Sony HDR-CX100 / HDR-CX100E / HDR-CX105E / HDR-CX106E / HDR-CX120 (serv.man2) Service Manual ▷ View online
HELP
HDR-CX100/CX100E/CX105E/CX106E/CX120_L2
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
HELP02:
Tape (W)
Tape (W)
HELP01:
Harness (HN-057)
HELP03:
Speaker Harness
Speaker Harness
Rib
Harness (HN-057) FP-1066 Flexible Board
CK-214 Board
HELP04:
VC Clip
HELP05:
VC Radiation Sheet (Lower)
VC Electrostatic Sheet
VC Electrostatic Sheet
VC Radiation Sheet (Lower) VC-559 Board
VC Electrostatic Sheet
IC1301
NTSC Model
PAL Model
VC Clip
FP-1069 Flexible Board
VC Clip
HELP
HDR-CX100/CX100E/CX105E/CX106E/CX120_L2
Marking Side
HELP07:
Magnet
Magnet
HELP08:
CM Radiation Sheet
CM Radiation Sheet
CM Radiation Sheet
CM-102 Board
CM-102 Board
HELP09:
FP-1070 Flexible Board/CM Sheet
CM Sheet
FP-1070 Flexible Board
FP-1070 Flexible Board
HELP06:
VC Radiation Sheet (Upper)
VC Radiation Sheet (Upper)
Hinge Cover (M)
Positioning Line
Positioning Line
Positioning Line
HELP
HDR-CX100/CX100E/CX105E/CX106E/CX120_L2
LOCK
OPEN
LOCK
OPEN
1
Move the cap of connector to direction of "OPEN"
and release the lock.
and release the lock.
Cap of Connector
Connector
Cap of Connector
MS-419 Board
2
The cap of connector is opened forward and
detach the Memory Stick (MS7304).
detach the Memory Stick (MS7304).
2
Shut the cap of connector.
3
Move the cap of connector to direction of "LOCK"
and lock it.
and lock it.
Memory Stick (MS7304)
Memory Stick (MS7304)
Cap of Connector
Cap of Connector
HELP10:
Detaching Method and Installation Method of Memory Stick (MS7304)
Detaching Method
1
Set the shape of the Memory Stick (MS7304) to
the position of the shape of the connector.
the position of the shape of the connector.
Installation Method
When replacing the internal memory (MS7304 that has been inserted in the MS-419 board),
start the Adjust Manual in the Adjust Station and execute the "INTERNAL MEMORY ADJUSTMENTS".
HELP
HDR-CX100/CX100E/CX105E/CX106E/CX120_L2
FP-1069
Hinge Cover (M)
Hinge Cover (C)
Valley
fold
fold
Valley
fold
fold
Mountain
fold
fold
Mountain
fold
fold
Adhesive tape
Stick it together in the adhesive tape
while bending the FP-1069 flexible board.
while bending the FP-1069 flexible board.
1
Fold dotted line parts of the FP-1069 flexible board
as shown in figure.
as shown in figure.
2
Install FP-1069 flexible board
in the Hinge Cover (M).
in the Hinge Cover (M).
3
Install the
Hinge Cover (C).
Adhesive tape
Claw
Claw
Claw
HELP11:
The Method of Attachment of FP-1069 Flexible Board
Click on the first or last page to see other HDR-CX100 / HDR-CX100E / HDR-CX105E / HDR-CX106E / HDR-CX120 (serv.man2) service manuals if exist.