Sony DCR-TRV340 Service Manual ▷ View online
— 4 —
DCR-TRV340
ÍNDICE
NOTA DE SERVIÇO
1.
POWER SUPPLY DURING REPAIRS ····························· 7
2.
TO TAKE OUT A CASSETTE WHEN NOT EJECT
(FORCE EJECT) ································································ 7
(FORCE EJECT) ································································ 7
FUNÇÃO DE AUTO DIAGNÓSTICO
1.
Self-diagnosis Function ······················································ 8
2.
Self-diagnosis Display ························································ 8
3.
Service Mode Display ························································ 8
3-1.
Display Method ·································································· 8
3-2.
Switching of Backup No. ··················································· 8
3-3.
End of Display ···································································· 8
4. Self-diagnosis Code Table ·················································· 9
1.
GENERAL
Main features ············································································· 1-1
Checking supplied accessories ·················································· 1-1
Quick Start Guide ······································································ 1-1
Getting Started
Checking supplied accessories ·················································· 1-1
Quick Start Guide ······································································ 1-1
Getting Started
Using this manual ·································································· 1-2
Step 1 Preparing the power supply ········································ 1-2
Installing the battery pack ··················································· 1-2
Charging the battery pack ·················································· 1-2
Connecting to a wall outlet ················································· 1-3
Step 2 Setting the date and time ············································ 1-3
Step 3 Inserting a cassette ······················································ 1-4
Step 1 Preparing the power supply ········································ 1-2
Installing the battery pack ··················································· 1-2
Charging the battery pack ·················································· 1-2
Connecting to a wall outlet ················································· 1-3
Step 2 Setting the date and time ············································ 1-3
Step 3 Inserting a cassette ······················································ 1-4
Recording – Basics
Recording a picture ································································ 1-4
Shooting backlit subjects – BACK LIGHT ··························· 1-6
Shooting in the dark – NightShot/Super NightShot/
Color Slow Shutter ····························································· 1-6
Self-timer recording (DCR-TRV340 only) ···························· 1-7
Checking recordings – END SEARCH/EDITSEARCH/
Rec Review ········································································· 1-7
Shooting backlit subjects – BACK LIGHT ··························· 1-6
Shooting in the dark – NightShot/Super NightShot/
Color Slow Shutter ····························································· 1-6
Self-timer recording (DCR-TRV340 only) ···························· 1-7
Checking recordings – END SEARCH/EDITSEARCH/
Rec Review ········································································· 1-7
Playback – Basics
Playing back a tape ································································ 1-7
To display the screen indicators – Display function ··········· 1-8
Viewing recordings on TV ····················································· 1-8
To display the screen indicators – Display function ··········· 1-8
Viewing recordings on TV ····················································· 1-8
Advanced Recording Operations
Recording still images on a tape – Tape Photo recording ······ 1-9
Using the wide mode ····························································· 1-9
Using the fader function ····················································· 1-10
Using special effects – Picture effect ··································· 1-11
Using special effects – Digital effect ··································· 1-11
Using the PROGRAM AE function ····································· 1-12
Adjusting the exposure manually ········································ 1-12
Focusing manually ······························································· 1-12
Interval recording ································································· 1-13
Frame by frame recording – Frame recording ····················· 1-13
Superimposing a title ··························································· 1-13
Making your own titles ························································ 1-14
Inserting a scene ·································································· 1-14
Using the wide mode ····························································· 1-9
Using the fader function ····················································· 1-10
Using special effects – Picture effect ··································· 1-11
Using special effects – Digital effect ··································· 1-11
Using the PROGRAM AE function ····································· 1-12
Adjusting the exposure manually ········································ 1-12
Focusing manually ······························································· 1-12
Interval recording ································································· 1-13
Frame by frame recording – Frame recording ····················· 1-13
Superimposing a title ··························································· 1-13
Making your own titles ························································ 1-14
Inserting a scene ·································································· 1-14
Advanced Playback Operations
Playing back tapes with picture effects ································ 1-15
Playing back tapes with digital effects ································ 1-15
