Sony DPF-W700 / DPF-WA700 Service Manual ▷ View online
DPF-W700/WA700
– 13 –
DPF-WA700
手順:
1. [音量 +]ボタンを押したままACアダプタを挿入し,電源を
1. [音量 +]ボタンを押したままACアダプタを挿入し,電源を
入れる。
注意1: [音量 +]ボタンは下記画面が表示されるまで押し続けてく
ださい。
upgrading... please wait
2. 下記画面が表示される。[音量 +]ボタンを押し,“reboot
into factory test”を選択し,[メニュー ]ボタンを押す。
(本機が再起動し,“Factory Test”モードに入ります)
注意2: “Factory Test”モードに入るまで約30 ∼ 40秒程掛かりま
す。
System recovery <3e>
System recovery utility
reboot system now
apply update from sdcard
reset data
apply update from sdcard
reset data
reboot into factory test
System recovery <3e>
お客様がネットワーク
アップデートを行っていない場合:
お客様がネットワーク
アップデートを行っていた場合:
System recovery utility
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
wipe media partition
apply update from sdcard
wipe data/factory reset
wipe cache partition
wipe media partition
reboot into factory test
3. “TestMode”タブをタッチし,“(1).Touch calibration test”
をタッチする。
(1).Touch calibration test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
Settings
TestMode
4. 下記画面が表示されたことを確認し,画面をタッチする。
Touch Screen Calibration: Please follow the steps carefully
Touch the screen to contonue.
5. 画面に表示される十字の中心点を順番にタッチする。
Tap in the middle of the blue cross
6. 全ての十字の中心点をタッチし終えると,下記画面が表示
される。
“Yes”ボタンをタッチする。
Save and Quit
Save and quit touch calibration?
Yes
No
7. 画面に表示される丸を全てタッチする。
(選択された丸は色が変化します)
back
8. “back”ボタンをタッチする。
back
9. この後の作業は交換した部品によって異なる。
・ フロントカバー組立およびタッチパネルを交換した場合:
ACアダプタを抜き電源を切り,“タッチパネルキャリブ
レーション”を終了する。
・ マウント済みメイン基板を交換した場合:
手順10 ∼ 12の作業を行い,
“タッチパネルキャリブレー
ション”を終了する。
10. “Settings”タブをタッチする。
(1).Touch calibration test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
Settings
TestMode
11. “Restore all settings”中の“Action”をタッチする。
(“Action”の背景が白色に変化し,“Done”の文字色が赤色
に変化します。その後,本機は自動的に再起動します)
注意3: “Restore all settings”は約5分程掛かります。作業中はタッ
チパネルに触れないでください。
注意4: メイン基板を交換しない修理の場合は,
“Restore all settings”
を実行しないでください。
設定,内蔵メモリなど全ての情報がクリアされます。
表示されている文字/値は参考例です。
Destination
J1
J1
U2
CA2 CEK CED CEU E33 E32 AU3 JE3
KR2 CN9 TW6 AR2 BR4 E35
LCD
N
NN
Developer.
SQA
MK
Group:
Normal
Version:
KarnelVersion: 2.6.34 kanda@jpc00115762#7
KarnelVersion: 2.6.34 kanda@jpc00115762#7
MonOct3 19:25:12JST2011
ChecksumNumber:e614efbe
ChecksumNumber:e614efbe
1.10.06
OSVersion:
2.3.4
SDG
ON
OFF
Settings
TestMode
Restore all settings:
Done
Action
Action
Done
12. “Restore all settings”が終了した後,下記画面が表示された
ことを確認してからACアダプタを抜き,電源を切る。
注意5: 絶対に画面に触れないでください。
タッチパネルの調整を行います。
画面の指示に従って調整してください。
画面をタッチして次に進んでください。
Ver. 1.1 2012.01
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
DPF-W700/WA700
– 14 –
5. OPERATION CHECKS
When the following parts are replaced, perform the operation checks.
• Complete MAIN board
• Front cover assy
• Touch
• Front cover assy
• Touch
panel
DPF-W700
Procedure:
1. Insert the AC adapter to turn the power on.
2. Confirm that the standby lamp has lit up green, and press the [MENU]
1. Insert the AC adapter to turn the power on.
2. Confirm that the standby lamp has lit up green, and press the [MENU]
button after about 2 seconds.
