Sony DPP-EX5 Service Manual ▷ View online
2-2
DPP-EX5 V1
2-1-3. UV-44 Board
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the DK-44 board. (Refer to Section 2-1-2.)
9.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
10. Remove the E chassis assembly. (Refer to Section 2-
4.)
11. Remove one screw (BVTP 2.6
x8), then remove the
UV fixing plate.
12. Remove the UV cover from the UV-44 board.
13. Remove the two precision screws (P 2
x5) and
disconnect one flexible flat cable from the connector
(CN3001) on the UV-44 board, then remove the UV-
44 board.
44 board.
14. Install the UV-44 board in the reverse order of steps 1
to 13.
Precision P 2
x
5
CN3001
BVTP
2.6
2.6
x
8
UV-44 board
UV cover
UV fixing plate
Flexible flat cable
2-1-4. MD-44 Board
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Disconnect the seven harnesses from the connectors
(CN903, CN904, CN905, CN906, CN908, CN909 and
(CN903, CN904, CN905, CN906, CN908, CN909 and
CN910) and two flexible flat cables from the
connectors (CN901 and CN907) on the MD-44 board.
connectors (CN901 and CN907) on the MD-44 board.
9.
Remove the three screws, then remove the MD-44
board.
board.
10. Install the MD-44 board in the reverse order of steps 1
to 9.
CN901
CN903
CN904
CN905
CN906
CN907
CN908
CN909
CN910
MD-44 board
Flexible
flat cable
flat cable
Harness
Harnesses
Harnesses
Harness
Flexible
flat cable
flat cable
BVTT
2.6
x
5
BVTT
2.6
x
5
2-3
DPP-EX5 V1
Harness
JD-44 board
P2
x
3
CN961
2-1-5. JD-44 Board
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the MD-44 board. (Refer to Section 2-1-4.)
9.
Remove one screw, then remove the JD-44 board.
10. Disconnect one harness from the connector (CN961)
on the JD-44 board.
11. Install the JD-44 board in the reverse order of steps 1
to 10.
2-4
DPP-EX5 V1
PE-44 board
Paper feed
frame assembly
frame assembly
Paper feed
frame assembly
frame assembly
Hook
Harness
CN971
A
B
E chassis
assembly
assembly
2-1-6. PE-44 Board
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the DK-44 board. (Refer to Section 2-1-2.)
9.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
10. Remove the E chassis assembly. (Refer to Section 2-
4.)
11. While pushing the hook of the paper feed frame
assembly in the direction indicated by the arrow A,
remove the PE-44 board in the direction indicated by
remove the PE-44 board in the direction indicated by
the arrow B.
12. Disconnect one harness from the connector (CN971)
on the PE-44 board.
13. Install the PE-44 board in the reverse order of steps 1
to 12.
2-5
DPP-EX5 V1
Paper guide
assembly
assembly
Paper feed
frame assembly
frame assembly
Hook
Hook
Hook
Hook
A
A
B
RM-44 board
Paper feed
frame assembly
frame assembly
Hook
Harness
CN981
Hook
RM-44 board
2-1-7. RM-44 Board
1.
Remove the panel (L). (Refer to Section 1-2-1.)
2.
Remove the panel (R). (Refer to Section 1-2-2.)
3.
Remove the panel (TOP) assembly (Refer to Section
1-2-3.)
1-2-3.)
4.
Remove the SW-44 board. (Refer to Section 2-1-1.)
5.
Remove the front door. (Refer to Section 1-2-4.)
6.
Remove the cabinet (L). (Refer to Section 1-2-5.)
7.
Remove the ferrite holder. (Refer to Section 2-8.)
8.
Remove the DK-44 board. (Refer to Section 2-1-2.)
9.
Remove the paper eject guide assembly. (Refer to
Section 2-3.)
10. Remove the E chassis assembly. (Refer to Section 2-
4.)
11. Remove the MD-44 board. (Refer to Section 2-1-4.)
12. Remove the paper feed frame assembly. (Refer to
Section 2-5.)
13. Remove the four hooks, then remove the paper guide
assembly from the paper feed frame assembly.
14. Remove the two hooks of the paper feed frame
assembly in the direction indicated by the arrow A,
then remove the RM-44 board in the direction
indicated by the arrow B.
indicated by the arrow B.
15. Disconnect one harness from the connector (CN981)
on the RM-44 board.
16. Install the RM-44 board in the reverse order of steps 1
to 15.
Click on the first or last page to see other DPP-EX5 service manuals if exist.