Enlarging recorded images – Tape PB ZOOM ···················· 1-15
Quickly locating a scene – ZERO SET MEMORY ············· 1-16
Searching a recording by date – DATE SEARCH ··············· 1-16
Searching for a photo
– PHOTO SEARCH/PHOTO SCAN ································ 1-16
Playing back tapes with digital effects ································ 1-15
Enlarging recorded images – Tape PB ZOOM ···················· 1-15
Quickly locating a scene – ZERO SET MEMORY ············· 1-16
Searching a recording by date – DATE SEARCH ··············· 1-16
Searching for a photo
– PHOTO SEARCH/PHOTO SCAN ································ 1-16
Editing
Dubbing a tape ····································································· 1-17
Dubbing only desired scenes – Digital program editing
(on tapes) ·········································································· 1-17
Capturing images from an analog video unit on your
computer – Signal convert function ·································· 1-21
Dubbing only desired scenes – Digital program editing
(on tapes) ·········································································· 1-17
Capturing images from an analog video unit on your
computer – Signal convert function ·································· 1-21
Recording video or TV programs ········································ 1-21
Inserting a scene from a VCR – Insert Editing ···················· 1-22
Viewing images recorded on a tape on your computer
(Windows users only) ······················································· 1-22
Inserting a scene from a VCR – Insert Editing ···················· 1-22
Viewing images recorded on a tape on your computer
(Windows users only) ······················································· 1-22
Customizing Your Camcorder
Changing the menu settings ················································· 1-25
“Memory Stick” operations (DCR-TRV340 only)
Using “Memory Stick” – Introduction ································ 1-28
Recording still images on “Memory Stick”s
– Memory Photo recording ··············································· 1-30
Superimposing a still image in the “Memory Stick”
on an image – MEMORY MIX ········································ 1-31
Recording images from a tape as still images ····················· 1-32
Copying still images from a tape – PHOTO SAVE ············· 1-33
Recording moving pictures on “Memory Stick”s
– MPEG movie recording ················································· 1-34
Recording pictures from a tape as moving pictures ············· 1-34
Recording edited pictures as a moving picture
– Digital program editing (on “Memory Stick”s) ············· 1-35
Viewing still images – Memory Photo playback ················· 1-36
Viewing moving pictures – MPEG movie playback ············ 1-37
Viewing images recorded on “Memory Stick”s
on your computer ······························································ 1-37
Copying images recorded on “Memory Stick”s to tape ······ 1-40
Enlarging still images recorded on “Memory Stick”s
– Memory PB ZOOM ······················································· 1-40
Playing back images in a continuous loop – SLIDE SHOW ··· 1-41
Preventing accidental erasure – Image protection ··············· 1-41
Deleting images – DELETE ················································ 1-41
Writing a print mark – PRINT MARK ································ 1-42
Using the optional printer ···················································· 1-43
Recording still images on “Memory Stick”s
– Memory Photo recording ··············································· 1-30
Superimposing a still image in the “Memory Stick”
on an image – MEMORY MIX ········································ 1-31
Recording images from a tape as still images ····················· 1-32
Copying still images from a tape – PHOTO SAVE ············· 1-33
Recording moving pictures on “Memory Stick”s
– MPEG movie recording ················································· 1-34
Recording pictures from a tape as moving pictures ············· 1-34
Recording edited pictures as a moving picture
– Digital program editing (on “Memory Stick”s) ············· 1-35
Viewing still images – Memory Photo playback ················· 1-36
Viewing moving pictures – MPEG movie playback ············ 1-37
Viewing images recorded on “Memory Stick”s
on your computer ······························································ 1-37
Copying images recorded on “Memory Stick”s to tape ······ 1-40
Enlarging still images recorded on “Memory Stick”s
– Memory PB ZOOM ······················································· 1-40
Playing back images in a continuous loop – SLIDE SHOW ··· 1-41
Preventing accidental erasure – Image protection ··············· 1-41
Deleting images – DELETE ················································ 1-41
Writing a print mark – PRINT MARK ································ 1-42
Using the optional printer ···················································· 1-43
Troubleshooting
Types of trouble and how to correct trouble ························ 1-43
Self-diagnosis display ·························································· 1-45
Warning indicators and messages ········································ 1-45
Self-diagnosis display ·························································· 1-45
Warning indicators and messages ········································ 1-45
Additional Information
Digital8
system, recording and playback ························ 1-45
About the “InfoLITHIUM” battery pack ····························· 1-46
About i.LINK ······································································· 1-46
Using your camcorder abroad ·············································· 1-47
Maintenance information and precautions ··························· 1-47
About i.LINK ······································································· 1-46
Using your camcorder abroad ·············································· 1-47
Maintenance information and precautions ··························· 1-47
Quick Reference
Identifying parts and controls ·············································· 1-48
2. DESMONTAGEM
2-1.
