Sony KDL-22EX308 / KDL-32EX308 Service Manual ▷ View online
KDL-22EX308/32EX308
24
SERVICE ADJUSTMENTS
16. Press
2
until the
004 TCON_CHANGED category displays.
PEM
SERVICE
004
000
TCON_CHANGED
DATA_TRANS_SET
0
17. For the
DATA_TRANS_SET item, press
3
to increase the
data value to 1.
PEM
SERVICE
004
000
TCON_CHANGED
DATA_TRANS_SET
1
Data Value
18. Press
1
until the
001 DATA_TRANS_EXE item displays.
PEM
SERVICE
004
001
TCON_CHANGED
DATA_TRANS_EXE
0
19. For the
DATA_TRANS_EXE item, press
3
to increase the
data value to 1 to execute the update.
NOTE: A warning message indicating the TV cannot be
turned off displays.
PEM
SERVICE
004
001
TCON_CHANGED
DATA_TRANS_EXE
1
DO NOT POWER OFF
Data Value
Warning
Message
Displays
After the update is complete, the data value changes back to
0 and a message indicating the data transfer was successful
displays.
KDL-22EX308/32EX308
25
SERVICE ADJUSTMENTS
PEM
SERVICE
004
001
TCON_CHANGED
DATA_TRANS_EXE
0
DATA TRANSFER
SUCCESS
Data Value
Confirmation
Message
Displays
20. Press
2
until the
005 LDRV_CHANGED item displays.
PEM
SERVICE
005
000
LDRV_CHANGED
DATA_TRANS_SET
0
21. For the
DATA_TRANS_SET item, press
3
to increase the
data value to 1.
PEM
SERVICE
005
000
LDRV_CHANGED
DATA_TRANS_SET
1
Data Value
22. Press
1
until the
001 DATA_TRANS_EXE item displays.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_EXE
0
23. For the
DATA_TRANS_EXE item, press
3
to increase the
data value to 1 to execute the update.
NOTE: A warning message indicating the TV cannot be
turned off displays.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_EXE
1
Data Value
DO NOT POWER OFF
Warning
Message
Displays
After the update is complete, the data value changes back to
0 and a message indicating the data transfer was successful
displays.
24. Proceed to “Verifying the Emitter Output Level”.
KDL-22EX308/32EX308
26
SERVICE ADJUSTMENTS
2-2-5. VERIFYING THE EMITTER OUTPUT LEVEL
If necessary, the emitter LED output level can be increased or decreased.
25. Press
2
until the
009 3D category displays.
PEM
SERVICE
009
000
EMIT_STR
3D
0
Default
Data Value
26. Using the table below, press
3
to increase or press
6
to
decrease the data value.
DATA VALUE
SETTING
0
Strong (Default)
1
Weak
27. Press
MUTING then press
0
to WRITE (Save) the changes.
28. Exit Service Mode by turning the TV Power Off.
29. Proceed to “Verifying the Model and Panel Information”.
2-2-6. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 4 Service Menus for these models,
DIGITAL, CHASSIS, SUB, and PEM. If the DIGITAL Service
Menu is not displayed, press
JUMP or OPTIONS on the
Remote Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID 2597318f
PID0c720000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
T216XW01
Model ID
Product ID
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name
Model ID Product ID
Panel Code
KDL-22EX308
2597318f
0c720000
T216XW01 V3
KDL-22EX308
2597318f
0c720000
T216XW01 V301
KDL-32EX308
25973193
0c720000
LTY(Z)320AP04
KDL-32EX308
25973194
0c720000
T315XW04 V0
5. Exit Service Mode by pressing HOME or turn the
TV power off.
KDL-22EX308/32EX308
27
SERVICE ADJUSTMENTS
2-3. WHITE BALANCE ADJUSTMENTS
By default the White Balance Adjustments are set for optimal viewing.
If White Balance Adjustments are requested, the data is located on the
Panel Engine Micro (PEM) Service Menu.
1. TV must be in Standby Mode. (POWER Off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. The
DIGITAL Service Menu displays.
NOTE: There are 4 Service Menus for these models,
DIGITAL, CHASSIS, SUB, and PEM.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
4. Press
JUMP or OPTIONS on the Remote Commander until
the
PEM Service Menu displays.
PEM
SERVICE
000 VERSION
MAIN
BOOT
DATA
NLD
NLD DATA
QDL NVM
33
LD1.00
37
1.0018W00LA
1.002W00LA
1.017WA46LF
5. Press
2
until the
010 WB_GAIN2_A category displays.
PEM
SERVICE
010
000
WB_GAIN2_A
R_DRV
128
Click on the first or last page to see other KDL-22EX308 / KDL-32EX308 service manuals if exist.