Sony KDF-37H1000 Service Manual ▷ View online
KDF-37H1000
KDF-37H1000
25
When Installing Seperator Block Assy ensure that the Speaker and
[HB] Connectors are not pinched and routed as below.
[HB] Connectors are not pinched and routed as below.
After connecting 9P[HB] and 4P Speaker Connector wire dress to
Holder Wire as shown below
Holder Wire as shown below
SPEAKER WIRE ASSEMBLY AND HB BOARD
KDF-37H1000
KDF-37H1000
26
FERRITE CORE INSTALLATION
Install Ferrite Core ZCAT2017-0930 Sony P/N 1-500-484-21 to the
following connector assys as shown below
following connector assys as shown below
Ferrite Core
p/n 1-500-484-21
CRITICAL FOR EMI
KDF-37H1000
KDF-37H1000
27
Route 7P Ballast Control Conn Assy as shown below.
Lamp Connector from Ballast MUST be kept from Crossing. Please
follow above wire dressing.
follow above wire dressing.
191003518
Route 7P Ballast Control Conn Assy as shown below.
191003517
191003509
Install 3P Ballast Power as shown below and wire dress to Holder
Wire.
Wire.
POWER SUPPLY BLOCK (BALLAST)
T BOARD
S BOARD
KDF-37H1000
KDF-37H1000
28
DUCT BLOCK ASSEMBLY
Wired Dress 3P
Ballast Power to
hooks on Duct Block
as shown to the right.
Ballast Power to
hooks on Duct Block
as shown to the right.
Install Duct Block Assy to Rear Cabinet and Route 3P Ballast power
Connector as shown to Holder Wire on Rear Cabinet
Connector as shown to Holder Wire on Rear Cabinet
Ensure 9P ballast
Connector is wire
dressed as shown to
the right
Connector is wire
dressed as shown to
the right
Connect 9P Ballast/2P thermal sensor/3P [T] and 3P Duct Blk Fan
Connector and dress to wire holders as shown. Do Not close
Completely wire holders.
Connector and dress to wire holders as shown. Do Not close
Completely wire holders.
Click on the first or last page to see other KDF-37H1000 service manuals if exist.