LCD UNIT, PD-160 BOARD ········································· 2-2
2-2.
FRONT PANEL SECTION, SI-032 BOARD ················· 2-3
2-3.
CABINET (R) SECTION ··············································· 2-4
2-4.
LENS SECTION, CD-357 BOARD ······························· 2-5
2-5.
EVF SECTION, LB-076 BOARD ·································· 2-6
2-6.
BATTERY PANEL SECTION,
BATTERY TERMINAL BOARD ··································· 2-7
BATTERY TERMINAL BOARD ··································· 2-7
2-7.
MEMORY STICK 10P CONNECTOR
(MEMORY STICK MODEL) (TRV340) ······················· 2-7
(MEMORY STICK MODEL) (TRV340) ······················· 2-7
2-8.
CONTROL SWITCH BLOCK (SS-1380) ······················ 2-8
2-9.
CABINET (L) SECTION,
CS FRAME ASSEMBLY (25) ········································ 2-8
CS FRAME ASSEMBLY (25) ········································ 2-8
2-10. VC-276 BOARD ····························································· 2-9
2-11. MECHANISM DECK ····················································· 2-9
2-12. CONTROL SWITCH BLOCK (CF-2500) ··················· 2-12
2-13. CONTROL SWITCH BLOCK (FK-2500) ··················· 2-12
2-14. HINGE SECTION ························································· 2-13
2-15. CIRCUIT BOARDS LOCATION ································· 2-14
2-16. FLEXIBLE BOARDS LOCATION ······························ 2-15
2-11. MECHANISM DECK ····················································· 2-9
2-12. CONTROL SWITCH BLOCK (CF-2500) ··················· 2-12
2-13. CONTROL SWITCH BLOCK (FK-2500) ··················· 2-12
2-14. HINGE SECTION ························································· 2-13
2-15. CIRCUIT BOARDS LOCATION ································· 2-14
2-16. FLEXIBLE BOARDS LOCATION ······························ 2-15
— 5 —
DCR-TRV340
3. DIAGRAMAS EM BLOCOS
3-1.
OVERALL BLOCK DIAGRAM (1/5) ··························· 3-1
3-2.
OVERALL BLOCK DIAGRAM (2/5) ··························· 3-3
3-3.
OVERALL BLOCK DIAGRAM (3/5) ··························· 3-5
3-4.
OVERALL BLOCK DIAGRAM (4/5) ··························· 3-7
3-5.
OVERALL BLOCK DIAGRAM (5/5)(DCR-TRV240) ···· 3-9
3-5.
OVERALL BLOCK DIAGRAM (5/5)(DCR-TRV340) ··· 3-11
3-6.
POWER BLOCK DIAGRAM (1/3) ······························ 3-13
3-7.
POWER BLOCK DIAGRAM (2/3) ······························ 3-15
3-8.
POWER BLOCK DIAGRAM (3/3) ······························ 3-17
4. PLACAS DE CIRCUITO IMPRESSO E
DIAGRAMAS ESQUEMÁTICO
4-1.
