Sony DPP-FP95 Service Manual ▷ View online
3-9
DPP-FP95
3-3-6
. ABOUT THE ERROR INDICATION
In this unit, “printer status” and “last 10 error status” can be indicated
and checked in the service mode.
and checked in the service mode.
Startup procedure
1.
Start the service mode. (Refer to Section 3-1-1.)
2.
Select “Print Status” using the DIRECTION buttons (f,F)
and press the [ENTER] button.
“Status indication” screen is displayed. The 1/2 page and the
2/2 page are displayed by using the DIRECTION buttons (f,
F).
and press the [ENTER] button.
“Status indication” screen is displayed. The 1/2 page and the
2/2 page are displayed by using the DIRECTION buttons (f,
F).
**Error 0** is displayed on the initial status screen in the past error
status. To display the earlier error history, press the DIRECTION
button (G) and to display the later error history, press the
DIRECTION button (g). The pages can be selected by using the
DIRECTION buttons (f, F).
status. To display the earlier error history, press the DIRECTION
button (G) and to display the later error history, press the
DIRECTION button (g). The pages can be selected by using the
DIRECTION buttons (f, F).
When the DIRECTION button (g) is pressed in the **Error 0**
state, **Last Status** is displayed. In the case that no error occurred
in the past, **Last Status** is displayed on the initial status screen.
Use the DIRECTION button (g) to display **Current Status**.
state, **Last Status** is displayed. In the case that no error occurred
in the past, **Last Status** is displayed on the initial status screen.
Use the DIRECTION button (g) to display **Current Status**.
Ribbon:
Ribbon type
None:
Ribbon is not installed.
Post:
Cartridge for postcard size is inserted.
L:
Cartridge for L size is inserted.
Cleaning:
Cartridge for cleaning is inserted.
Unknown:
Unknown
Tray:
Tray type
Post:
Tray for postcard size is inserted.
L:
Tray for L size is inserted.
None;
Tray is not installed.
3.
After confirming the error indication, quit the service mode.
(Refer to Section 3-1-1.)
(Refer to Section 3-1-1.)
Description of screen
Indication in red:
Status indication
**Last Status**:
Status of last printing
**Current Status**:
Current status
**Error 0**:
Status when the last error occurred.
**Error 1**:
Status of error occurred two times earlier.
The last ten errors are stored.
The last ten errors are stored.
**Error 9**:
Status of error occurred ten times earlier.
Card:
King of memory card when making an error
Error:
Error type
No Error:
No error
No Ribbon:
No ribbon
Ribbon End:
Ribbon end
Ribbon Error:
Ribbon error
Paper End:
No paper
Paper Long:
Paper length error (long)
Paper Short:
Paper length error (short)
Paper Exist:
Paper exists
PE Error:
PE sensor error
Head Error:
Head error
MMotor Error:
DC motor error
SMotor Error:
Stepping motor error
Mode Error:
Mode transition error
HeatStrage Error:
Heat storage correction error
Other Error:
Other error
Unknown:
Unknown
MD Status:
Not used
Pass:
Print pass
Feed:
During paper feeding
Y:
During yellow printing
M:
During magenta printing
C:
During cyan printing
Lami:
During laminated paper printing
Unknown:
Unknown
Total Try:
Total count of tried printing
Total Print:
Total count of printing
HEAD A/D:
Thermistor A/D value of head
SupStep:
Count of paper feed step
Progress:
Progress (%) of each color (Y, M, C, L)
during printing
during printing
Sensor:
Each sensor value (1 or 0)
R2
R1
R0
RM
T1
T0
PE
CF_VS
R2
R1
R0
RM
T1
T0
PE
CF_VS
Cool down:
Cool down (Decrease the heat temperature)
Paper Sup:
Paper feed
Paper Rev1:
Paper reverse 1
(Reverse paper to the point of PE paper feed
by determining the paper length.)
(Reverse paper to the point of PE paper feed
by determining the paper length.)
Paper Rev2:
Paper reverse 2
(Reverse paper after single color printing)
(Reverse paper after single color printing)
Paper Init0:
Paper initial point 0
Paper Init1:
Paper initial point 1
Print:
Printing
Paper Eject1:
Paper eject 1
(Paper eject at the completion of printing)
(Paper eject at the completion of printing)
Paper Error Eject0:
Error paper eject 0
Paper Error Eject1:
Error paper eject 1
Timeout M0/1:
Return to M0 or M1
Unknown:
Unknown
Mode Pos:
Head position
PR
RS
PF
PU
RL
PR
RS
PF
PU
RL
Unknown:
Unknown
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.03
3-10E
DPP-FP95
3-3-7
. MECHANICAL OPERATION CHECK
The mechanical check is performed in the service mode.
