Sony KDF-37H1000 Service Manual ▷ View online
KDF-37H1000
KDF-37H1000
21
Before Installing [G] Board it may be necessary to bend tab slightly in
order to properly install [G] board.
order to properly install [G] board.
Lighting ground should be behind AC cord. UL Tube should be located
on [G] board side of connection as shown below
on [G] board side of connection as shown below
191003519
191003520
Wire Pin
ONLY Wire dress 3P Fan Connector to wire
holder on (1) side of wire as shown below.
CRITICAL FOR EMI
CHASSIS ASSEMBLY
KDF-37H1000
KDF-37H1000
22
Lighting Ground should be inside of Fan Bracket as shown
Install 4P Speaker Connector Assy to [U]
191003512
Install Chassis Assy to Rear Cabinet
Route and Dress 9P and 20P Connecto r Assy to Rear Cabinet as
shown above.
shown above.
CHASSIS ASSEMBLY (CONTINUED)
KDF-37H1000
KDF-37H1000
23
After Installing HC Bracket w/ [HCM] board to Rear Cabinet Route
HCM connector Assy and 4P Speaker Conn Assy to Fan Bracket.
HCM connector Assy and 4P Speaker Conn Assy to Fan Bracket.
HCM connector assy must be installed to [HCM] board before
installing board to HC Bracket
installing board to HC Bracket
After Installing Route above terminal bracket as shown above.
191003507
Install 8P/12P Connector from [HCM] to [U]
Wire Dress 4P Speaker Connector and 12P/8P HC connector assy to
wire holder. Bend wire Holder as necessary to take up "slack" in
cables.
wire holder. Bend wire Holder as necessary to take up "slack" in
cables.
(
)
CHASSIS ASSEMBLY (CONTINUED)
KDF-37H1000
KDF-37H1000
24
SPEAKER WIRE ASSEMBLY
Route 4P Speaker to Wire Holder as shown in Fig 1.
Then Route 4P Speaker and 9P [HB] connectors to wire holder shown
in fig.2
in fig.2
Fig. 1
Fig. 2
Click on the first or last page to see other KDF-37H1000 service manuals if exist.