FRAME SCHEMATIC DIAGRAM (1/2) ······················· 4-1
FRAME SCHEMATIC DIAGRAM (2/2) ······················· 4-3
FRAME SCHEMATIC DIAGRAM (2/2) ······················· 4-3
4-2.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS ············································ 4-5
SCHEMATIC DIAGRAMS ············································ 4-5
• CD-357 (CCD IMAGER)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ······························ 4-7
SCHEMATIC DIAGRAM ······························ 4-7
• LB-076 (EVF, BACK LIGHT)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ······························ 4-9
SCHEMATIC DIAGRAM ······························ 4-9
• SI-032 (STEADY SHOT, LASER LINK)
PRINTED WIRING BOARD ······················· 4-11
• FP-411 FLEXIBLE BOARD ····································· 4-12
• SI-032 (STEADY SHOT, LASER LINK)
• SI-032 (STEADY SHOT, LASER LINK)
SCHEMATIC DIAGRAM ···························· 4-13
• PD-160 (CHA, DISPLAY DRIVE, BACK LIGHT, LCD
DRIVE, TG)
PRINTED WIRING BOARD ······················· 4-15
• FP-412 FLEXIBLE BOARD ····································· 4-18
• PD-160 (CHA, DISPLAY DRIVE, BACK LIGHT)(1/2)
• PD-160 (CHA, DISPLAY DRIVE, BACK LIGHT)(1/2)
SCHEMATIC DIAGRAM ···························· 4-19
• PD-160 (LCD DRIVE, TG)(2/2)
SCHEMATIC DIAGRAM ···························· 4-21
• CONTROL SWITCH BLOCK (CF-2500, FK-2500)
SCHEMATIC DIAGRAM ···························· 4-23
• LS-057 (S/T REEL SENSOR), FP-228 (DEW SENSOR),
FP-299 (MODE SWITCH), FP-300 (TAPE TOP),
FP-302 (TAPE END), FP-301 (TAPE LED)
FP-302 (TAPE END), FP-301 (TAPE LED)
FLEXIBLE BOARDS AND
SCHEMATIC DIAGRAMS ·························· 4-25
SCHEMATIC DIAGRAMS ·························· 4-25
• CONTROL SWITCH BLOCK (SS-1380)
SCHEMATIC DIAGRAM ···························· 4-27
• FP-410 FLEXIBLE BOARD ····································· 4-28
Shematic diagram and printed wiring board of the
VC-276 board are not shown.
Pages from 4-29 to 4-82 are not shown.
VC-276 board are not shown.
Pages from 4-29 to 4-82 are not shown.
4-3.
WAVEFORMS ······························································ 4-83
Waveforms and mounted parts location of the
VC-276 board are not shown.
Pages from 4-85 to 4-89 are not shown.
VC-276 board are not shown.
Pages from 4-85 to 4-89 are not shown.
4-4.
MOUNTED PARTS LOCATION ································· 4-90
5. AJUSTES
1.
Adjusting items when replacing main parts and boards ·· 5-2
5-1.
CAMERA SECTION ADJUSTMENT ··························· 5-4
1-1.
PREPARATIONS BEFORE ADJUSTMENT
(CAMERA SECTION) ··················································· 5-4
(CAMERA SECTION) ··················································· 5-4
1-1-1. List of Service Tools ························································ 5-4
1-1-2. Preparations ····································································· 5-5
1-1-2. Preparations ····································································· 5-5
1-1-3. Precaution ········································································ 5-7
1.
1.
Setting the Switch ···························································· 5-7
2.
Order of Adjustments ······················································ 5-7
3.
Subjects ··········································································· 5-7
1-2.
INITIALIZATION OF 8, A, B, C, D, E, F, 1B, 1C, 1F
PAGE DATA ···································································· 5-8
PAGE DATA ···································································· 5-8
1-2-1. INITIALIZATION OF D PAGE DATA
(DCR-TRV240) ······························································· 5-9
1.
Initializing the D Page Data ············································ 5-9
2.
Modification of D Page Data ··········································· 5-9
3.
D Page Table ···································································· 5-9
1-2-2. INITIALIZATION OF A, D PAGE DATA
(DCR-TRV340) ····························································· 5-10
1.
Initializing the A, D Page Data ······································ 5-10
2.
Modification of A, D Page Data ···································· 5-10
3.
D Page Table ·································································· 5-10
4.
A Page Table ·································································· 5-10
1-2-3. INITIALIZATION OF B, 1B PAGE DATA
(DCR-TRV340) ····························································· 5-11
1.
Initializing the B, 1B Page Data ···································· 5-11
2.
Modification of B, 1B Page Data ·································· 5-11
3.
Loader writing inhibit mode setting ······························ 5-11
4.
B Page Table ·································································· 5-11
5.
1B Page Table ································································ 5-11
1-2-4. INITIALIZATION OF 8, C, 1C PAGE DATA ·············· 5-12
1.
1.
Initializing the 8, C, 1C Page Data ································ 5-12
2.