Procedure:
1.
Start the service mode. (Refer to Section 3-1-1.)
2.
Select “Mechanical Test” using the DIRECTION buttons
(f,F) and press the [ENTER] button. The following menu
screen is displayed.
(f,F) and press the [ENTER] button. The following menu
screen is displayed.
3.
Press the [CANCEL] button on this Menu screen to return to
the startup screen of the service mode while any test mode is
running, except when the head motor aging or the paper feed
motor aging is running.
the startup screen of the service mode while any test mode is
running, except when the head motor aging or the paper feed
motor aging is running.
4.
When the mechanical operation check is complete, quit the
service mode. (Refer to Section 3-1-1.)
service mode. (Refer to Section 3-1-1.)
Description of operation:
Each operation of this unit is performed when the button on the
operation panel is pressed.
operation panel is pressed.
Note
: Do not press the button that is not described below.
• [ENTER] button:
The head position returns to the initial state when this button is
pressed.
pressed.
• DIRECTION button (f) :
The head position moves upward when this button is pressed.
• DIRECTION button (F) :
The head position moves downward when this button is pressed.
• [MENU] button:
The head motor aging starts when this button is pressed. When
the [CANCEL] button is pressed during aging, the operation is
discontinued.
the [CANCEL] button is pressed during aging, the operation is
discontinued.
• [PRINT] button:
The electric current of head motor is switched when this button
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H
t Electric current M t Electric current L
(repeated)
• DIRECTION button (G):
The paper feed motor moves in the paper feed direction when
this button is pressed. The speed changes every time this button
is pressed.
(Low speed L
this button is pressed. The speed changes every time this button
is pressed.
(Low speed L
t Middle speed M t High speed H t Stop
Stp)
• DIRECTION button (g):
The paper feed motor moves in the paper eject direction when
this button is pressed. The speed changes every time this button
is pressed.
(Low speed L
this button is pressed. The speed changes every time this button
is pressed.
(Low speed L
t Middle speed M t High speed H t Stop
Stp)
•
(Enlarge) button:
The paper feed motor aging starts when this button is pressed.
When the [CANCEL] button is pressed during aging, the operation
is discontinued.
When the [CANCEL] button is pressed during aging, the operation
is discontinued.
•
(Reduce) button:
The electric current of paper feed motor is switched when button
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H
t Electric current M2 t Electric current
M1
t Electric current L (repeated)
To quit each operation, press the [CANCEL] button.
The screen returns to the menu screen.
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
Ver. 1.1 2008.03
Revision History
985229414.pdf
DPP-FP95
Ver.
1.0
1.1
1.2
1.3
Date
2008.03
2008.03
2008.08
2008.10
History
Official Release
Revised-1
Revised-2
Revised-3
Contents
—
• Change of ADJUSTMENT AND CHECK
S.M. Correction:
Page 3-1
,
Page 3-4
Page 3-5
,
Page 3-7
Page 3-9
,
Page 3-10E
• Change of ADJUSTMENT AND CHECK
S.M. Correction:
Page 3-4
• Change of CHECKING SUPPLIED
ACCESSORIES.
S.M. Correction:
S.M. Correction:
Page 1-4
S.M. Rev.
issued
—
Yes
Yes
Yes
Reverse
Revision History
985229414.pdf
DPP-FP95
Ver.
1.0
1.1
1.2
1.3
Date
2008.03
2008.03
2008.08
2008.10
History
Official Release
Revised-1
Revised-2
Revised-3
Contents
—
• Change of ADJUSTMENT AND CHECK
S.M. Correction:
Page 3-1
,
Page 3-4
Page 3-5
,
Page 3-7
Page 3-9
,
Page 3-10E
• Change of ADJUSTMENT AND CHECK
S.M. Correction:
Page 3-4
• Change of CHECKING SUPPLIED
ACCESSORIES.
S.M. Correction:
S.M. Correction:
Page 1-4
S.M. Rev.
issued
—
Yes
Yes
Yes
Reverse