– Rear top view –
Standby lamp
Note
1: Continue pressing the [MENU] button untilthe following screen is
displayed.
Displayed characters/values are example.
Version
Group
FW 0.25 (04139B95)
boot 0.07 (99E32857)
boot 0.07 (99E32857)
bootloader 1.00
MAC 00:45:A2:25:64:34
MK
SQA
Restore all settings
Dev
Normal
Settings
TestMode
Destination
3. Touch the “TestMode” tab, and touch the circles.
(The selected circle changes color)
Note
2: Touch the 4 following circles.
Displayed characters/values are example.
AP name PABLIC
Link quality 84%
Strengthen. -51 dBm
Link quality 84%
Strengthen. -51 dBm
Settings
Destination
TestMode
MENU
POWER
wifi Rx
PANEL
CALIB.
CALIB.
(MENU+POWER)
TP test
LCD(USB-A)
LCD(SD)
LCD(MS)
LCD(eMMC)
4. Press the [MENU] button on the main unit, and confirm that “MENU”
on the screen changes to red. At this time, confirm simultaneously
that LCD back light luminosity falls.
that LCD back light luminosity falls.
Displayed characters/values are example.
AP name PABLIC
Link quality 84%
Strengthen. -51 dBm
Link quality 84%
Strengthen. -51 dBm
Settings
Destination
TestMode
MENU
POWER
wifi Rx
PANEL
CALIB.
CALIB.
(MENU+POWER)
TP test
LCD(USB-A)
LCD(SD)
LCD(MS)
LCD(eMMC)
5. Press the [1] button on the main unit, and confirm that “POWER”
on the screen changes to red.
Displayed characters/values are example.
AP name PABLIC
Link quality 84%
Strengthen. -51 dBm
Link quality 84%
Strengthen. -51 dBm
Settings
Destination
TestMode
MENU
POWER
wifi Rx
PANEL
CALIB.
CALIB.
(MENU+POWER)
TP test
LCD(USB-A)
LCD(SD)
LCD(MS)
LCD(eMMC)
6. Copy the image file (800x480 pixel, JPEG) to the root folder of SD
card on PC, and insert the SD card in the card slot on the main unit.
Have the labels of
SD card facing
outward
SD card facing
outward
SD card
7. Touch the “LCD(SD)” button, and confirm that the images are dis-
played normally.
Displayed characters/values are example.
AP name PABLIC
Link quality 84%
Strengthen. -51 dBm
Link quality 84%
Strengthen. -51 dBm
Settings
Destination
TestMode
MENU
POWER
wifi Rx
PANEL
CALIB.
CALIB.
(MENU+POWER)
TP test
LCD(USB-A)
LCD(SD)
LCD(MS)
LCD(eMMC)
8. Whenever the [MENU] button on the main unit is pressed, the dis-
played image changes.
The previous screen is displayed after all the images are displayed.
Note
3: Images changes by pressing not the [MENU] button displayed on
the screen but the [MENU] button in the rear of this unit.
9. Copy the image file (800x480 pixel, JPEG) to the root folder of
memory stick duo on PC, and insert the memory stick duo in the
card slot on the main unit.
card slot on the main unit.
Memory stick duo
– ENGLISH –
10. Touch the “LCD(MS)” button, and confirm that the images are
displayed normally.
Displayed characters/values are example.
AP name PABLIC
Link quality 84%
Strengthen. -51 dBm
Link quality 84%
Strengthen. -51 dBm
Settings
Destination
TestMode
MENU
POWER
wifi Rx
PANEL
CALIB.
CALIB.
(MENU+POWER)
TP test
LCD(USB-A)
LCD(SD)
LCD(MS)
LCD(eMMC)
11. Whenever the [MENU] button on the main unit is pressed, the dis-
played image changes.
The previous screen is displayed after all the images are displayed.
Note
4: Images changes by pressing not the [MENU] button displayed on
the screen but the [MENU] button in the rear of this unit.
12. Copy the image file (800x480 pixel, JPEG) to the root folder of USB
memory on PC, and insert the USB memory in the memory slot on
the main unit.
the main unit.
USB memory
13. Touch the “LCD(USB-A)” button, and confirm that the images are
displayed normally.
Displayed characters/values are example.
