Sony VPL-AW10 / VPL-AW15 Service Manual ▷ View online
1-9
VPL-AW10/AW15
1-3-8. Lamp Power Supply Section
Harnesses
Harnesses
7 Three screws
(+BVTP 3
(+BVTP 3
x 12)
8
Lamp power
supply section
1 Tape
Harnesses
6 Three claws
4 Open the clamp.
5 Open the F holder.
2 G board CN202
3 G board CN203
(Fuse connector assembly)
(Fuse connector assembly)
Fuse connector assembly
Fuse connector assembly
Fuse connector assembly
1-10
VPL-AW10/AW15
1-3-10. Lamp Power Supply-1
1 Three screws
(+BVTP 3
(+BVTP 3
x 12)
2 Lamp duct
7 DC fan
(Sirocco)
(Sirocco)
6 Cushion
(Lamp fan)
(Lamp fan)
8 Remove the shield cover (BL)
in the direction of the arrow.
in the direction of the arrow.
3 Fan connector
4 Fan harness
5 Four fan dampers
Be careful not to drop.
1-3-9. TL Board and Fuse Connector Assembly
CN90
4 Fuse connector assembly
2 Shield Case (BL)
1 Two screws
(+BVTP 3
(+BVTP 3
x 12)
Tape
Lamp power supply section
3 TL board
1-11
VPL-AW10/AW15
1-3-11. Lamp Power Supply-2
3 Ballast holder base
4 Harnesses
2 Five claws
6
Lamp power supply
5 Four dowels
Claw
Ballast holder base
P1
1 Two screws
(+BVTP 3
(+BVTP 3
x 12)
1-12
VPL-AW10/AW15
1-3-12. DC Fan (Sirocco)
6 DC fan
(Sirocco)
(Sirocco)
5 Cushion (Lamp fan)
4 Fan connector
2 Fan harnesses
1 Ballast holder base
3 Four fan dampers
Be careful not to drop.
1-3-13. DC Fan (80), and NF Board
4 Four corner pads
(Fan)
(Fan)
3 Fan holder (G)
1 Fan connector
5 DC fan (80)
7 NF board
2 Two screws
(+BVTP 3
(+BVTP 3
x 12)
6 Screw
(+PSW M3
(+PSW M3
x 8)
CN40
Front Side
of Unit
of Unit
Fan connector
Shield cover (C)
CN705
Tape
Clamp filter (ferrite core)
CN1201
Remove the ballast hilder base. (Refer to section 1-3-11, step 1 to 3.)
Click on the first or last page to see other VPL-AW10 / VPL-AW15 service manuals if exist.