Sony KDL-26L5000 / KDL-32L5000 Service Manual ▷ View online
17
KDL-26L5000/32L5000
KDL-26L5000/32L5000
1 Disconnect LVDS connector from T-con
2 Remove 2 screws from bottom of panel and release LCD panel from Bezel
3 Disconnect 1 connector from Inverter Board
4 Disconnect 1 connector from H2 Board
5 Remove 1 screw from H2 Board
1-7. H2
BOARD
AND
LCD
PANEL
REMOVAL
1-7-1. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
5
2
3
4
1
LCD Panel
Bezel
H2 Board
18
KDL-26L5000/32L5000
KDL-26L5000/32L5000
1-8. BALANCER (MT INVERTER) BOARD REMOVAL (KDL-26L5000 ONLY)
1 Remove 6 screws from Board cover
2 Pull out the Board from Lamp socket
1
2
Cover
Balancer Board
LCD Panel
REMOVE SCREWS
SECURING SHIELD
SECURING SHIELD
INVERTER BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement. The example shown
is a 32” model but applies to all models.
BACKLIGHT
END VIEW
SOCKET
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
CONNECTOR AND
PULL BOARD TO
THE RIGHT
19
KDL-26L5000/32L5000
KDL-26L5000/32L5000
1 Remove 5 screws from Board cover
2 Pull out the Board from Lamp socket
1-9. BALANCER (MT INVERTER) BOARD REMOVAL (KDL-32L5000 ONLY)
1
2
Cover
Balancer Board
LCD Panel
REMOVE SCREWS
SECURING SHIELD
SECURING SHIELD
INVERTER BOARD REMOVAL
Only remove the screws securing the inverter
cover which may be metal or plastic. The
remaining plastic strip contains sockets for the
fluorescent backlights and should never be
loosened. The backlights will pop out of the
sockets and/or break the backlight requiring a
LCD panel replacement. The example shown
is a 32” model but applies to all models.
BACKLIGHT
END VIEW
SOCKET
REMOVE
CONNECTOR AND
PULL BOARD TO
THE RIGHT
CONNECTOR AND
PULL BOARD TO
THE RIGHT
REMOVE SCREWS
SECURING SHIELD
SECURING SHIELD
2
Plastic Strip
holding
Lamp Socket
holding
Lamp Socket
Inverter Board
DO NOT
REMOVE
BACKLIGHT
SCREWS
REMOVE
BACKLIGHT
SCREWS
20
KDL-26L5000/32L5000
KDL-26L5000/32L5000
WIRE DRESSING
OVERALL VIEW
KDL-26L5000
KDL-32L5000
INV
POWER UNIT
(G2BE)
(G2BE)
T-CON
H2
A
CN202
CN201
CN4201
CN402
CN802 CN801
CN4202
CN6201
CN6202
CN6101
CN9100
SWITCH
UNIT
UNIT
SP
SP
Click on the first or last page to see other KDL-26L5000 / KDL-32L5000 service manuals if exist.