c
e
p
S
e
u
l
a
v
e
c
n
e
r
e
f
f
i
d
*
0
B
_
K
C
A
B
_
D
A
E
R
2
±
5. Read S-REG: TCD3_SATURATION via ECS.
6. Switch the TV set OFF and then ON again to retain adjustment
values.
Screen Size
26"
32"
40"
46"
TARGET_Y_V(SECAM)
165
165
165
165
ADJ_COLOR_Y_ATT(SECAM)
128
128
128
128
ADJ_COLOR_PAL(SECAM)
2
2
2
2
3-2-9. Set up of AD calibration2 adjustment for
v i d e o .
1. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
2. Ensure noise reduction NR=1 (Low), GAMMA_EN=0,
P4_CVD2_85=0.
3. Set the following registration items.
㧜
 㧞 㧟
㧠 㧡 㧢 㧣
6+6.'
5KIPCNNGXGNCFLWUVOGPV
65/
3-2-10.
Y signal calibration2 adjustment for video.
1. Input SECAM colour bar 75%Y, 75%C via AV1 input.
- 27 -
WAX2
RM-ED005
1. Ensure TEST_PATTEN_ON=1.
2. Ensure TEST_G_LEVEL=204.
3. Ensure TEST_R_LEVEL=0.
4. Ensure TEST_B_LEVEL=0.
5. Measure brightness A.
6. Ensure TEST_G_LEVEL=102.
7. Ensure TEST_R_LEVEL=0.
8. Ensure TEST_B_LEVEL=0.
9. Measure brightness B.
10. Set up G_GAMMA_OFST_01=brightness B/brightness
A*10000. The result is written to G_GAMMA_OFST_01.
11. Send Gamma_Tbl_Search_1 command.
12. Ensure TEST_G_LEVEL=153.
3-3-2. Set up Trident internal SG and brightness
           measurement
13. Ensure TEST_R_LEVEL=0.
14. Ensure TEST_B_LEVEL=0.
15. Measure brightness C.
16. Set up G_GAMMA_OFST_02=brightness C/brightness
A*10000. The result is written to G_GAMMA_OFST_02.
17. Send Gamma_Tbl_Search_2 command.
18. Save set up value in NVM in register G_GAM_IDX_OFST.
20IRE
TEST_R_LEVEL
51
TEST_G_LEVEL
51
TEST_B_LEVEL
51
3-4. White Balance Adjustment
The following adjustments are done via ECS.
3-4-1. Set up mode for White Balance Adjustment
1. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
2. Ensure COL_MATRIX_INDEX=15.
3. Ensure hreg p1_d_p_26=0 and hreg p1_d_p_28=0.
4. Ensure DYNAMIC_EN=0.
3-4-2. White Balance of colour temperature “High”
1. Set up COLOR_TEMP=0.
2. Set up GAMMA_OFF=15.
3. R_GAMMA_OFST_01=128
R_GAMMA_OFST_02=128
R_GAMMA_OFST_03=128
R_GAMMA_OFST_04=128
B_GAMMA_OFST_01=128
B_GAMMA_OFST_02=128
B_GAMMA_OFST_03=128
Set up B_GAMMA_OFST_04=128.
4. Set up “Wait”.
5. Set up the correct values for 20IRE for TEST_R_LEVEL,
TEST_G_LEVEL and TEST_B_LEVEL.
2. Send ECS_ADJUST_TCD3_CONT_V command.
3. Read the value of S-REG:APL_LUMA via ECS. Confirming that
the value is within spec of the table below.
AD-Adjust Video Spec
Spec.
Reference register name
S-REG: APL_LUMA
TARGET_Y_V±2
3-2-11.  Set up of C signal calibration2 adjustment
    for video.
1. Input SECAM colour bar 75%Y, 75%C via AV1 input.
2. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
3. Ensure noise reduction NR=1 (Low), GAMMA_EN=0,
P4_CVD2_85=0.
4. Set the following registration items.
Screen Size
26"
32"
40"
46"
ADJ_COLOR_Y_ATT(SECAM)
128
128
128
128
ADJ_COLOR_PAL(SECAM)
2
2
2
2
3-2-12.  C signal calibration2 adjustment for video.
1. Send ECS_ADJUST_TCD3_HUE_V command.
2. Read S-REG: READ_BACK_B00 via ECS. (READ_AREA=0).
3. Read S-REG: READ_BACK_B01 via ECS. (READ_AREA=6).
4. Confirm that 8 bits of MSB of item number 2) and 3) are within
spec of the table below.
m
e
t
I
e
c
n
e
r
e
f
e
R
.
c
e
p
S
e
u
l
a
v
e
c
n
e
r
e
f
f
i
d
*
0
B
_
K
C
A
B
_
D
A
E
R
2
±
5. Read S-REG: TCD3_SATURATION via ECS.
6. Switch the TV set OFF and then ON again to retain adjustment
values.
3-3. Gamma Adjustment
The following adjustments are done via ECS.
Note: Before Gamma adjustment can begin the set needs 1 hour aging.