AP name PABLIC
Link quality 84%
Strengthen. -51 dBm
Link quality 84%
Strengthen. -51 dBm
Settings
Destination
TestMode
MENU
POWER
wifi Rx
PANEL
CALIB.
CALIB.
(MENU+POWER)
TP test
LCD(USB-A)
LCD(SD)
LCD(MS)
LCD(eMMC)
14. Whenever the [MENU] button on the main unit is pressed, the dis-
played image changes.
The previous screen is displayed after all the images are displayed.
Note
5: Images changes by pressing not the [MENU] button displayed on
the screen but the [MENU] button in the rear of this unit.
15. Confirm that it is under wireless LAN environment.
Note
6: When you are not in wireless LAN environment, move to the place
which can receive wireless LAN, and perform the confi rmation.
16. Confirm that “AP name” is displayed.
AP name PABLIC
Link quality 84%
Strengthen. -51 dBm
Link quality 84%
Strengthen. -51 dBm
Settings
Destination
TestMode
MENU
POWER
Displayed characters/values are example.
wifi Rx
PANEL
CALIB.
CALIB.
(MENU+POWER)
TP test
LCD(USB-A)
LCD(SD)
LCD(MS)
LCD(eMMC)
17. Touch the “Settings” tab, and confirm that “MAC” is displayed..
Version
Group
FW 0.25 (04139B95)
Displayed characters/values are example.
boot 0.07 (99E32857)
bootloader 1.00
MAC 00:45:A2:25:64:34
MK
SQA
Dev
Normal
Settings
TestMode
Destination
Restore all settings
18. The subsequent works are different by the exchanged parts.
• When front cover assy or touch panel are exchanged:
Unplug the AC adaptor to turn the power off, and end “OPERA-
TION CHECKS”.
• When complete MAIN board is exchanged:
Perform the work of step 19, 20, and end “OPERATION CHECKS”.
19. Touch the “Restore all settings” button, and wait until the display
changes to “Finish”.
Note
7: “Restore all settings” takes about 5 minutes.
Please do not touch the touch panel by any means during work.
When 6 minutes pass and “Restore all settings” is not completed,
unplug the AC adaptor, and redo work from the beginning.
unplug the AC adaptor, and redo work from the beginning.
Note
8: In the repair whitch does not exchange the complete MAIN board,
do not perform “Restore all settings”.
All the informations (settings, built-in memory etc.) are cleared.
Displayed characters/values are example.
Version
Group
FW 0.25 (04139B95)
boot 0.07 (99E32857)
boot 0.07 (99E32857)
bootloader 1.00
MAC 00:45:A2:25:64:34
MK
SQA
Restore all settings
Dev
Normal
Settings
TestMode
Destination
Restore...
Finish
20. Unplug the AC adaptor to turn the power off.
DPF-W700/WA700
– 15 –
DPF-WA700
Procedure:
1. Insert the AC adapter to turn the power on while pressing the [VOL
1. Insert the AC adapter to turn the power on while pressing the [VOL
+] button.
Note
1: Continue pressing the [VOL +] button until the following screen
is displayed.
upgrading... please wait
2. The following screen is displayed. Press the [
VOL +
] button and
select the “reboot into factory test”, and press the [MENU] button.
(This unit is rebooted, and enter the “Factory Test” mode)
Note
2: It takes 30 to 40 seconds until the “Factory Test” mode enters.
System recovery <3e>
System recovery utility
reboot system now
apply update from sdcard
reset data
apply update from sdcard
reset data
reboot into factory test
System recovery <3e>
When the customer is not
performing network update:
performing network update:
When the customer is
performing network update:
performing network update:
System recovery utility
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
wipe media partition
apply update from sdcard
wipe data/factory reset
wipe cache partition
wipe media partition
reboot into factory test
3. Touch the “TestMode” tab, and touch the “(2).Key test”.
(1).Touch calibration test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
Settings
TestMode
4. Press the [MENU] button on the main unit, and confirm that the
“Menu” on the screen changed from yellow to red.
back
Menu
-
+
5. Press the [VOL –] button on the main unit, and confirm that the “–”
on the screen changed from yellow to red.
back
Menu
-
+
6. Press the [VOL +] button on the main unit, and confirm that the “+”
on the screen changed from yellow to red.
back
Menu
-
+
7. Touch the “back” button, after all buttons are checked.
back
Menu
-
+
8. Copy the WMA file (change the file name to “test.wma”) to the root
folder of SD card on PC, and insert the SD card in the card slot on
the main unit.
the main unit.