Modification of 8, C, 1C Page Data ······························ 5-12
3.
C Page Table ·································································· 5-12
4.
8 Page Table ··································································· 5-14
5.
1C Page Table ································································ 5-14
1-2-5. INITIALIZATION OF E, F, 1F PAGE DATA ··············· 5-15
1.
1.
Initializing the E, F, 1F Page Data ································· 5-15
2.
Modification of E, F, 1F Page Data ······························· 5-15
3.
F Page Table ·································································· 5-15
4.
E Page Table ·································································· 5-16
5.
1F Page Table ································································ 5-16
1-3.
CAMERA SYSTEM ADJUSTMENTS ························ 5-17
1.
HALL Adjustment ························································· 5-17
2.
Flange Back Adjustment (Using Minipattern Box) ······· 5-18
3.
Flange Back Adjustment (Using Flange Back Adjustment
Chart and Subject More Than 500m Away) ·················· 5-19
Chart and Subject More Than 500m Away) ·················· 5-19
3-1.
Flange Back Adjustment (1) ·········································· 5-19
3-2.
Flange Back Adjustment (2) ·········································· 5-19
4.
Flange Back Check ························································ 5-20
5.
Optical Axis Adjustment ··············································· 5-21
6.
Picture Frame Setting ···················································· 5-22
7.
Color Reproduction Adjustment ···································· 5-23
8.
Auto White Balance & LV Standard Data Input ··········· 5-23
9.
Auto White Balance Adjustment ··································· 5-24
10.
White Balance Check ···················································· 5-25
11.
Steady Shot Check ························································· 5-26
1-4.
ELECTRONIC VIEWFINDER SYSTEM
ADJUSTMENT ····························································· 5-27
ADJUSTMENT ····························································· 5-27
1.
VCO Adjustment (VC-276 board) ································ 5-27
2.
RGB AMP Adjustment (VC-276 board) ······················· 5-28
3.
Contrast Adjustment (VC-276 board) ··························· 5-28
1-5.
LCD SYSTEM ADJUSTMENT ··································· 5-29
1.
VCO Adjustment (PD-160 board) ································· 5-29
2.
PSIG Gray Adjustment (PD-160 board) ························ 5-30
3.
RGB AMP Adjustment (PD-160 board) ························ 5-30
4.
Black Limit Adjustment (PD-160 board) ······················ 5-31
5.
Contrast Adjustment (PD-160 board) ···························· 5-31
6.
Center Level Adjustment (PD-160 board) ····················· 5-32
7.
V-COM Adjustment (PD-160 board) ···························· 5-32
8.
White Balance Adjustment (PD-160 board) ·················· 5-33
5-2.
MECHANISM SECTION ADJUSTMENT ·················· 5-34
2-1.
Hi8/STANDARD 8 MODE ··········································· 5-34
— 6 —
DCR-TRV340
2-1-1. OPERATING WITHOUT CASSETTE ························ 5-34
2-1-2. TAPE PATH ADJUSTMENT ········································ 5-34
1.
2-1-2. TAPE PATH ADJUSTMENT ········································ 5-34
1.
Preparations for Adjustment ·········································· 5-34
2-2.
DIGITAL8 MODE ························································ 5-35
2-2-1. HOW TO ENTER RECORD MODE WITHOUT
CASSETTE ··································································· 5-35
2-2-2. HOW TO ENTER PLAYBACK MODE WITHOUT
CASSETTE ··································································· 5-35
2-2-3. OVERALL TAPE PATH CHECK ································· 5-35
1.
1.
Recording of the tape path check signal ························ 5-35
2.
Tape path check ····························································· 5-35
5-3.
VIDEO SECTION ADJUSTMENT ······························ 5-36
3-1.
PREPARATIONS BEFORE ADJUSTMENTS ············ 5-36
3-1-1. Equipment to Required ·················································· 5-36
3-1-2. Precautions on Adjusting ··············································· 5-37
3-1-3. Adjusting Connectors ···················································· 5-38
3-1-4. Connecting the Equipment ············································ 5-38
3-1-5. Alignment Tape ····························································· 5-39
3-1-6. Input/output Level and Impedance ································ 5-39
3-2.
