Sony DCR-TRV250 (serv.man3) Service Manual ▷ View online
37
Recording
–
Basics
Recording a picture
Remaining battery time indicator
The remaining battery time indicator indicates the approximate recording time. The
indicator may not be correct, depending on the conditions in which you are recording.
When you close the LCD panel and open it again, it takes about one minute for the
correct remaining battery time in minutes to be displayed.
The remaining battery time indicator indicates the approximate recording time. The
indicator may not be correct, depending on the conditions in which you are recording.
When you close the LCD panel and open it again, it takes about one minute for the
correct remaining battery time in minutes to be displayed.
Time code (for tapes recorded in the Digital8 system only)
•When you play back tapes recorded in the Hi8
/standard 8 mm system, the
tape counter appears on the screen.
•The time code indicates the recording or playback time, “0:00:00” (hours:minutes:
seconds) in CAMERA mode and “0:00:00:00” (hours:minutes:seconds:frames) in VCR
mode. You cannot rewrite only the time code. You cannot reset the time code or the
tape counter.
mode. You cannot rewrite only the time code. You cannot reset the time code or the
tape counter.
Data code
The data code (date/time or various settings when recorded) are not displayed while
recording. However, they are recorded automatically onto tape. To display the data
code, press DATA CODE on the Remote Commander during playback (p. 47).
recording. However, they are recorded automatically onto tape. To display the data
code, press DATA CODE on the Remote Commander during playback (p. 47).
38
Shooting a backlit subject – BACK LIGHT
When you shoot a subject with the light source behind the subject or a subject with a
light background, use the backlight function.
light background, use the backlight function.
Set the POWER switch to CAMERA or MEMORY, and press BACK LIGHT.*
The . indicator appears on the screen.
To cancel the backlight function, press BACK LIGHT again.
The . indicator appears on the screen.
To cancel the backlight function, press BACK LIGHT again.
If you press EXPOSURE when shooting backlit subjects
The backlight function will be canceled.
The backlight function will be canceled.
* Modes on the POWER switch vary depending on models (p. 16).
Recording a picture
BACK LIGHT
39
Recording
–
Basics
Recording a picture
Shooting in the dark – NightShot
– Super NightShot
– Color Slow Shutter
The NightShot function enables you to shoot a subject in a dark place. For example, you
can satisfactorily record the environment of nocturnal animals for observation when
you use this function.
can satisfactorily record the environment of nocturnal animals for observation when
you use this function.
Using NightShot
Set the POWER switch to CAMERA or MEMORY, and slide NIGHTSHOT to ON.*
The
The
indicator and “NIGHTSHOT” flash on the screen.
To cancel the NightShot function, slide NIGHTSHOT to OFF.
Using the Super NightShot
The Super NightShot function makes subjects up to 16 times brighter than those
recorded in the NightShot mode.
recorded in the NightShot mode.
(1) Set the POWER switch to CAMERA, and slide NIGHTSHOT to ON. The
indicator and “NIGHTSHOT” flash on the screen.
(2) Press SUPER NS. The
indicator and “SUPER NIGHTSHOT” flash on the
screen.
To cancel the Super NightShot function, press SUPER NS again. Your
camcorder returns to the NightShot mode.
To cancel the Super NightShot function, press SUPER NS again. Your
camcorder returns to the NightShot mode.
Using the NightShot Light
The picture will be clearer with the NightShot Light on. To enable NightShot Light, set
N.S.LIGHT to ON in the menu settings. (The default setting is ON.) (p. 213)
N.S.LIGHT to ON in the menu settings. (The default setting is ON.) (p. 213)
* Modes on the POWER switch vary depending on models (p. 16).
OFF
ON
NIGHTSHOT
COLOR SLOW S
SUPER NS
Infrared rays
(NightShot Light)
emitter
(NightShot Light)
emitter
40
Using Color Slow Shutter
The Color Slow Shutter function enables you to record color images in a dark place.
(1) Set the POWER switch to CAMERA, and slide NIGHTSHOT to OFF.
(2) Press COLOR SLOW S.
(2) Press COLOR SLOW S.
The
indicator and COLOR SLOW SHUTTER flash on the screen.
To cancel the Color Slow Shutter function, press COLOR SLOW S again.
Notes
•Do not use the NightShot function in bright places (e.g. outdoors in the daytime). This
•Do not use the NightShot function in bright places (e.g. outdoors in the daytime). This
may cause your camcorder to malfunction.
•When you keep NIGHTSHOT set to ON in normal recording, the picture may be
recorded in incorrect or unnatural colors.
•If focusing is difficult with the autofocus mode when using the NightShot function,
focus manually.
While using the NightShot function, you cannot use the following functions:
– Exposure
– PROGRAM AE
– Exposure
– PROGRAM AE
While using the Super NightShot or Color Slow Shutter function, you cannot use
the following functions
the following functions
:
– Fader
– Digital effect
– Exposure
– PROGRAM AE
– Digital effect
– Exposure
– PROGRAM AE
While using the Super NightShot or Color Slow Shutter function
The shutter speed is automatically adjusted depending on the brightness. The motion of
the picture will be slow.
the picture will be slow.
NightShot Light
NightShot Light rays are infrared and so are invisible. The maximum shooting distance
using the NightShot Light is about 3 m (10 feet).
While recording, be sure not to cover the infrared rays emitter with your fingers, etc.
NightShot Light rays are infrared and so are invisible. The maximum shooting distance
using the NightShot Light is about 3 m (10 feet).
While recording, be sure not to cover the infrared rays emitter with your fingers, etc.
In total darkness
The Color Slow Shutter function may not work normally.
Recording a picture
Click on the first or last page to see other DCR-TRV250 (serv.man3) service manuals if exist.