Sony KDL-22EX308 / KDL-32EX308 Service Manual ▷ View online
KDL-22EX308/32EX308
20
SERVICE ADJUSTMENTS
2-1-2. USING THE REMOTE COMMANDER TO VIEW OR
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the Service
Menu items and adjust the Data Values.
DISPLAY
Channel
5
Volume
+
POWER
4. To change the
Category,
press
2
to move to the Next Category or
press
5
to go back to the Previous Category.
Note: Pressing
2
or
5
only changes the Categories within
the Service Menu displayed.
5. To change the
adjustment item,
press
1
to move to the Next Item or
4
to go back to the Previous Item.
6. To change the
Data Value,
press
3
to increase the Data Value or
6
to decrease the Data Value.
7. Press
MUTING then press
0
to WRITE (Save) the changes.
8. To exit service mode, press HOME or turn the TV power off.
2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD
OR LCD PANEL ASSEMBLY
The following procedures must be completed after replacing the BAL
Board or the LCD Panel Assembly
þ
Update the TV to the latest software version
þ
Select the Model
þ
Select the Destination
þ
Reset the Data Value in the Panel Engine Micro
þ
Verify the Emitter Output Level
þ
Verify model and panel information are correct
2-2-1. UPDATING THE SOFTWARE
After replacing the BAL Board or the LCD Panel Assembly, you must
update the software to the latest version.
Instructions for updating the software are included with the software
Instructions for updating the software are included with the software
package. After completing the software update, proceed to
“Verifying the Model”.
KDL-22EX308/32EX308
21
SERVICE ADJUSTMENTS
2-2-2. VERIFYING THE MODEL
After replacing the BAL Board or LCD Panel Assembly, go into Service
Mode to verify the Model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 4 Service Menus for this model, DIGITAL,
CHASSIS, SUB, and PEM. If the DIGITAL Service Menu
is not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
4. Press
2
to move to the
002 MODEL (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
10 : 3a-0
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis
Model Name
Data Value
Code
Name
AZ1-L
KDL-22EX308
10
3a-0
AZ1-L
KDL-32EX308
10
3a-0
DIGITAL
SERVICE
002 MODEL
000 SEG
10: 3a-0
Data Value
Code Name
6. Proceed to “Verifying the Destination”.
KDL-22EX308/32EX308
22
SERVICE ADJUSTMENTS
2-2-3. VERIFYING THE DESTINATION
After replacing the BAL Board or the LCD Panel Assembly, the verify the
destination location is set correctly.
CAUTION: Selecting the incorrect destination may require replacing the
BAL Board.
DIGITAL
SERVICE
002 MODEL
000 SEG
10 : 3a-0
7. Press
1
to move to “
001 DEST”sub category item.
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROUP
DESTINATION
CODE
DATA
VALUE
DESTINATION
UC
3
US/CND
LTN-D
16
MX/
LATIN AMERICA
UC grp
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
Data Value
Destination
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BAL Board replacement.
9. After verifying the destination data value displays,
press
0
to WRITE (Save) the changes.
10. Proceed to “Resetting the Data Value in the Panel Engine
Micro”.
KDL-22EX308/32EX308
23
SERVICE ADJUSTMENTS
2-2-4. RESETTING THE DATA VALUE IN THE PANEL ENGINE
MICRO
For the models listed in this manual, the Panel Engine Micro must be reset
whenever the BAL Board, the LCD Panel, the TCON board, or the driver
board is replaced.
11. Press
JUMP or OPTIONS on the Remote Commander until
the
PEM Service Menu displays.
PEM
SERVICE
000 VERSION
MAIN
BOOT
DATA
NLD
NLD DATA
QDL NVM
33
LD1.00
37
1.0018W00LA
1.002W00LA
1.017WA46LF
12. Press
2
to move to the
001 DL category.
PEM
SERVICE
001
000
DL
DLCC
0
13. Press
1
to move to the
001 PRETEND_ID item.
PEM
SERVICE
001
001
DL
PRETEND_ID
0
14. Press
3
to increase the data value to 1.
PEM
SERVICE
001
001
DL
PRETEND_ID
1
Data Value
15. After verifying the data value displays, press
MUTING
to
WRITE (Save) the changes.
Click on the first or last page to see other KDL-22EX308 / KDL-32EX308 service manuals if exist.