3-1-2. Precautions on Adjusting ··············································· 5-37
3-1-3. Adjusting Connectors ···················································· 5-38
3-1-4. Connecting the Equipment ············································ 5-38
3-1-5. Alignment Tape ····························································· 5-39
3-1-6. Input/output Level and Impedance ································ 5-39
3-2.
SYSTEM CONTROL SYSTEM ADJUSTMENT ········ 5-40
1.
Initialization of 8, A, B, C, D, E, F, 1B, 1C, 1F Page
Data ··············································································· 5-40
Data ··············································································· 5-40
2.
Serial No. Input ····························································· 5-40
2-1.
Company ID Input ························································· 5-40
2-2.
Serial No. Input ····························································· 5-40
3-3.
SERVO AND RF SYSTEM ADJUSTMENT ··············· 5-42
1.
REEL FG Adjustment (VC-276 board) ························· 5-42
2.
PLL f
0
& LPF f
0
Adjustment (VC-276 board) ·············· 5-42
3.
Switching Position Adjustment (VC-276 board) ··········· 5-43
4.
AGC Center Level and APC & AEQ Adjustment ········· 5-43
4-1.
Preparations before adjustments ···································· 5-43
4-2.
AGC Center Level Adjustment (VC-276 board) ··········· 5-43
4-3.
APC & AEQ Adjustment (VC-276 board) ···················· 5-44
4-4.
Processing after Completing Adjustments ···················· 5-44
5.
PLL f
0
& LPF f
0
Fine Adjustment (VC-276 board) ······ 5-45
6.
Hi8/Standard8 Switching Position Adjustment
(VC-276 board) ····························································· 5-45
(VC-276 board) ····························································· 5-45
7.
CAP FG Duty Adjustment (VC-276 board) ·················· 5-46
3-4.
VIDEO SYSTEM ADJUSTMENTS ····························· 5-47
1.
27MHz Origin Oscillation Adjustment (VC-276 board) ·· 5-47
2.
S VIDEO OUT Y Level Adjustment (VC-276 board) ··· 5-47
3.
S VIDEO OUT Chroma Level Adjustment
(VC-276 board) ····························································· 5-48
(VC-276 board) ····························································· 5-48
4.
VIDEO OUT Y, Chroma Level Check (VC-276 board) ·· 5-48
5.
Hi8/Standard8 Y/C Output Level Setting
(VC-276 board) ····························································· 5-49
(VC-276 board) ····························································· 5-49
6.
Hi8/standard 8mm AFC f
0
Adjustment (VC-276 board) · 5-49
3-5.
AUDIO SYSTEM ADJUSTMENTS ···························· 5-50
1.
Hi8/Standard8 AFM BPF f
0
Adjustment
(VC-276 board) ····························································· 5-50
2.
Hi8/Standard8 AFM 1.5 MHz Deviation Adjustment
(VC-276 board) ····························································· 5-51
(VC-276 board) ····························································· 5-51
3.
Hi8/Standard8 AFM 1.7 MHz Deviation Adjustment
(VC-276 board) ····························································· 5-51
(VC-276 board) ····························································· 5-51
4.
Digital8 Playback Level Check ····································· 5-51
5.
Overall Level Characteristics Check ····························· 5-51
6.
Overall Distortion Check ··············································· 5-51
7.
Overall Noise Level Check ············································ 5-52
8.
Overall Separation Check ·············································· 5-52
5-4.
SERVICE MODE ·························································· 5-53
4-1.
ADJUSTMENT REMOTE COMMANDER ················ 5-53
1.
Using the Adjustment Remote Commander ·················· 5-53
2.
Precautions Upon Using the Adjustment Remote
Commander ··································································· 5-53
Commander ··································································· 5-53
4-2.
DATA PROCESS ··························································· 5-54
4-3.
SERVICE MODE ·························································· 5-55
1.
Setting the Test Mode ···················································· 5-55
2.
Emergence Memory Address ········································ 5-55
2-1.
EMG Code (Emergency Code) ····································· 5-55
2-2.
MSW Code ···································································· 5-56
3.
Bit Value Discrimination ··············································· 5-57
4.
Switch check (1) ···························································· 5-57
5.
Switch check (2) ···························································· 5-58
6.
Switch check (3) ···························································· 5-58
7.
