DOWNLOAD Sony KD-55S8005C Service Manual ↓ Size: 19.84 MB | Pages: 127 in PDF or view online for FREE

Model
KD-55S8005C
Pages
127
Size
19.84 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kd-55s8005c.pdf
Date

Sony KD-55S8005C Service Manual ▷ View online

KD-55/65S8505C, KD-55/65S8005C  
TROUBLE SHOOTING 
3) Power Off Checking*3 
No Sound 
Without LED 3x 
No 
No sound only  
Analog RF and Digital RF ? 
Yes 
No 
No sound only HDMI ?  Yes 
No 
No 
Headphone is connected to 
HP/Audio Out terminal ? 
Disconnect the Headphone 
Go to 
Power Off Checking*1 
Yes 
No 
Go to 
No Sound Tuner 
Go to 
No Sound HDMI 
Go to  
No Sound Audio 
[Sound]→ 
[Headphone Speaker Link]  
setting is [On] ? 
Change [Sound]→ 
[Headphone Speaker Link]  
to [Off],  OK ? 
Replace B-PWB 
Yes 
No 
HP/Audio out terminal or Headphone detect  
GPIO may be broken 
AV receiver is connected 
to HDMI in ? 
Yes 
Select [External Inputs]→  
[BRAVIA Sync Settings]→ 
[BRAVIA Sync Control]→[off] 
[Speakers] setting is 
[Audio System] ? 
Change the setting to 
[TV Speakers] 
Yes 
Yes 
No 
101 
KD-55/65S8505C, KD-55/65S8005C  
TROUBLE SHOOTING 
3-3-4. 3 Times Blinking (HDMI EQ Error) 
3-time blinking 
IC5212 
BMFL/BMFW board 
Check  
VS GND impedance 
of +1.0V_HDMI 
at HDMI EQ side  
(ex.C5335) 
NG 
Check  
VS GND impedance 
of EQ_+3.3V_MAIN 
at HDMI EQ side  
(ex.C5317) 
NG 
OK 
OK 
IC5212 
Check  
VS GND impedance 
of +5V_BOSTON 
at HDMI EQ side  
(ex.C5351) 
NG 
IC5212 
OK 
Check  
Voltage 
of +1.0V_HDMI, 
EQ_+3.3V_MAIN, 
+5V_BOSTON 
at HDMI EQ side  
(ex.C5335, C5317, 
and C5351, ) 
NG 
Power, 
DDCON 
OK 
Check  
Frequency of X’tal  
(X5202)  
27MHz? 
NG 
X’tal or 
around parts. 
X5202,  
R5478(100ohm), 
R5368(1Mohm) 
C5298(10pF) 
C5297(12pF) 
OK 
Check  
I2C_C bus signal. 
at CL5259 and 
CL5261. 
NG 
IC5212 
Or IC1000 
OK 
IC1000 
This 3 times blinking function  for HDMI EQ 
error has been disabled  for  the SW later 
than PKG2161.  
So, for the  above applicable models, you 
can Ignore this flow. 
 
For those models  with  the SW before  
PKG2093.  
This  3 times blinking function  for HDMI 
EQ error has been enabled except for the 
sets with the SW updated by OTA. 
102 
KD-55/65S8505C, KD-55/65S8005C  
TROUBLE SHOOTING 
3-3-5. 4 Times Blinking (LED Voltage Error) 
4-time blinking 
Check  
R9027 
 on the B* Board 
B* Board 
LED driver or G* board 
Between 0.898V to 2.997V 
 Change LD board or G* board. 
0.897V or less 
103 
KD-55/65S8505C, KD-55/65S8005C  
TROUBLE SHOOTING 
3-3-6. 5 Times Blinking (Panel Communication Error) 
5-times blinking 
Check  
“+12.5V_TCON” at 
CN9000
 
 
on the B-Board 
Replace the Harness  
Between G-Board  
and B-Board 
Replace 
 the V-By-One FFC 
Change 
B-Board 
Change  
Panel (T-con) 
Harness is 
 suspicious 
V-By-One FFC 
is suspicious 
B-Board is 
 suspicious 
NG 
OK 
NG 
Symptom  
improvement 
Symptom  
improve 
Symptom  
improve 
NG 
NG 
G-Board is 
suspicious 
Replace G-Board 
NG 
Panel (T-Con) is 
 suspicious 
Symptom  
improvement 
OK 
104 
Page of 127
Display

Click on the first or last page to see other KD-55S8005C service manuals if exist.