Have the labels of
SD card facing
outward
SD card facing
outward
SD card
Open the Slot cover
9. Touch the “(3).Audio test”, and confirm that sound is reproduced
normally.
(1).Touch calibration test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
Settings
TestMode
10. Touch the “back” button.
back
start
0.0.2
11. Copy the MP4 file (change the file name to “test.mp4”) to the root
folder of SD card on PC, and insert the SD card in the card slot on
the main unit.
the main unit.
Have the labels of
SD card facing
outward
SD card facing
outward
SD card
Open the Slot cover
12. Touch the “(4).Video test”, and confirm that video is reproduced
normally.
(1).Touch calibration test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
Settings
TestMode
13. Touch the screen 2 to 3 times for 2 seconds.
Confirm that this unit is released from the “(4).Video test”, and
remove the SD card from this unit.
remove the SD card from this unit.
Note
3: Remove the SD card from this unit absolutely.
Touch the screen 2 to 3
times for 2 seconds.
times for 2 seconds.
Ver. 1.1 2012.01
The changed portions from
Ver. 1.0 are shown in blue.
Ver. 1.0 are shown in blue.
DPF-W700/WA700
– 16 –
14. Touch the “(5).LCD test”.
(1).Touch calibration test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
Settings
TestMode
15. Whenever the screen is touched, the color changes in order of red
green yellow blue black white. At this time, Confirm
that a color is displayed normally.
that a color is displayed normally.
16. When white is displayed, it returns to the previous screen by touching
the screen.
17. Insert the SD card in the card slot on the main unit.
Have the labels of
SD card facing
outward
SD card facing
outward
SD card
Open the Slot cover
18. Touch the “(6).SD/MS/USB Test”.
(1).Touch calibration test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
Settings
TestMode
19. Confirm that the SD card capacity is displayed normally.
SD Strage : 3.68GB
SD available : 3.57GB
Flash Strage : 838MB
Flash available : 838MB
SD available : 3.57GB
Flash Strage : 838MB
Flash available : 838MB
back
Displayed characters/values are example.
20. Touch the “back” button, and remove the SD card from this unit.
SD Strage : 3.68GB
SD available : 3.57GB
Flash Strage : 838MB
Flash available : 838MB
SD available : 3.57GB
Flash Strage : 838MB
Flash available : 838MB
back
Displayed characters/values are example.
21. Confirm about memory stick duo and USB memory as well as SD
card of step 17 to 20.
22. Connect this unit and PC by USB cable (Mini-B).
To USB
Mini-B
connector
Mini-B
connector
PC
To USB connector
23. Open the my computer window on PC.
(In this service manual, this unit explains in the example recognized
as J drive)
as J drive)
Removable Disk (I:)
Removable Disk (G:)
Removable Disk (H:)
Removable Disk (J:)
24. Tocuh the “(7).mini USB and memory test”.
(1).Touch calibration test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
(2).Key test
(3).Audio test
(4).Video test
(5).LCD test
(6).SD/MS/USB test
(7).mini USB and memory test
(8).wifi module test
(9).CPU RTC test
Settings
TestMode
25. Tocuh the “mount” button.
back
mount
26. Confirm that the drive name of this unit has been changed into “S-
FRAME” on the my computer window.
Removable Disk (I:)
Removable Disk (G:)
Removable Disk (H:)
S-FRAME (J:)
27. Tocuh the “unmount” button.
back
unmount
28. Confirm that the drive name of this unit has returned to previous
name on the my computer window.
Removable Disk (I:)
Removable Disk (G:)
Removable Disk (H:)
Removable Disk (J:)
29. Tocuh the “back” button.
back
mount
30. Press the [1] button on this unit for more 2 seconds, and touch the
“OK” to turn the power off.
Power off
Turn off the power.
!
OK
Cancel
31. Press the [1] button on this unit to turn the power on.
32. Press the [MENU] button on the main unit.
32. Press the [MENU] button on the main unit.
Click on the first or last page to see other DPF-W700 / DPF-WA700 service manuals if exist.