Sony HDR-TD30 / HDR-TD30E / HDR-TD30V / HDR-TD30VE (serv.man2) Service Manual ▷ View online
HDR-TD30/TD30E/TD30V/TD30VE_L2
1-6
1-8. GPS RECEIVING CHECK (TD30V/TD30VE)
After a part of set was replaced or after the set was assembled, check the reception of GPS signal.
How to check the GPS function
Bring your camcorder to an open area, and set the GPS to ON (
appears on the LCD screen). Your camcorder starts trying to triangulate. When
your camcorder triangulates successfully, it will record the location information at the time movies and photos were recorded.
• The indicator changes according to the strength of GPS signal reception.
• It may take a while before the camcorder starts triangulating.
To return the display of the unit to “A message appears asking you to confirm whether you agree with the terms of the license agreement of the map
data,” make settings according to the instructions on the SERVICE tab in the Adjustment Manual.
data,” make settings according to the instructions on the SERVICE tab in the Adjustment Manual.
Use GPS Assist Data
If you import GPS Assist Data from your computer to your camcorder using the supplied software “PlayMemories Home,” the time it takes the cam-
corder to acquire your location information can be shortened.
Connect the camcorder to a computer that is connected to the Internet. The GPS Assist Data will be updated automatically.
corder to acquire your location information can be shortened.
Connect the camcorder to a computer that is connected to the Internet. The GPS Assist Data will be updated automatically.
1-9. PRECAUTION ON REPLACING THE MM-103 BOARD (TD30V/TD30VE)
Do not factory check MM-103 BOARD (TD30V/TD30VE) in which Map Data is installed.
The Map data is erased when the factory check is done.
The Map data is erased when the factory check is done.
1-10. DISCHARGE OF LED FLASH/VIDEO LIGHT
This model is provided with a flash unit using LED Flash/Video light.
Therefore, the LED Flash/Video light does not have high voltage part and does not need to be discharged.
Therefore, the LED Flash/Video light does not have high voltage part and does not need to be discharged.
1-11. PRECAUTION ON REPLACING THE CABINET (BOTTOM)
1-11-1. Precaution on ordering the CABINET (BOTTOM)
The model display adopts the laser printing method.
Therefore, the Cabinet (Bottom) for replacement differs depending on
the destination.
As similar displays are provided, choose the suitable one for order.
Therefore, the Cabinet (Bottom) for replacement differs depending on
the destination.
As similar displays are provided, choose the suitable one for order.
Note: After replacing the Cabinet (Bottom) , the serial number for it
will be changed to the one exclusive for service use.
Inform a customer of the serial number change and change the
serial number in the repair data.
Inform a customer of the serial number change and change the
serial number in the repair data.
HDR-TD30V (US, CND Model)
Part No.
Description
A-1932-026-A CABINET (BOTTOM (TD30-UC2))
HDR-TD30V (E Model)
Part No.
Description
A-1932-027-A CABINET (BOTTOM (TD30-E23))
HDR-TD30VE (AEP Model)
Part No.
Description
A-1932-028-A CABINET (BOTTOM (TD30-CEN))
HDR-TD30VE (HK Model)
Part No.
Description
A-1932-029-A CABINET (BOTTOM (TD30-HK1))
HDR-TD30VE (AUS Model)
Part No.
Description
A-1932-030-A CABINET (BOTTOM (TD30-AU2))
HDR-TD30 (KR Model)
Part No.
Description
A-1932-031-A CABINET (BOTTOM (TD30-KR2))
HDR-TD30E (JE Model)
Part No.
Description
A-1932-032-A CABINET (BOTTOM (TD30-JE3))
HDR-TD30E (NE Model)
Part No.
Description
A-1932-033-A CABINET (BOTTOM (TD30-CEL))
HDR-TD30E (E Model)
Part No.
Description
A-1932-034-A CABINET (BOTTOM (TD30-E36))
HDR-TD30VE (E Model)
Part No.
Description
A-1937-072-A CABINET (BOTTOM (TD30-E34))
HDR-TD30E (CH Model)
Part No.
Description
A-1932-035-A CABINET (BOTTOM (TD30-CN2))
Serial No.
Serial No.
Serial No.
Serial No.
Serial No.
Serial No.
Serial No.
Serial No.
Serial No.
Serial No.
Serial No.
HDR-TD30/TD30E/TD30V/TD30VE_L2
1-7E
1-11-2. Precaution on Replacing the CABINET (BOTTOM) for US, CND Models
The date of manufacture on the labels should be the same as the previous Cabinet (Bottom) (circled portions shown on the below).
Example: For the figure below, attach the “0C” labels.
Example: For the figure below, attach the “0C” labels.
* No label is supplied with the Cabinet (bottom) for service. Labels are supplied individually.
If you need labels, place an order for 4-415-879-01.
If you need labels, place an order for 4-415-879-01.
HDR-TD30V (US, CND Model)
* Manufacturing year
*
*
Affix the label
1-11-3. Precaution on Replacing the CABINET (BOTTOM) for KR Models
The date of manufacture on the labels should be the same as the previous Cabinet (Bottom) (circled portions shown on the below).
Example: For the figure below, attach the “2013-01” label.
Example: For the figure below, attach the “2013-01” label.
* No label is supplied with the Cabinet (bottom) for service. Labels are supplied individually.
If you need labels, place an order for 4-424-330-01.
If you need labels, place an order for 4-424-330-01.
HDR-TD30 (KR Model)
* Manufacturing year
*
*
Affix the label
1-12. 3D EFFECT CHECK FLOW
[Auto 3D Lens Adjust] procedure
Object to be displayed on the LED during [Auto 3D Lens Adjust]
Distance from the object and zoom rate at the time of 3D shooting
3D movie shooting method while checking 2D movie (for long-time shooting)
Connection method when playing 3D movie on the 3DTV
Use the demonstration movie as 3D data reference movie.
[3D Depth Adjustment] method
Adjustment of stereoscopic effect during playback of movie (on the touch panel)
Adjustment of stereoscopic effect of image displayed on the screen at shooting
(with the MANUAL dial)
1
2
3
When "3D effect cannot be verified on
the LCD panel" is indicated from a user.
Play the demonstration movie and check it
on the LCD panel.
2
Notify the user of the content (
1
) when
sending back the unit.
= Repair content =
After the user's unit has been repaired,
check operation with the user's unit and the
normally operating unit by comparison.
After the user's unit has been repaired,
check operation with the user's unit and the
normally operating unit by comparison.
Test preview
(Shoot an identical object in the same
environment.)
Check playback operation on the LCD
panel.
(Use the demonstration movie.)
Check playback operation on the 3DTV.
(Use the demonstration movie.)
(Shoot an identical object in the same
environment.)
Check playback operation on the LCD
panel.
(Use the demonstration movie.)
Check playback operation on the 3DTV.
(Use the demonstration movie.)
Play the demonstration movie and check it
on the 3DTV.
2
Notify the user that there is no problem with
the product.
Explanation of shooting method and movie
playback method. (in accordance with the
description in the instruction manual)
1
End
Receive the unit for repair.
Perform Light Ray
Performance Check in from
the Adjust manual.
Explain how to make 3D
Depth Adjustment to the user.
(in accordance with the description
in the instruction manual)
3
Play the demonstration
movie with the user's unit and
the normally operating unit, and check
whether the user can view
3D movie.
2
NG
NG
NG
OK
OK
OK
HDR-TD30/TD30E/TD30V/TD30VE_L2
2-1
2. REPAIR PARTS LIST
Follow the disassembly in the numerical order given.
IDENTIFYING PARTS
Link
ACCESSORIES
ASSEMBLY
NOTE:
• -XX, -X mean standardized parts, so they may have some differences from the original
• -XX, -X mean standardized parts, so they may have some differences from the original
one.
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not sup-
plied.
• Due to standardization, replacements in the parts list may be different from the parts
specified in the diagrams or the components used on the set.
• CAPACITORS:
uF:
uF:
μF
• COILS
uH:
uH:
μH
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F:
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F:
nonflammable
• SEMICONDUCTORS
In each case, u: μ, for example:
uA...:
In each case, u: μ, for example:
uA...:
μA... , uPA... , μPA... ,
uPB...
,
μPB... , μPC... , μPC... ,
uPD...,
μPD...
The components identified by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
le numéro spécifié.
• Color Indication of Appearance Parts
Example:
Example:
(SILVER) : Cabinet’s Color
(Silver) : Parts Color
･ Abbreviation
AUS : Australian model
CH : Chinese model
CND : Canadian model
HK : Hong Kong model
JE
AUS : Australian model
CH : Chinese model
CND : Canadian model
HK : Hong Kong model
JE
: Tourist model
KR : Korea model
NE : North European Model
NE : North European Model
View Position
Right View
Left View
Front View
Bottom View
Top View
Back View
JK-404
MM
-103
VC
-655
ST
-266
7
BT Panel Block
4
Cabinet (F) Block
2
Cabinet Bottom
1
Cabinet (L) Assy
5
Cabinet (R) Block
3
Cabinet (Top) Assy
q;
VC-655 Board
9
MM-103 Board
8
JK-404 Board
qa
ST-266 Board
6
Control Switch Block
(PS40200)
qs
Lens Block
• GP-037 Board
• PD-460 Board
• FP-1511 Flexible Board
• PD-460 Board
• FP-1511 Flexible Board
• CM-123 Board
• FP-1505 Flexible Board
• FP-1505 Flexible Board
• FP-1500 Flexible Board
• FP-1501 Flexible Board
• FP-1501 Flexible Board
• FP-1502 Flexible Board
• FP-1512 Flexible Board
• FP-1512 Flexible Board
FP-1509 Flexible Board
FP-1510 Flexible Board
FP-1510 Flexible Board
FP-1507 Flexible Board
FP-1504 Flexible Board
HDR-TD30/TD30E/TD30V/TD30VE_L2
2-2
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don’t pull at wire of connector. It is possible
that a wire is snapped.
• When installing a connector, don’t press down at wire of connector.
It is possible that a wire is snapped.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Click on the first or last page to see other HDR-TD30 / HDR-TD30E / HDR-TD30V / HDR-TD30VE (serv.man2) service manuals if exist.