Switch check (4) ···························································· 5-59
8.
Record of Use check (1) ················································ 5-60
9.
Record of Use check (2) ················································ 5-60
10.
Record of Self-diagnosis check ····································· 5-61
6. LISTA DE PEÇAS PARA REPOSIÇÃO
6-1.
EXPLODED VIEWS ······················································ 6-1
6-1-1. OVERALL SECTION ····················································· 6-1
6-1-2. CABINET (L) SECTION-1 ············································ 6-2
6-1-3. CABINET (L) SECTION-2 ············································ 6-3
6-1-4. LENS, EVF SECTION ···················································· 6-4
6-1-5. CABINET (R) SECTION ··············································· 6-5
6-1-6. LCD SECTION ······························································· 6-6
6-1-7. CASSETTE COMPARTMENT ASSY, DRUM ASSY ··· 6-7
6-1-8. LS CHASSIS BLOCK ASSEMBLY ······························· 6-8
6-1-9. MECHANICAL CHASSIS BLOCK ASSEMBLY-1 ······ 6-9
6-1-10. MECHANICAL CHASSIS BLOCK ASSEMBLY-2 ·· 6-10
6-2.
6-1-2. CABINET (L) SECTION-1 ············································ 6-2
6-1-3. CABINET (L) SECTION-2 ············································ 6-3
6-1-4. LENS, EVF SECTION ···················································· 6-4
6-1-5. CABINET (R) SECTION ··············································· 6-5
6-1-6. LCD SECTION ······························································· 6-6
6-1-7. CASSETTE COMPARTMENT ASSY, DRUM ASSY ··· 6-7
6-1-8. LS CHASSIS BLOCK ASSEMBLY ······························· 6-8
6-1-9. MECHANICAL CHASSIS BLOCK ASSEMBLY-1 ······ 6-9
6-1-10. MECHANICAL CHASSIS BLOCK ASSEMBLY-2 ·· 6-10
6-2.
ELECTRICAL PARTS LIST ········································ 6-11
Parts list of the VC-276 board are not shown.
Pages from 6-14 to 6-25 are not shown.
Pages from 6-14 to 6-25 are not shown.
*
Optical axis frame and Color reproduction frame are
shown on pages 206 and 207.
— 7 —
DCR-TRV340
NOTA DE SERVIÇO
1.
POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied (8.4V) to the battery terminal using the service power code (J-6082-223-A), the power
is shut off so that the unit cannot operate.
These following two methods are available to prevent this. Take note of which to use during repairs.
is shut off so that the unit cannot operate.
These following two methods are available to prevent this. Take note of which to use during repairs.
Method 1.
Use the DC IN terminal. (Use the AC power adaptor.)
Method 2.
Connect the adjustment remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the HOLD switch to the “ADJ” side.
2.
TO TAKE OUT A CASSETTE WHEN NOT EJECT (FORCE EJECT)
1
Refer to 2-2. to remove the front panel section.
2
Refer to 2-3. to remove the cabinet (upper) section.
3
Refer to 2-3. to remove the cabinet (R) section.
4
Refer to 2-4. to remove the lens section.
5
Refer to 2-5. to remove the EVF section.
6
Refer to 2-6. to remove the battery panel section.
7
Refer to 2-8. and 2-9. to remove the cabinet (L) section. (Include the CS frame assembly and control switch block (SS-1380).)
8
Disconnect CN4401 (2P) of VC-276 board.
9
Add +5V from the DC POWER SUPPLY and unload with a pressing the cassette compertment.
qa
Let your hold the cassette
compartment and rise the cassette
compartment to take out a cassette.
compartment to take out a cassette.
DC power supply
(+5V)
Loading
motor
motor
Adjust the bending
of a tape
of a tape
Timing belt
Press the cassette compartment not
to rise the cassette compartment
to rise the cassette compartment
Disconnect CN4401 of
VC-276 board
VC-276 board
0
Pull the timing belt in the direction of
arrow
arrow
A
with a pincette while pressing
the cassette compartment (take care
not to damage) to adjust the bending
of a tape.
not to damage) to adjust the bending
of a tape.
Pincette
Timing belt
A
Click on the first or last page to see other DCR-TRV340 service manuals if exist.