Sony HDR-HC3 / HDR-HC3E / HDR-HC3EK / HDR-HC3K (serv.man4) Service Manual ▷ View online
6-11
HDR-HC3/HC3E/HC3K/HC3EK_ADJ
3.
8 Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 21
Fixed data-1 (Initialized data)
22
Fixed data-2
23 to B4
Fixed data-1 (Initialized data)
B5
B6
Fixed data-2
B7 to C1
Fixed data-1 (Initialized data)
C2
Fixed data-2
C3 to FF
Fixed data-1 (Initialized data)
4.
9 Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
6-12
HDR-HC3/HC3E/HC3K/HC3EK_ADJ
5.
C Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
Address
Initial value
Remark
NTSC PAL
10
EE
EE
11
00
00
12
00
00
Switching position adj.
13
00
00
14, 15
Fixed data-1 (Initialized data)
16
E0
E0
CAP FG duty adj.
17 to 24
Fixed data-1 (Initialized data)
S VIDEO OUT Y level adj. (NTSC)/
25
70
-
Fixed data-1 (PAL)
26
8A
-
S VIDEO OUT chroma level adj.
27
61
-
(NTSC)/Fixed data-1 (PAL)
28 to 30
Fixed data-1 (Initialized data)
31
Fixed data-2
32, 33
Fixed data-1 (Initialized data)
34
6C
6C
35
90
90
VCO adj. (EVF)
36
Fixed data-2
37 to 39
Fixed data-1 (Initialized data)
3A
92
92
3B
7E
7E
White balance adj. (EVF)
3C
58
58
Contrast adj. (EVF)
3D to 41
Fixed data-1 (Initialized data)
42
Fixed data-2
43, 44
Fixed data-1 (Initialized data)
45
8C
8C
46
AA
AA
VCO adj. (LCD)
47
B5
B5
V-COM adj. (LCD)
48 to 4A
Fixed data-1 (Initialized data)
4B
8F
8F
Transmissive mode white balance
4C
79
79
adj. (LCD)
4D
5C
5C
Contrast adj. (LCD)
4E to 53
Fixed data-1 (Initialized data)
54
7F
7F
Sample hold phase adj.
55 to 5F
Fixed data-1 (Initialized data)
60
Fixed data-2
61 to 6D
Fixed data-1 (Initialized data)
6E
6F
Fixed data-2
70
99
99
Reflective mode white balance
71
8E
8E
adj. (LCD)
72
Fixed data-1 (Initialized data)
73
Fixed data-2
74, 75
Fixed data-1 (Initialized data)
76
5C
5C
Contrast adj. (LCD)
Address
Initial value
Remark
NTSC PAL
77
58
58
Contrast adj. (EVF)
78 to 84
Fixed data-1 (Initialized data)
Fixed data-1 (NTSC)/
85
-
70
S VIDEO OUT Y level adj. (PAL)
86
-
8A
87
-
61
88 to 92
Fixed data-1 (Initialized data)
93
79
79
COMPONENT OUT Y level adj.
94
31
31
COMPONENT OUT Pb level adj.
95
32
32
COMPONENT OUT Pr level adj.
96 to 9B
Fixed data-1 (Initialized data)
9C
Fixed data-2
9D, 9E
Fixed data-1 (Initialized data)
9F
Fixed data-2
A0 to F3
Fixed data-1 (Initialized data)
F4
00
00
F5
00
00
F6
00
00
F7
00
00
F8
00
00
F9
00
00
FA
00
00
FB
00
00
FC
00
00
FD
00
00
FE
00
00
FF
00
00
Fixed data-1 (NTSC)/
S VIDEO OUT chroma level adj.
(PAL)
Emergence memory address
(Mechanism section)
6-13
HDR-HC3/HC3E/HC3K/HC3EK_ADJ
6.
13 Page table
Note 1:
If reading/writing data on pages 13, set data: 01 to page:
0, address: 10, and then select pages: 3. By this data set-
ting, the pages 13 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 3. By this data set-
ting, the pages 13 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 03
Fixed data-1 (Initialized data)
04
08
08
05
00
00
06
46
46
07
01
01
08
02
02
Node unique ID No. input
09
00
00
0A
00
00
0B
00
00
0C to 12
Fixed data-1 (Initialized data)
13
Fixed data-2
14 to 24
Fixed data-1 (Initialized data)
25
Fixed data-2
26 to FF
Fixed data-1 (Initialized data)
7.
18 Page table
Note 1:
If reading/writing data on pages 18, set data: 01 to page:
0, address: 10, and then select pages: 8. By this data set-
ting, the pages 18 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 8. By this data set-
ting, the pages 18 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 51
Fixed data-1 (Initialized data)
52
Fixed data-2
53 to 9B
Fixed data-1 (Initialized data)
9C
Fixed data-2
9D to FB
Fixed data-1 (Initialized data)
FC
Fixed data-2
FD to FF
Fixed data-1 (Initialized data)
8.