1. Send ECS_ADJUST_LEVEL_SETTING_INIT command.
2. Ensure COL_MATRIX_INDEX=15.
3. Ensure hreg p1_d_p_26=0 and hreg p1_d_p_28=0.
4. Ensure G_GAMMA_IDX_OFST=15.
5. Ensure DYNAMIC_EN=0.
3-3-1. Set up mode for Gamma Adjustment
- 28 -
WAX2
RM-ED005
          (*1) If adjustment results exceed the tolerance please extend
          the tolerance to 0.6JND.
80IRE
TEST_R_LEVEL
204
TEST_G_LEVEL
204
TEST_B_LEVEL
204
40IRE
TEST_R_LEVEL
102
TEST_G_LEVEL
102
TEST_B_LEVEL
102
X
Y
Tolerance
26"
20IRE
0.263
0.274
0.5JND(*1)
40IRE
0.268
0.273
0.5JND(*1)
60IRE
0.265
0.272
0.5JND(*1)
80IRE
0.265
0.272
0.5JND(*1)
32"
0.27
0.271
0.5JND
40"
0.272
0.272
0.5JND
46"
0.273
0.274
0.5JND
6. Adjust R_GAMMA_OFST_01 and B_GAMMA_OFST_01
chroma values so that they are within tolerance in the table below.
10. Adjust R_GAMMA_OFST_03 and B_GAMMA_OFST_03
chroma values so that they are within tolerance in the table below.
E
R
I
0
6
L
E
V
E
L
_
R
_
T
S
E
T
3
5
1
L
E
V
E
L
_
G
_
T
S
E
T
3
5
1
L
E
V
E
L
_
B
_
T
S
E
T
3
5
1
7. Set up the correct values for 40IRE for TEST_R_LEVEL,
TEST_G_LEVEL and TEST_B_LEVEL.
8. Adjust R_GAMMA_OFST_02 and B_GAMMA_OFST_02
chroma values so that they are within tolerance in the table below.
9. Set up the correct values for 60IRE for TEST_R_LEVEL,
TEST_G_LEVEL and TEST_B_LEVEL.
11. Set up the correct values for 80IRE for TEST_R_LEVEL,
TEST_G_LEVEL and TEST_B_LEVEL.
12. Adjust R_GAMMA_OFST_04 and B_GAMMA_OFST_04
chroma values so that they are within tolerance in the table below.
13. Write R_GAMMA_OFST_01~R_GAMMA_OFST_04 and
B_GAMMA_OFST_01~B_GAMMA_OFST_04 in the NVM.
14. Write R_GAMMA_OFST_04~R_GAMMA_OFST_05 and
B_GAMMA_OFST_04~B_GAMMA_OFST_05 in the NVM.
15. Set up TEST_PATTEN_ON=0.
16. Set up COL_MATRIX_INDEX=30.
17. Set up hreg_p1_d_p_26=3.
18. Set up hreg_p1_d_p_28=3.
19. Set up DYNAMIC_EN=0xffff
20. Set up COLOR_TEMP=1.
21. Write the correct values for R_DRV, B_DRV, R_BKG  and B_BKG
from the table below.
X
Y
Tolerance
26"
20IRE
0.263
0.274
0.5JND(*1)
40IRE
0.268
0.273
0.5JND(*1)
60IRE
0.265
0.272
0.5JND(*1)
80IRE
0.265
0.272
0.5JND(*1)
32"
0.27
0.271
0.5JND
40"
0.272
0.272
0.5JND
46"
0.273
0.274
0.5JND
X
Y
Tolerance
26"
20IRE
0.263
0.274
0.5JND(*1)
40IRE
0.268
0.273
0.5JND(*1)
60IRE
0.265
0.272
0.5JND(*1)
80IRE
0.265
0.272
0.5JND(*1)
32"
0.27
0.271
0.5JND
40"
0.272
0.272
0.5JND
46"
0.273
0.274
0.5JND
X
Y
Tolerance
26"
20IRE
0.263
0.274
0.5JND(*1)
40IRE
0.268
0.273
0.5JND(*1)
60IRE
0.265
0.272
0.5JND(*1)
80IRE
0.265
0.272
0.5JND(*1)
32"
0.27
0.271
0.5JND
40"
0.272
0.272
0.5JND
46"
0.273
0.274
0.5JND
          (*1) If adjustment results exceed the tolerance please extend
          the tolerance to 0.6JND.
          (*1) If adjustment results exceed the tolerance please extend
          the tolerance to 0.6JND.
          (*1) If adjustment results exceed the tolerance please extend
          the tolerance to 0.6JND.
Page of 101
Display

Click on the first or last page to see other KDL-26S2000 / KDL-26S2010 / KDL-26S2020 / KDL-26S2030 / KDL-32S2000 / KDL-32S2010 / KDL-32S2020 / KDL-32S2030 / KDL-40S2000 / KDL-40S2010 / KDL-40S2030 / KDL-46S2000 / KDL-46S2010 / KDL-46S2030 service manuals if exist.

RANDOM: