DOWNLOAD Sony VPL-VW85 / VPL-VW90ES Service Manual ↓ Size: 251.48 KB | Pages: 20 in PDF or view online for FREE

13

VPL-VW85

START CODE

B0

B1
B2

B4

B3

DATA

ITEM NUMBER

TYPE

CHECK SUM

*1

END CODE

B5

B6

B7

[A9h]

Put the item number. 
Refer to the item list in the sections 2-1-1 and 2-1-2.

SET: 00h (Set data)
GET: 01h (Get data)

SET:

Put the Data value described in the item list in the sections 2-1-1 and 2-1-2.

GET: Unused. Set Dummy data [00h, 00h]

Check Sum

[9Ah]

START CODE

B0

B1
B2

B4

B3

DUMMY DATA

ACK / NAK

TYPE

CHECK SUM

*1

END CODE

B5

B6

B7

[A9h]

Refer to the reply definition table in the section 2-2.

[03h]

This data does not mean any senses.
Dummy Data [00h, 00h] is stored.

Check Sum

[9Ah]

START CODE

B0

B1
B2

B4

B3

DATA

ITEM NUMBER

TYPE

CHECK SUM

*1

END CODE

B5

B6

B7

Check Sum

[9Ah]

[A9h]

Refer to the item list in the sections 2-1-1 and 2-1-2.

[02h]
Express data to be Reply data

Data value described in the item list
in the sections 2-1-1 and 2-1-2.

The block format of Simplifi ed Command for RS-232C as shown in the Fig. 1-1. In this section, the block 
format for Simplifi ed Command is provided.

[Send]
The block format for sending request is shown below.

[Receive (without data)]
The block format for response which includes no return data is shown below. Response is always sent by 
PROJECTOR.

[Receive (with data)]
The block format for response which includes return data is shown below. Response is always sent by 
PROJECTOR.

*1: CHECK SUM:  B1 to B5 are calculated by OR. Refer to the example below.
 

<Example of Calculation>

 

0xA9 1010 1001 0xA9 1010 1001

 

0xA9 1010 1001 0x9A 1001 1010

 

Answer 

1010 1001 Answer 

1011 1011

 

  0xA9 

  0xBB

14

VPL-VW85

START CODE = A9h
ITEM NUMBER = 0020h (Wide Mode)
SET/GET = 00h (SET)
DATA = 0003h (Zoom)
CHECK SUM = 23h
END CODE = 9Ah

You will receive the packet below if the process is successfully completed.

START CODE = A9h
ACK/NAK = 0000h (Complete)
ACK = 03h
DUMMY DATA = 0000h
CHECK SUM = 03h
END CODE = 9Ah

There’s another way to realize the same purpose. There is “WIDE MODE TOGGLE” key on the infrared 
remote controller. By using this key, wide mode can be changed. Issue the Infrared Remote Command for 
this key several times to set wide mode “Zoom”. Packet format will make as follows. Refer to the Table 
2-8 for WIDE MODE TOGGLE.

START CODE = A9h
ITEM NUMBER = 196Eh (WIDE MODE TOGGLE)
SET/GET = 00h (SET)
DATA = 0000h
CHECK SUM = 7Fh
END CODE = 9Ah

This model is equipped with the protocol that conforms to the Device Discovery stipulated by AMX. Con-
tact AMX for details about the Device Discovery.

VPL-VW85

The material contained in this manual consists of 
information that is the property of Sony Corporation.
Sony Corporation expressly prohibits the duplication 
of any portion of this manual or the use thereof for any 
purpose other than the operation or maintenance of the 
equipment described in this manual without the express 
written permission of Sony Corporation.

Le matériel contenu dans ce manuel consiste en 
informations qui sont la propriété de Sony Corporation.
Sony Corporation interdit formellement la copie de 
quelque partie que ce soit de ce manuel ou son emploi 
pour tout autre but que des opérations ou entretiens de 
l’équipement à moins d’une permission écrite de Sony 
Corporation.

Das in dieser Anleitung enthaltene Material besteht aus 
Informationen, die Eigentum der Sony Corporation sind.
Die Sony Corporation untersagt ausdrücklich die 
Vervielfältigung jeglicher Teile dieser Anleitung oder den 
Gebrauch derselben für irgendeinen anderen Zweck 
als die Bedienung oder Wartung der in dieser Anleitung 
beschriebenen Ausrüstung ohne ausdrückliche 
schriftliche Erlaubnis der Sony Corporation. 

このマニュアルに記載されている事柄の著作権は当社に
あります。
従って，当社の許可なしに無断で複写したり，説明内容

（操作，保守等）と異なる目的で本マニュアルを使用する

ことを禁止します。

Sony Corporation

VPL-VW85 (CN)
VPL-VW85 (J)
VPL-VW85 (SY)
VPL-VW85 (U)
VPL-VW90ES (CN)
VPL-VW90ES (J)
VPL-VW90ES (SY)
VPL-VW90ES (U) E
9-968-691-02

Printed in Japan

2010. 10 32

©2009