Sony KDE-55XBR950 (serv.man2) Service Manual ▷ View online
-73-
(4) To change the internal pattern, select the internal pattern selection from the POWER
ON menu using the ↑(up) or ↓(down) key, and press the <ENTER> key.
Setup
value
Display pattern
Setup
value
Display pattern
00
01 to 08 patterns are displayed every 2
seconds.
seconds.
05
Entire screen is cyan
01
Entire screen is blue
06
Entire screen is yellow
02
Entire screen is red
07
Entire screen is white
03
Entire screen is magenta
08
Entire screen is black
04
Entire screen is green
F6
Plant burn-in pattern
From the POWER ON menu, select Burn-in start with the ↑ key or ↓ key
and press the <ENTER> key. The display pattern is automatically generated in PDP.
(6) Select RETURN with ↑ key or ↓ key and press <ENTER> key to return to the menu
screen.
-74-
6.2.5 Logic board parameter forwarding
(1) The module is set according to the same to failure analysis procedure in clause 4.7.
The logic board before being exchanged is installed in the module.
(2) From the main menu, select change Logic board menu with the ↑ key or ↓ key and
press the <ENTER> key.
(3) From the logic board change menu, select data copy with the ↑ key or ↓ key and press
the <ENTER> key. Data is read before the Logic board is exchanged.
(4) The Logic board is exchanged.
Main menu
Logic board change menu
-75-
(5) From the logic board change menu, select data paste with the ↑ key or ↓ key and press
the <ENTER> key. Data is written in the exchanged Logic board.
(6) Select RETURN with ↑ key or ↓ key and press <ENTER> key to return to the menu
screen.
Logic board change menu
-76-
6.2.6 Accumulation time reset
(1) The module is set according to the same to failure analysis procedure in clause 4.7.
(2) From the main menu, select Power-on time menu with the ↑ key or ↓ key and press the
<ENTER> key.
(3) From the Power-on time menu, select Operation hours with the ↑ key or ↓ key and
press the <ENTER> key. The Operation hour is input. *It is not possible to change in
the energizing time according to the version of the service software.
the energizing time according to the version of the service software.
(4) "minute" is continuously input and < ENTER > key is pushed.
(5) "Second" is continuously input and < ENTER > key is pushed.
(6) Select RETURN with ↑key or ↓key and press <ENTER> key to return to the menu
screen.
Main menu
Accumulated power on time menu
Click on the first or last page to see other KDE-55XBR950 (serv.man2) service manuals if exist.