1C Page table
Note 1:
If reading/writing data on pages 1C, set data: 01 to page:
0, address: 10, and then select pages: C. By this data set-
ting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: C. By this data set-
ting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to B2
Fixed data-1 (Initialized data)
B3
00
00
B4
00
00
B5
00
00
B6
00
00
B7
00
00
B8
80
80
B9
00
00
BA
00
00
BB
00
00
BC
00
00
BD
00
00
BE
00
00
Error rate check
BF
00
00
C0
00
00
C1
00
00
C2
00
00
C3
80
80
C4
00
00
C5
00
00
C6
00
00
C7
00
00
C8
00
00
C9 to D4
Fixed data-1 (Initialized data)
D5
Fixed data-2
D6 to FF
Fixed data-1 (Initialized data)
9.
1D Page table
Note 1:
If reading/writing data on pages 1D, set data: 01 to page:
0, address: 10, and then select pages: D. By this data
setting, the pages 1D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: D. By this data
setting, the pages 1D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
the 8, 9, C, 13, 18, 1C, 1D Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, 9, C, 13, 18, 1C, 1D Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data
Ver. 1.2 2008.04
6-14
HDR-HC3/HC3E/HC3K/HC3EK_ADJ
1-2-3.
Initialization of F, 63 to 6F Page Data
1.
Initializing of F, 63 to 6F Page Data
Note 1:
If “Initialization of Pages F, 63 to 6F” is executed, all
data on pages F, 63 to 6F are initialized. (Only an indi-
vidual page cannot be initialized)
data on pages F, 63 to 6F are initialized. (Only an indi-
vidual page cannot be initialized)
Note 2:
If the F, 63 to 6F page data has been initialized, the fol-
lowing adjustments need to be performed again.
1) Modification of F, 63 to 6F page data
2) Camera system adjustment
lowing adjustments need to be performed again.
1) Modification of F, 63 to 6F page data
2) Camera system adjustment
Adjustment Page
F
Adjustment Address
00 to FF
Adjustment Page
63
Adjustment Address
00 to FF
Adjustment Page
64
Adjustment Address
00 to FF
Adjustment Page
65
Adjustment Address
00 to FF
Adjustment Page
66
Adjustment Address
00 to FF
Adjustment Page
67
Adjustment Address
00 to FF
Adjustment Page
68
Adjustment Address
00 to FF
Adjustment Page
69
Adjustment Address
00 to FF
Adjustment Page
6A
Adjustment Address
00 to FF
Adjustment Page
6B
Adjustment Address
00 to FF
Adjustment Page
6C
Adjustment Address
00 to FF
Adjustment Page
6D
Adjustment Address
00 to FF
Adjustment Page
6E
Adjustment Address
00 to FF
Adjustment Page
6F
Adjustment Address
10 to FF
Initializing method:
Order Page Address Data Procedure
1
0
01
01
2
0
10
00
3
6
01
Set the following data, and
press PAUSE (Write) button.
press PAUSE (Write) button.
2D: NTSC model
2F: PAL model
2F: PAL model
4
6
03
02
Press PAUSE (Write) button.
5
6
02
Check the data changes to
“01”.
“01”.
6
6
01
00
Press PAUSE (Write) button.
7
Perform “Modification of F,
63 to 6F Page Data”
63 to 6F Page Data”
2.
Modification of F, 63 to 6F Page Data
If the F, 63 to 6F page data has been initialized, change the data of
the “Fixed data-2” address shown in the following table by manual
input.
the “Fixed data-2” address shown in the following table by manual
input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If modification of data on pages F, set data: 00 to page: 0,
address: 10, and then select pages F.
3) If modification of data on pages 63 to 6F, set data: 06 to page:
0, address: 10, and then select pages 3 to F.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
4) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
the data built in the same model.
Note:
If copy the data built in the different model, the
camcorder may not operate.
camcorder may not operate.
5) When changing the data, press the PAUSE (Write) button of
the adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
data to write the data in the non-volatile memory.
6) Check that the data at the addresses for adjustment are initial
values (adjustment initial values) listed in the table.
If different, change them to the adjustment initial values.
If different, change them to the adjustment initial values.
Processing after Completing Modification F, 63 to 6F page
data:
data:
Order Page Address Data
Procedure
1
0
10
00
2
2
00
29
3
2
01
29
Press PAUSE (Write) button.
Click on the first or last page to see other HDR-HC3 / HDR-HC3E / HDR-HC3EK / HDR-HC3K (serv.man4) service manuals if exist.